---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Tue 02/12/19: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:32 AM - Re: Re: Ragwing Ultra-Piet (Clif Dawson) 2. 06:32 AM - Re: Pietenpol-List Digest: 4 Msgs - 02/11/19 (dndboyd2@gmail.com) 3. 06:32 AM - Re: Pietenpol-List Digest: 4 Msgs - 02/11/19 (dndboyd2@gmail.com) 4. 08:14 AM - Re: Ragwing Ultra-Piet (taildrags) 5. 11:33 PM - Re: Re: Ragwing Ultra-Piet (Clif Dawson) ________________________________ Message 1 _____________________________________ Time: 01:32:19 AM PST US From: "Clif Dawson" Subject: Re: Pietenpol-List: Re: Ragwing Ultra-Piet Facebook has only one mandate. Take every last bit of your life and sell it to any and all businesses that will make a profit off it. That goes for gubmint also. Big Time! Anyway, enough rant. I've now got my very own hanger space at Delta Heritage Airpark, CAK3, in Delta, BC, Canada. http://www.deltaheritageairpark.org/ I'm getting closer and closer to the frame inspection. I need a 72" tach cable and two 90 fittings. I'm saving up for that. When the weather gets better I'll be doing the fuel system leak test and fuel flow test. Also compass swinging. There's some nuts and bolt stuff to take care of. OH! and the engine cowling to design and make. 90% done 90% to go! And then there's the prop to make!! These pics are in the temporary space. My new permanent space is three spaces right, at the very end of the hanger. Clif Fill what's empty, empty what's full, fart joyously, carry matches. > > > Hi Kip > Ive been a member of this forum for a couple of years. I like the people > and the format...so much amazing information > My partner set me up with Brodhead Pietenpol Association. Same great > people plus a bunch more , all the information you find here,plus,once > again, a bunch more. If you havent already, you might want to check it > out. Thats something you can do without giving mr zuckerberg your data > Blue skies! ________________________________ Message 2 _____________________________________ Time: 06:32:38 AM PST US Subject: Pietenpol-List: Re: Pietenpol-List Digest: 4 Msgs - 02/11/19 From: dndboyd2@gmail.com I much prefer the Matronics format for good technical information on building. Also good for announcing events. Too many distractions on FB. Sent from my iPhone > On Feb 12, 2019, at 1:39 AM, Pietenpol-List Digest Server wrote: > > * > > ================================================= > Online Versions of Today's List Digest Archive > ================================================= > > Today's complete Pietenpol-List Digest can also be found in either of the > two Web Links listed below. The .html file includes the Digest formatted > in HTML for viewing with a web browser and features Hyperlinked Indexes > and Message Navigation. The .txt file includes the plain ASCII version > of the Pietenpol-List Digest and can be viewed with a generic text editor > such as Notepad or with a web browser. > > HTML Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 19-02-11&Archive=Pietenpol > > Text Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 19-02-11&Archive=Pietenpol > > > =============================================== > EMail Version of Today's List Digest Archive > =============================================== > > > ---------------------------------------------------------- > Pietenpol-List Digest Archive > --- > Total Messages Posted Mon 02/11/19: 4 > ---------------------------------------------------------- > > > Today's Message Index: > ---------------------- > > 1. 05:45 PM - Re: Ragwing Ultra-Piet (cdlwingnut) > 2. 06:47 PM - Re: Re: Ragwing Ultra-Piet (Kip Gardner) > 3. 07:22 PM - Re: Ragwing Ultra-Piet (cdlwingnut) > 4. 07:36 PM - Re: Re: Ragwing Ultra-Piet (Glen Schweizer) > > > > ________________________________ Message 1 _____________________________________ > > > Time: 05:45:54 PM PST US > Subject: Pietenpol-List: Re: Ragwing Ultra-Piet > From: "cdlwingnut" > > > still working on the left wing. The trailing edge is installed and i figured out > how i want to do the wing tips, the plans are a little vague on this part so > after some though this is what i came up with > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=487540#487540 > > > Attachments: > > http://forums.matronics.com//files/20190211_121719_resized_180.jpg > http://forums.matronics.com//files/20190211_121816_resized_514.jpg > http://forums.matronics.com//files/20190211_121828_resized_972.jpg > > > ________________________________ Message 2 _____________________________________ > > > Time: 06:47:01 PM PST US > Subject: Re: Pietenpol-List: Re: Ragwing Ultra-Piet > From: Kip Gardner > > > Looking good, > > I hope to start on one of these in a year or so, Ive enjoyed seeing your progress. > I wish there were still more people using