----------------------------------------------------------
                           Piper-List Digest Archive
                                      ---
                     Total Messages Posted Sat 07/29/06: 4
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 11:00 AM - Question about Cherokee Glare Shield on Ebay  (GDISKELLY@aol.com)
     2. 05:56 PM - Re: Question about Cherokee Glare Shield on Ebay  (Ron Bell)
     3. 05:59 PM - Re: Question about Cherokee Glare Shield on Ebay  (GDISKELLY@aol.com)
     4. 06:27 PM - Re: Question about Cherokee Glare Shield on Ebay  (jrc)
 
 
 
________________________________  Message 1  _____________________________________


Time: 11:00:09 AM PST US
From: GDISKELLY@aol.com
Subject: Piper-List: Question about Cherokee Glare Shield on Ebay

There is a Dennis Ashby glare shield cover listed on ebay this week. Has 
anyone had any experience installing these things? How long of a project was it?

Was windshield removal necessary. 
This also comes with the optional lights. Any experiences with those would be 
greatly appreciated.
Thanks in advance for your welcomed experiences and comments. 
DO NOT ARCHIVE

________________________________  Message 2  _____________________________________


Time: 05:56:24 PM PST US
From: "Ron Bell" <rbell@hpavet.com>
Subject: RE: Piper-List: Question about Cherokee Glare Shield on Ebay

Haven't heard anything bad about them.  You don't remove the windshield 
to
install.  It does require trimming, and once fitted, is simply held in 
place
with doublestick tape.  Since it's not permanently installed, it doesn't
require a 337.  The lights will require your friendly A&P to sign off 
for
the install and 337.  Give yourself the best part of a day to finish the
glareshield.  Check out http://www.aircraftglareshield.com/  and you'll 
find
a bunch of info about it.  Good luck with it.

Ron B. 

-----Original Message-----
[mailto:owner-piper-list-server@matronics.com] On Behalf Of
GDISKELLY@aol.com
Sent: Saturday, July 29, 2006 1:59 PM


There is a Dennis Ashby glare shield cover listed on ebay this week. Has
anyone had any experience installing these things? How long of a project 
was
it? Was windshield removal necessary. 
This also comes with the optional lights. Any experiences with those 
would
be greatly appreciated.
Thanks in advance for your welcomed experiences and comments. 
DO NOT ARCHIVE


________________________________  Message 3  _____________________________________


Time: 05:59:00 PM PST US
From: GDISKELLY@aol.com
Subject: Re: Piper-List: Question about Cherokee Glare Shield on Ebay

Thanks Ron.  

________________________________  Message 4  _____________________________________


Time: 06:27:16 PM PST US
From: "jrc" <jrccea@bellsouth.net>
Subject: Re: Piper-List: Question about Cherokee Glare Shield on Ebay

MessageI put an Ashby glareshield in a Cherokee 150C while installing a 
one-piece windshield.  It can be installed without removing the 
windshield, but removal and reinstallation of the defroster outlets is 
far more difficult with the windshield in place.  The machine screws 
that hold the ducts in place penetrate the glare shield, and getting the 
holes in the right place is more difficult with the windshield 
installed.  It works fine, but I haven't ever been able to keep the 
optional eyebrow lights permanently installed -- the adhesive fails in 
hot weather, and they fall down in front of the instruments.  Plan on a 
day for the installation.
  ----- Original Message ----- 
  From: Ron Bell 
  To: piper-list@matronics.com 
  Sent: Saturday, July 29, 2006 7:52 PM
  Subject: RE: Piper-List: Question about Cherokee Glare Shield on Ebay


  Haven't heard anything bad about them.  You don't remove the 
windshield to install.  It does require trimming, and once fitted, is 
simply held in place with doublestick tape.  Since it's not permanently 
installed, it doesn't require a 337.  The lights will require your 
friendly A&P to sign off for the install and 337.  Give yourself the 
best part of a day to finish the glareshield.  Check out 
http://www.aircraftglareshield.com/  and you'll find a bunch of info 
about it.  Good luck with it.

  Ron B. 
    -----Original Message-----
    From: owner-piper-list-server@matronics.com 
[mailto:owner-piper-list-server@matronics.com] On Behalf Of 
GDISKELLY@aol.com
    Sent: Saturday, July 29, 2006 1:59 PM
    To: piper-list@matronics.com
    Subject: Piper-List: Question about Cherokee Glare Shield on Ebay


    There is a Dennis Ashby glare shield cover listed on ebay this week. 
Has anyone had any experience installing these things? How long of a 
project was it? Was windshield removal necessary. 
    This also comes with the optional lights. Any experiences with those 
would be greatly appreciated.
    Thanks in advance for your welcomed experiences and comments. 
    DO NOT ARCHIVE