---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Mon 12/02/19: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:12 PM - Re: Re: throttle setup (Gerrit-Jan Kaal) 2. 04:25 PM - Re: Re: throttle setup (Semih Oksay) ________________________________ Message 1 _____________________________________ Time: 12:12:02 PM PST US From: Gerrit-Jan Kaal Subject: Re: Pietenpol-List: Re: throttle setup Nice! Once you know, what you're looking for, things get simpler. Never thought about searching for MIG Liner: https://nl.aliexpress.com/item/32719611456.html?spm=a2g0z.12010612.814835 6.23.7f4b4ac0uqMDw2 Ordered 2 sets of 4m (12ft) for =82=AC12,50 ... On Sun, 1 Dec 2019 at 03:19, tkreiner wrote: > > Oscar, > > Like you, I=99m planning on a rod linking the front and rear thrott le > handles together, with a Bowden cable to the carb. > > Speaking of Bowden cables, I made a nice find that I=99d like to s hare with > all. I came across a Bernard MIG Liner, thru which MIG welding wire is f ed > by the welder. > > I picked up a 15=99 long liner locally for $10. Not bad considerin g that > ACS is getting over $2.00 per foot. This is a Bowden cable that accepts > 1/16 SS wire, rather than the .078 wire. Maybe the best part about it is > that it is roughly half the weight of the ACS cable. > > This Bowden cable will accept either 1/16 (.062) or 1.5mm SS wire. After > an exhaustive search, I found 1.5mm SS half hard wire on eBay for roughly > $6.75 for 5 meters. > > I=99m planning to use this for throttle, mixture, and carb heat. > > -------- > Tom Kreiner > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=493692#493692 > > =========== =========== =========== =========== =========== =========== > > ________________________________ Message 2 _____________________________________ Time: 04:25:48 PM PST US From: Semih Oksay Subject: Re: Pietenpol-List: Re: throttle setup I have played with MIG for 25 years and never thought of using the liner as throttle cable. The marine throttle cables for especially outboard motors are the same dimension with the Piper throttle cables, almost any length. More durable and reliable I think. Their ends are just the same as Piper throttle cables. my 2 cents Semih Oksay, building in Istanbul, Turkey, now in Orlando,Fl On Mon, Dec 2, 2019 at 3:18 PM Gerrit-Jan Kaal wrote: > Nice! Once you know, what you're looking for, things get simpler. Never > thought about searching for MIG Liner: > > > https://nl.aliexpress.com/item/32719611456.html?spm=a2g0z.12010612.8148 356.23.7f4b4ac0uqMDw2 > > Ordered 2 sets of 4m (12ft) for =82=AC12,50 ... > > > On Sun, 1 Dec 2019 at 03:19, tkreiner wrote: > >> >> Oscar, >> >> Like you, I=99m planning on a rod linking the front and rear throt tle >> handles together, with a Bowden cable to the carb. >> >> Speaking of Bowden cables, I made a nice find that I=99d like to share >> with all. I came across a Bernard MIG Liner, thru which MIG welding wir e >> is fed by the welder. >> >> I picked up a 15=99 long liner locally for $10. Not bad consideri ng that >> ACS is getting over $2.00 per foot. This is a Bowden cable that accepts >> 1/16 SS wire, rather than the .078 wire. Maybe the best part about it i s >> that it is roughly half the weight of the ACS cable. >> >> This Bowden cable will accept either 1/16 (.062) or 1.5mm SS wire. Afte r >> an exhaustive search, I found 1.5mm SS half hard wire on eBay for roughl y >> $6.75 for 5 meters. >> >> I=99m planning to use this for throttle, mixture, and carb heat. >> >> -------- >> Tom Kreiner >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=493692#493692 >> >> >> >> >> >> >> ========== >> br> fts!) >> r> > rel="noreferrer" target="_blank"> >> http://www.matronics.com/contribution >> -Matt Dralle, List Admin. >> ========== >> br> enpol-List" rel="noreferrer" target="_blank"> >> http://www.matronics.com/Navigator?Pietenpol-List >> ========== >> FORUMS - >> eferrer" target="_blank">http://forums.matronics.com >> ========== >> WIKI - >> errer" target="_blank">http://wiki.matronics.com >> ========== >> b Site - >> -Matt Dralle, List Admin. >> rel="noreferrer" target="_blank">http://www.matronics.com/contributi on >> ========== >> >> >> >> -- Semih Oksay ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.