this forum, i think the format > is more conducive to real info exchange than Facebook. > > Kip Gardner > >> On Feb 11, 2019, at 8:45 PM, cdlwingnut wrote: >> >> >> still working on the left wing. The trailing edge is installed and i figured > out how i want to do the wing tips, the plans are a little vague on this part > so after some though this is what i came up with >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=487540#487540 >> >> >> >> >> Attachments: >> >> http://forums.matronics.com//files/20190211_121719_resized_180.jpg >> http://forums.matronics.com//files/20190211_121816_resized_514.jpg >> http://forums.matronics.com//files/20190211_121828_resized_972.jpg >> >> >> >> >> >> > > > ________________________________ Message 3 _____________________________________ > > > Time: 07:22:36 PM PST US > Subject: Pietenpol-List: Re: Ragwing Ultra-Piet > From: "cdlwingnut" > > > thanks Kip > I do like this format for showing build progress, I would love so see others who > are building use it too. It is fun watching a bunch of sticks and some plywood > slowly turn into an airplane. > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=487542#487542 > > > ________________________________ Message 4 _____________________________________ > > > Time: 07:36:27 PM PST US > From: Glen Schweizer > Subject: Re: Pietenpol-List: Re: Ragwing Ultra-Piet > > > Hi Kip > Ive been a member of this forum for a couple of years. I like the people and the > format...so much amazing information > My partner set me up with Brodhead Pietenpol Association. Same great people plus > a bunch more , all the information you find here,plus,once again, a bunch more. > If you havent already, you might want to check it out. Thats something you > can do without giving mr zuckerberg your data Blue skies! > >> On Feb 11, 2019, at 6:46 PM, Kip Gardner wrote: >> >> >> Looking good, >> >> I hope to start on one of these in a year or so, Ive enjoyed seeing your progress. > I wish there were still more people using this forum, i think the format > is more conducive to real info exchange than Facebook. >> >> Kip Gardner >> >>> On Feb 11, 2019, at 8:45 PM, cdlwingnut wrote: >>> >>> >>> still working on the left wing. The trailing edge is installed and i figured > out how i want to do the wing tips, the plans are a little vague on this part > so after some though this is what i came up with >>> >>> >>> >>> >>> Read this topic online here: >>> >>> http://forums.matronics.com/viewtopic.php?p=487540#487540 >>> >>> >>> >>> >>> Attachments: >>> >>> http://forums.matronics.com//files/20190211_121719_resized_180.jpg >>> http://forums.matronics.com//files/20190211_121816_resized_514.jpg >>> http://forums.matronics.com//files/20190211_121828_resized_972.jpg >>> >>> >>> >>> >>> >>> >> >> >> >> >> > > > > > > > > ________________________________ Message 3 _____________________________________ Time: 06:32:39 AM PST US Subject: Pietenpol-List: Re: Pietenpol-List Digest: 4 Msgs - 02/11/19 From: dndboyd2@gmail.com I much prefer the Matronics format for good technical information on building. Also good for announcing events. Too many distractions on FB. Sent from my iPhone > On Feb 12, 2019, at 1:39 AM, Pietenpol-List Digest Server wrote: > > * > > ================================================= > Online Versions of Today's List Digest Archive > ================================================= > > Today's complete Pietenpol-List Digest can also be found in either of the > two Web Links listed below. The .html file includes the Digest formatted > in HTML for viewing with a web browser and features Hyperlinked Indexes > and Message Navigation. The .txt file includes the plain ASCII version > of the Pietenpol-List Digest and can be viewed with a generic text editor > such as Notepad or with a web browser. > > HTML Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 19-02-11&Archive=Pietenpol > > Text Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 19-02-11&Archive=Pietenpol > > > =============================================== > EMail Version of Today's List Digest Archive > =============================================== > > > ---------------------------------------------------------- > Pietenpol-List Digest Archive > --- > Total Messages Posted Mon 02/11/19: 4 > ---------------------------------------------------------- > > > Today's Message Index: > ---------------------- > > 1. 05:45 PM - Re: Ragwing Ultra-Piet (cdlwingnut) > 2. 06:47 PM - Re: Re: Ragwing Ultra-Piet (Kip Gardner) > 3. 07:22 PM - Re: Ragwing Ultra-Piet (cdlwingnut) > 4. 