---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Wed 11/07/18: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 0. 04:14 AM - [PLEASE READ] Why I Have A Fund Raiser... (Matt Dralle) 1. 04:33 AM - Re: MIG or TIG? (Santal) 2. 03:13 PM - Airport Courtesy Cars Update-Not Topic Related (gbrasch) ________________________________ Message 0 _____________________________________ Time: 04:14:38 AM PST US From: Matt Dralle Subject: Pietenpol-List: [PLEASE READ] Why I Have A Fund Raiser... Since the beginning, the Matronics List and Forum experience has been free from advertising. I have been approached by fair number of vendors wanting to tap into the large volume of activity across the various lists hosted here, but have always flatly refused. Everywhere you go on the Internet these days, a user is pummeled with flashing banners and videos and ads for crap that they don't want. Yahoo, Google and that ilk are not "free". The user must constantly endure their barrage of commercialism thrust into their face at an ever increasing rate. Enough is enough, and the Lists at Matronics choose not to succumb to that. That being said, running a service of this size is not "free". It costs a lot of money to maintain the hardware, pay for the electricity, Commercial-greade Internet Connection, air conditioning, maintenance contracts, etc, etc. etc. I choose to hold a PBS-like fund raiser each year during the month of November where I simply send out a short email every other day asking the members to make a small contribution to support the operation. That being said, that contribution is completely voluntary and non-compulsory. Many members choose not to contribute and that's fine. However, a very modest percentage of the members do choose to make a contribution and it is that financial support that keeps the Lists running. And that's it. To my way of thinking, it is a much more pleasant way of maintaining the Lists and Forums. The other 11 months of the year, you don't see a single advertisement or request for support. That's refreshing and that is a List and Forum that I want to belong to. I think other people feel the same way. Won't you please take a minute to make your Contribution today and support these Lists? http://www.matronics.com/contribution Or, drop a personal check in the mail to: Matt Dralle / Matronics 581 Jeannie Way Livermore CA 94550 USA Thank you for your support! Matt Dralle Email List Admin. ________________________________ Message 1 _____________________________________ Time: 04:33:56 AM PST US Subject: Pietenpol-List: Re: MIG or TIG? From: "Santal" I think I'll bump this one and give you my two cents as I have my own opinion on this one I have never used a 220 VAC MIG welder before but asking a lot of questions before I bought mine (one of them was from a friend who repaired welders for a living), there are some things to point out. Unlike a 240 VAC welder, you cannot just go out and move from the max 3/16 material (usually considered the limit to a one pass weld with a 120VAC MIG Welder) to heavier materials; gas shielded welding does not allow you that extra bit the shielded wire does. Gas does not let you weld in heavy winds (outside hopefully) like shielded wire does but shielded wire welding is messy like ARC welding is. Going from shielded wire to gas, in most of the small machines, requires a different liner and (maybe) changing the polarity of the electrical connection (its been too long since I did my setup). Some things to consider: can you get parts for the welder, can it be repaired locally, can it be converted to work with gas or must it be limited to using shielded wire welding (advantages maybe). Remember, 120 welders are light weight welders and not really that comparable to a 220 unit. They do a good job within their limitations but also have a service limit (I forget the proper word) that is lower than what a 220 unit would have. Of the welders that usually would meet the conditions above, there are three I would recommend: 1. the Miller that has adjustable power settings along with adjustable wire setting, 2. The Miller is closely followed by the Lincoln unit which has similar features. 3. The Hobart would be the third because it still has preset power settings and its welding tips use a different thread count so they could be harder to find. Each of these machines is usually available, and can be serviced, most anywhere you go. (I didn't know that Eastwood had gone the additional variable switch that DWP has talked about) That being said, I have two Hobart welders and like them very well. The Hobart 120 is the unit that had the technology that Miller was after when it bought out Hobart. I also have a Hobart 135 which is a good welder but in my opinion just not as good as the 120. I have not had any problems with the 135, but it does feel different. If you happened to catch it, this last weekend Extreme 4X4 had a show (rerun) on MIG welding and how to set them up and in a couple of places gas was discussed and so was wire choice. One other thing that has been said; an extension cord or a long power cord is not always the best thing to use. The voltage drop can be very noticeable, especially if you do not use a cord with a gage of wire that is compatible with the voltage needed over the length of the power cord. Commercial extension cords have a tendency to be too light of weight to satisfactorily be used with a welder. I hope this helps. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=484565#484565 ________________________________ Message 2 _____________________________________ Time: 03:13:23 PM PST US Subject: Pietenpol-List: Airport Courtesy Cars Update-Not Topic Related From: "gbrasch" Last November I stated I would only bother you with a fund raising email once a year, so here we are a year later. Airport Courtesy Cars relies about 75% on user donations. If you use the site, please consider a small donation. Currently the site lists over 1,900 cars nationwide, 100 MOGAS locations, over 60 pictures of the cars themselves and several airport cafes. Also this past year all the airport IDs are now links to AirNav. I rely on your input to keep the site up to date. Secure donations can be made using the PayPal links on the site or our mailing address, Airport Courtesy Cars LLC. POB 85762, Tucson, Arizona 85754. Thank you, Glenn Airportcars101 (at) gmail.com ** Do Not Archive ** -------- Glenn Brasch RV-9A Flying Medevac Helicopter Pilot (Ret) Owner, "Airport Courtesy Cars" Website www.airportcourtesycars.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p=484604#484604 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.