----------------------------------------------------------
                           Piper-List Digest Archive
                                      ---
                     Total Messages Posted Fri 07/28/06: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 12:47 PM - PA16 Trim  (Bill Metz)
     2. 01:40 PM - Re: PA16 Trim  (Ed Hash)
 
 
 
________________________________  Message 1  _____________________________________


Time: 12:47:59 PM PST US
From: "Bill Metz" <wwmetz@earthlink.net>
Subject: Piper-List: PA16 Trim

Any one out there have knowledge of how the trim cable should be in the 
PA-16.   Mine is slipping and I have been told that it should wrap the 
small pulley in the cockpit 1 and one half times.   The cable is not 
long enough for this.   It slips at the handle 
Bill Metz

________________________________  Message 2  _____________________________________


Time: 01:40:23 PM PST US
From: Ed Hash <aired@frontiernet.net>
Subject: Re: Piper-List: PA16 Trim

I have a Clipper but I don't know the answer for you. Have you tried  
the Short Wing Piper Club (SWPC)? www.shortwing.org

They have a mailing list and a forum. The mailing list gets more  
traffic and you should be able to get an answer there same day.

Ed

On Jul 28, 2006, at 12:46 PM, Bill Metz wrote:

> Any one out there have knowledge of how the trim cable should be in  
> the PA-16.   Mine is slipping and I have been told that it should  
> wrap the small pulley in the cockpit 1 and one half times.   The  
> cable is not long enough for this.   It slips at the handle
> Bill Metz
>