---------------------------------------------------------- Pulsar-List Digest Archive --- Total Messages Posted Wed 09/14/11: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:33 AM - Re: Electric flaps (CYard52306@aol.com) 2. 10:35 AM - Re: Electric flaps (Alan Gill) 3. 08:00 PM - Re: Pulsar reunion (Tom Gibbons) ________________________________ Message 1 _____________________________________ Time: 12:33:00 AM PST US From: CYard52306@aol.com Subject: Re: Pulsar-List: Electric flaps In a message dated 13/09/2011 21:32:00 GMT Daylight Time, mortweaver@sbcglobal.net writes: Fergelli 2 In. linear actuator. Dave I am currently using a linear actuator but it is large heavy and cumbersome, do you have the model number and lb force rating, is the two inch stroke the best fit.I have enclosed a picture of miy fitting. Regards Cy G-PLSA 912 ________________________________ Message 2 _____________________________________ Time: 10:35:53 AM PST US From: Alan Gill Subject: Re: Pulsar-List: Electric flaps Thank you otto. Your build manual instruction would assist me.=0A-=0ARega rdfs ...> Alan=0A-=0A=0AFrom: otto souta =0ATo: pulsar-l ist@matronics.com=0ASent: Monday, 12 September 2011, 18:10=0ASubject: Re: P ulsar-List: Electric flaps=0A=0A=0AHi Alan,=0AI have electric flaps on my P ulsar III. I am away from the plane=0A now, but I can oblige with th e build manual instructions, if OK.=0APlease advise.=0Aregards=0Aotto=0A=0A =0A=0AOn 12/09/2011 17:56, Alan Gill wrote: =0AHi all again =0A>=0A>Have a person that has purchased a second hand Pulsar Series 1, 582 trigear. He wa nts to know if anyone has converted the flap control from hand operated-t o ELECTRIC flap. =0A>=0A>Any photo, diagram and material used would be very useful. =0A>=0A>Thanks again =0A>=0A>Alan Gill =0A>UK Pulsar Squadron Supp ===================== ________________________________ Message 3 _____________________________________ Time: 08:00:46 PM PST US From: "Tom Gibbons" Subject: Re: Pulsar-List: Pulsar reunion Hey Mr. Smith, I am sending my check to you tomorrow so I hope you are still going to be at the Topeka address by the time it gets to you! Call me before noon tomorrow if you think you are leaving before. Thanks man and look forward to seeing you and the gang! Tom ----- Original Message ----- From: GREGSMI@aol.com To: Pulsar-Aviators@yahoogroups.com ; pulsar-list@matronics.com Sent: Wednesday, July 13, 2011 5:53 PM Subject: Pulsar-List: Pulsar reunion Good evening friends. reservations are coming in at a good clip, so I am hoping for a large turn out this year. I know we are going to have several new Pulsars this year that were just finished, now we need to get the rest of you flyers in for the event. We do not want a poor showing for our English brothers. Alan Gill will be bringing lots of pictures and will talk about building and flying the Pulsar in the UK. That will be fun. Also, we have several builders that have volunteered to talk about building and flying. If you have some topics you would like covered, please let me know. Pam Drone has donated Paul's manuals, boxes of pictures, and some miscellaneous parts. I will have all of this available at the hotel. Included are some excellent pictures of the III engine mounting and gear. Also, Paul changed out his fiberglass gear to a Grove gear and I have pictures of that process. Ron Kovol has informed me the airport shuttle service I listed in the announcement is no longer serving Lawrence. If you are flying commercial into Kansas City you will have to use the Super Shuttle. Their phone number is 800-258-3826. Here is the announcement again. Please get your reservations in so we can plan meals. Thanks Greg Smith The Pulsar Pilots and Builders reunion will be held in Lawrence, KS., Sept. 22 =93 24. We will be meeting at the Holiday Inn Express, and the airport, KLWC. When making hotel reservations, mention you are with the Pulsar group to get a discount (rate $60 per night). Room reservations must be made by August 22. We will have several builder presentations and flying activities, and a chance to catch up with old friends and make new ones. If you fly commercial to Kansas City, the airport shuttle service is listed below. Please return bottom of card with check for $115/per person. For additional information, call Greg 210-639-5764 or email Gregsmi@aol.com. Sept. 22 Arrivals, Happy hour at hotel Holiday Inn Express 785-749-7555 Sept. 23 Seminars at hotel MCI Super Shuttle 800-258-3826 Sept. 24 Flying\ Demos at airport KLWC Return to: Banquet at hotel Greg Smith Sept. 25 Departures 4404 SE Gemstone Ln Topeka, KS. 66609 Please return by July 30, 2011 Name(s) _____________________________________________ Phone _____________ Address ________________________________________________ Number attending ___ Flying Pulsar Y/N N-Number ________ ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pulsar-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pulsar-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pulsar-list Browse Digests http://www.matronics.com/digest/pulsar-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.