07:36 PM - Re: Re: Ragwing Ultra-Piet (Glen Schweizer) > > > > ________________________________ Message 1 _____________________________________ > > > Time: 05:45:54 PM PST US > Subject: Pietenpol-List: Re: Ragwing Ultra-Piet > From: "cdlwingnut" > > > still working on the left wing. The trailing edge is installed and i figured out > how i want to do the wing tips, the plans are a little vague on this part so > after some though this is what i came up with > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=487540#487540 > > > Attachments: > > http://forums.matronics.com//files/20190211_121719_resized_180.jpg > http://forums.matronics.com//files/20190211_121816_resized_514.jpg > http://forums.matronics.com//files/20190211_121828_resized_972.jpg > > > ________________________________ Message 2 _____________________________________ > > > Time: 06:47:01 PM PST US > Subject: Re: Pietenpol-List: Re: Ragwing Ultra-Piet > From: Kip Gardner > > > Looking good, > > I hope to start on one of these in a year or so, Ive enjoyed seeing your progress. > I wish there were still more people using this forum, i think the format > is more conducive to real info exchange than Facebook. > > Kip Gardner > >> On Feb 11, 2019, at 8:45 PM, cdlwingnut wrote: >> >> >> still working on the left wing. The trailing edge is installed and i figured > out how i want to do the wing tips, the plans are a little vague on this part > so after some though this is what i came up with >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=487540#487540 >> >> >> >> >> Attachments: >> >> http://forums.matronics.com//files/20190211_121719_resized_180.jpg >> http://forums.matronics.com//files/20190211_121816_resized_514.jpg >> http://forums.matronics.com//files/20190211_121828_resized_972.jpg >> >> >> >> >> >> > > > ________________________________ Message 3 _____________________________________ > > > Time: 07:22:36 PM PST US > Subject: Pietenpol-List: Re: Ragwing Ultra-Piet > From: "cdlwingnut" > > > thanks Kip > I do like this format for showing build progress, I would love so see others who > are building use it too. It is fun watching a bunch of sticks and some plywood > slowly turn into an airplane. > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=487542#487542 > > > ________________________________ Message 4 _____________________________________ > > > Time: 07:36:27 PM PST US > From: Glen Schweizer > Subject: Re: Pietenpol-List: Re: Ragwing Ultra-Piet > > > Hi Kip > Ive been a member of this forum for a couple of years. I like the people and the > format...so much amazing information > My partner set me up with Brodhead Pietenpol Association. Same great people plus > a bunch more , all the information you find here,plus,once again, a bunch more. > If you havent already, you might want to check it out. Thats something you > can do without giving mr zuckerberg your data Blue skies! > >> On Feb 11, 2019, at 6:46 PM, Kip Gardner wrote: >> >> >> Looking good, >> >> I hope to start on one of these in a year or so, Ive enjoyed seeing your progress. > I wish there were still more people using this forum, i think the format > is more conducive to real info exchange than Facebook. >> >> Kip Gardner >> >>> On Feb 11, 2019, at 8:45 PM, cdlwingnut wrote: >>> >>> >>> still working on the left wing. The trailing edge is installed and i figured > out how i want to do the wing tips, the plans are a little vague on this part > so after some though this is what i came up with >>> >>> >>> >>> >>> Read this topic online here: >>> >>> http://forums.matronics.com/viewtopic.php?p=487540#487540 >>> >>> >>> >>> >>> Attachments: >>> >>> http://forums.matronics.com//files/20190211_121719_resized_180.jpg >>> http://forums.matronics.com//files/20190211_121816_resized_514.jpg >>> http://forums.matronics.com//files/20190211_121828_resized_972.jpg >>> >>> >>> >>> >>> >>> >> >> >> >> >> > > > > > > > > ________________________________ Message 4 _____________________________________ Time: 08:14:55 AM PST US Subject: Pietenpol-List: Re: Ragwing Ultra-Piet From: "taildrags" Clif; after dealing with an awkwardly-routed tach cable on my airplane, I sprung for one of those 90 degree cable adapters from Aircraft Spruce. About $70 USD, works great. -------- Oscar Zuniga Medford, OR Air Camper NX41CC "Scout" A75 power, 72x36 Culver prop Read this topic online here: http://forums.matronics.com/viewtopic.php?p=487556#487556 ________________________________ Message 5 _____________________________________ Time: 11:33:01 PM PST US From: "Clif Dawson" Subject: Re: Pietenpol-List: Re: Ragwing Ultra-Piet Yeah, that's what I'm aiming for. They seeem to be the only ones with the 72" cable I need as well. I'm saving up my sheckles. Or yuans. :-) Clif Life is uncertain. Eat dessert first. > > Clif; after dealing with an awkwardly-routed tach cable on my airplane, I > sprung for one of those 90 degree cable adapters from Aircraft Spruce. > About $70 USD, works great. > > -------- > Oscar Zuniga ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.