---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Mon 11/25/19: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 0. 11:09 AM - Make Sure You're Listed! (Matt Dralle) 1. 06:11 AM - Re: throttle setup (Semih Oksay) 2. 07:36 AM - Performance (Bruce Kirk) 3. 11:14 AM - Re: throttle setup (tsts4) ________________________________ Message 0 _____________________________________ Time: 11:09:56 AM PST US From: Matt Dralle Subject: Pietenpol-List: Make Sure You're Listed! Dear Listers, The List of Contributors (LOC) is just around the corner with just few more days in this year's Fund Raiser! Later in December I will post a list of everyone that so generously made a Contribution to support the Lists this year. Its my way of publicly thanking everyone that took a minute to show their appreciation for the Lists. Won't you take minute and assure that your name is on the upcoming LOC? Tell others that you appreciate the Lists. Making a Contribution to support the Lists is fast and easy using your Visa, MasterCard, or Paypal account: http://www.matronics.com/contribution Or, by dropping a personal check in the mail to: Matt Dralle / Matronics 581 Jeannie Way Livermore CA 94550 I would like to thank everyone that has so generously made a Contribution thus far during this year's List Fund Raiser! Remember that its YOUR support that keeps these Lists running and improving! Thank you! Matt Dralle Matronics Email List Administrator ________________________________ Message 1 _____________________________________ Time: 06:11:21 AM PST US From: Semih Oksay Subject: Re: Pietenpol-List: throttle setup Hi Oscar I made my throttle levers as in the picture. Front and rear are identical, connected with solid rod. A bowden cable, actually marine throttle or gearshift linkage, runs from the rear lever to the carb, inside wall of the cockpits. The size of the bowden is the same as the piper's, but since it is marine, it is all in stainless steel. Cheers Semih Oksay, Istanbul, Turkey (Now in Orlando,Fl) On Sun, Nov 24, 2019 at 2:42 PM taildrags wrote: > > G'day, Pietenpolers; > > In an effort to get a Piet thread bumped to the top of the topics list > instead of the annual list support threads (I already made my annual > contribution to Matronics, thank you Matt), I'm throwing out a general > question about throttle setups. I don't like the setup on my airplane and > am going to start from scratch. To describe what I have, it's a Bowden > cable running from the rear cockpit to the carb. In the front cockpit, a > wooden sewing thread bobbin with the edges rounded off has been slipped > over the center wire with bug nuts clamping each side of it to the center > wire to let the front cockpit occupant slide it back and forth to work the > throttle. The setup looks pretty cheesy, but since it's tucked in pretty > tight under the top edge of the cockpit, I've never had a passenger snag it > or bump it while getting in or out. Other than that, not much else good > about it. > > In the rear cockpit, a simple flat aluminum lever with the pivot point at > the bottom and a round knob up near the top coaming works the throttle. > It's pretty cheesy too, but what I like is that I can rest my left hand on > the coaming and use my fingertips to work the throttle. It's very stable > and easy to make small changes in engine power that way, especially on a > bumpy afternoon. Since the knob is up near the coaming rather than down > further, I can also reach in and work the throttle very easily from outside > the cockpit while prop-starting. It also has enough friction and drag in > the cables and lever where I can set throttle in cruise and rarely have it > back off or creep off of the RPM that I want. > > So what I'm looking for are pix or ideas on how you set up your > throttle(s). I've looked through some of the setups in Westcoastpiet. > I've already decided to link the front and rear throttles with a rod rather > than with the Bowden cable, but other than that, I'm open to ideas. The > builder routed the throttle cable inside the cockpit, not outside between > the plywood and fabric, so I can get to all of it if I choose to. Thanks. > > Oscar Zuniga > Medford, OR > > -------- > Oscar Zuniga > Medford, OR > Air Camper NX41CC "Scout" > A75 power, 72x36 Culver prop > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=493401#493401 > > -- Semih Oksay ________________________________ Message 2 _____________________________________ Time: 07:36:03 AM PST US From: Bruce Kirk Subject: Pietenpol-List: Performance Hi everyone I have a question about the performance of a pietenpol operating at airports at airports at an elevation of 3000 plus feet with an A65 engine. Sent from my iPhone ________________________________ Message 3 _____________________________________ Time: 11:14:59 AM PST US Subject: Pietenpol-List: Re: throttle setup From: "tsts4" Semih, was there a particular reason you ran your Bowden cable from the rear throttle lever instead of the front lever? -------- Todd Stovall aka "Auburntsts" on EAA and VAF RV-10 N728TT -- Flying Read this topic online here: http://forums.matronics.com/viewtopic.php?p=493464#493464 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.