---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Sat 11/02/19: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:04 PM - Re: Cut-out for torque tube-and strut question (echobravo4) 2. 02:18 PM - Re: Re: Cut-out for torque tube-and strut question (Jack Textor) 3. 02:49 PM - Re: Cut-out for torque tube-and strut question (echobravo4) 4. 03:59 PM - Re: Re: Cut-out for torque tube-and strut question (Jack Textor) 5. 06:26 PM - Re: Cut-out for torque tube-and strut question (Pocono John) 6. 08:10 PM - Re: Cut-out for torque tube-and strut question (taildrags) ________________________________ Message 1 _____________________________________ Time: 12:04:52 PM PST US Subject: Pietenpol-List: Re: Cut-out for torque tube-and strut question From: "echobravo4" Hi John This is a picture of mine before i cleaned up the glue- the hole is about 4.75" wide by 5" high and everything fits fine. I did move the connecting rod to the other side of the sticks. that way (flying right handed) my hand will hit my thigh before the connecting rod will hit the side of the cutout. And yes, add a block to the front for the front cabane fittings. -------- Earl Brown I may not have gone where I intended to go, but I think I have ended up where I intended to be. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=492236#492236 Attachments: http://forums.matronics.com//files/img_0116_104.jpg http://forums.matronics.com//files/img_2442_867.jpg ________________________________ Message 2 _____________________________________ Time: 02:18:23 PM PST US From: Jack Textor Subject: Re: Pietenpol-List: Re: Cut-out for torque tube-and strut question Earl is that a mail bag on the engine mount? Jack Textor Sent from my iPad > On Nov 2, 2019, at 2:04 PM, echobravo4 wrote: > > > Hi John > > This is a picture of mine before i cleaned up the glue- > the hole is about 4.75" wide by 5" high and everything fits fine. > I did move the connecting rod to the other side of the sticks. > that way (flying right handed) my hand will hit my thigh before the > connecting rod will hit the side of the cutout. > > And yes, add a block to the front for the front cabane fittings. > > -------- > Earl Brown > > I may not have gone where I intended to go, but I think I have ended up where I intended to be. > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=492236#492236 > > > > > Attachments: > > http://forums.matronics.com//files/img_0116_104.jpg > http://forums.matronics.com//files/img_2442_867.jpg > > > > > > ________________________________ Message 3 _____________________________________ Time: 02:49:22 PM PST US Subject: Pietenpol-List: Re: Cut-out for torque tube-and strut question From: "echobravo4" Haha! yea, I'm converting the front cockpit to a mail bin! it's a leather shop apron -------- Earl Brown I may not have gone where I intended to go, but I think I have ended up where I intended to be. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=492238#492238 ________________________________ Message 4 _____________________________________ Time: 03:59:50 PM PST US From: Jack Textor Subject: Re: Pietenpol-List: Re: Cut-out for torque tube-and strut question A beaut! Jack Textor Sent from my iPad > On Nov 2, 2019, at 4:49 PM, echobravo4 wrote: > > > Haha! yea, I'm converting the front cockpit to a mail bin! > it's a leather shop apron > > -------- > Earl Brown > > I may not have gone where I intended to go, but I think I have ended up where I intended to be. > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=492238#492238 > > > > > > > > > ________________________________ Message 5 _____________________________________ Time: 06:26:16 PM PST US Subject: Pietenpol-List: Re: Cut-out for torque tube-and strut question From: "Pocono John" Thanks Earl! -------- John Cronin Read this topic online here: http://forums.matronics.com/viewtopic.php?p=492241#492241 ________________________________ Message 6 _____________________________________ Time: 08:10:42 PM PST US Subject: Pietenpol-List: Re: Cut-out for torque tube-and strut question From: "taildrags" Really nice woodwork on the seat framing. I like the gussets (hidden) on the underside of the front seat framing, but the radiused arches forming the top of the fuselage are really nice. -------- Oscar Zuniga Medford, OR Air Camper NX41CC "Scout" A75 power, 72x36 Culver prop Read this topic online here: http://forums.matronics.com/viewtopic.php?p=492242#492242 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.