---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Thu 04/04/19: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:50 AM - Re: Re: Brodhead anyone? (skipgadd@earthlink.net) 2. 04:22 PM - Re: Ragwing Ultra-Piet (cdlwingnut) 3. 05:22 PM - Re: Brodhead anyone? (cdlwingnut) 4. 06:58 PM - Re: Re: Ragwing Ultra-Piet (Glen Schweizer) 5. 08:44 PM - Re: Re: Ragwing Ultra-Piet (Clif Dawson) 6. 08:58 PM - Re: Re: Ragwing Ultra-Piet (Glen Schweizer) ________________________________ Message 1 _____________________________________ Time: 05:50:26 AM PST US From: "skipgadd@earthlink.net" Subject: Re: Pietenpol-List: Re: Brodhead anyone? In addition to what Oscar said, you also have an auto pilot ;) Skip -----Original Message----- >From: taildrags >Sent: Apr 3, 2019 11:19 PM >To: pietenpol-list@matronics.com >Subject: Pietenpol-List: Re: Brodhead anyone? > > >I don't think Piet pilots realize what a sweet deal this could be. With a motorhome traveling along with you at pretty much the same pace, you can have a ground support crew, airport shuttle, first-aid station, and home-cooked hot grilled cheese sandwiches at every fuel stop ;o) Not only that, but with Glen in the front cockpit, you have another set of eyes as well as a navigator- all at no extra charge! > >-------- >Oscar Zuniga >Medford, OR >Air Camper NX41CC "Scout" >A75 power, 72x36 Culver prop > > >Read this topic online here: > >http://forums.matronics.com/viewtopic.php?p=488504#488504 > > ________________________________ Message 2 _____________________________________ Time: 04:22:27 PM PST US Subject: Pietenpol-List: Re: Ragwing Ultra-Piet From: "cdlwingnut" made a few airplane parts this week. I got the part to slide over my axle to keep my wheels from sliding in made and the brakes will attach to them. I am hoping the bungees will be enough to keep it from rotating with the wheel one the brakes are applied. I also got some more done on the wing. Now it is ready to be flipped over so the plywood trim gusset can be put on the bottom. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=488530#488530 Attachments: http://forums.matronics.com//files/20190404_132649_resized_147.jpg http://forums.matronics.com//files/20190404_132738_resized_163.jpg ________________________________ Message 3 _____________________________________ Time: 05:22:20 PM PST US Subject: Pietenpol-List: Re: Brodhead anyone? From: "cdlwingnut" I'm in the same boat as Glen. My piet won't be ready, but if things work out I may make it up to Brodhead in a 1930 Ford Model A. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=488531#488531 ________________________________ Message 4 _____________________________________ Time: 06:58:11 PM PST US From: Glen Schweizer Subject: Re: Pietenpol-List: Re: Ragwing Ultra-Piet You will need some sort of attachment like a trailing arm to attach firmly to your backing plate and then pivot on gear leg to keep your axle from spinning when brake is applied. Good luck. Sounds like a great build so far > On Apr 4, 2019, at 4:21 PM, cdlwingnut wrote: > > > made a few airplane parts this week. I got the part to slide over my axle to keep my wheels from sliding in made and the brakes will attach to them. I am hoping the bungees will be enough to keep it from rotating with the wheel one the brakes are applied. I also got some more done on the wing. Now it is ready to be flipped over so the plywood trim gusset can be put on the bottom. > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=488530#488530 > > > > > Attachments: > > http://forums.matronics.com//files/20190404_132649_resized_147.jpg > http://forums.matronics.com//files/20190404_132738_resized_163.jpg > > > > > > ________________________________ Message 5 _____________________________________ Time: 08:44:29 PM PST US From: "Clif Dawson" Subject: Re: Pietenpol-List: Re: Ragwing Ultra-Piet There have been a number of us who have not welded stuff to our axles. These pics show how my brake assy is kept from rotating while compensating for the rise and fall of the axle. I got the idea from someone else but can't find the pic. In that case it was a cable holding the assy. Clif Heaven goes by favour. If it went by merit, you would stay out and your dog would go in > > You will need some sort of attachment like a trailing arm to attach firmly > to your backing plate and then pivot on gear leg to keep your axle from > spinning when brake is applied. Good luck. Sounds like a great build so > far >> made a few airplane parts this week. I got the part to slide over my axle >> to keep my wheels from sliding in made and the brakes will attach to >> them. ________________________________ Message 6 _____________________________________ Time: 08:58:13 PM PST US From: Glen Schweizer Subject: Re: Pietenpol-List: Re: Ragwing Ultra-Piet Perfect! > On Apr 4, 2019, at 8:43 PM, Clif Dawson wrote: > > There have been a number of us who have not welded stuff to > our axles. These pics show how my brake assy is kept from > rotating while compensating for the rise and fall of the axle. > I got the idea from someone else but can't find the pic. In > that case it was a cable holding the assy. > > Clif > Heaven goes by favour. If it went by merit, > you would stay out and your dog would go in > > > > >> You will need some sort of attachment like a trailing arm to attach firmly to your backing plate and then pivot on gear leg to keep your axle from spinning when brake is applied. Good luck. Sounds like a great build so far > >>> made a few airplane parts this week. I got the part to slide over my axle to keep my wheels from sliding in made and the brakes will attach to them. > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.