---------------------------------------------------------- Pulsar-List Digest Archive --- Total Messages Posted Tue 09/27/11: 17 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:57 AM - Re: Parting out my Pulsar3 (otto souta) 2. 09:14 AM - Re: Parting out my Pulsar3 (Larry Wheat) 3. 12:22 PM - Re: Parting out my Pulsar3 (Max) 4. 12:33 PM - Re: Parting out my Pulsar3 (Max) 5. 12:47 PM - Parting out my Pulsae3 (Max) 6. 01:18 PM - Re: Parting out my Pulsae3 (otto souta) 7. 01:18 PM - Re: Parting out my Pulsar3 (mboesiger) 8. 01:31 PM - Re: Re: Parting out my Pulsar3 (otto souta) 9. 01:42 PM - Re: Parting out my Pulsae3 (Max) 10. 01:43 PM - Re: Re: Parting out my Pulsar3 (otto souta) 11. 01:55 PM - Re: Re: Parting out my Pulsar3 (George Gennuso) 12. 02:02 PM - Re: Re: Parting out my Pulsar3 (Max) 13. 02:17 PM - Re: Re: Parting out my Pulsar3 (Max) 14. 02:19 PM - Re: Re: Parting out my Pulsar3 (pilot623) 15. 02:48 PM - Re: Re: Parting out my Pulsar3 (Bernie's Mail) 16. 03:07 PM - Re: Re: Parting out my Pulsar3 (Bernie's Mail) 17. 04:19 PM - Re: Parting out my Pulsar3 (Larry Wheat) ________________________________ Message 1 _____________________________________ Time: 01:57:53 AM PST US From: otto souta Subject: Re: Pulsar-List: Parting out my Pulsar3 Hi Max, do you still have the Ivoprop hub and controls? Please advise. Regards Otto On 26/09/2011 20:09, Max wrote: > --> Pulsar-List message posted by: "Max" > > Pulsar Builders, > I am parting out my Pulsar3 purchased from Skystar Aviation in 1998. It > has a Rotax 914 (which has been sold), a night VFR panel complete, Cleveland > dual brake system, axles, wheels and tires, Whelen Nav lights and strobes, > and an in-flight adjustable Ivoprop hub and controls for a 2 or 3 blade > configuration. If you have interest in something, let me know, and I will > provide more specific Info. > > > Max Boesiger > Coldwell Banker > (208) 250-6234 > > ________________________________ Message 2 _____________________________________ Time: 09:14:42 AM PST US Subject: Re: Pulsar-List: Parting out my Pulsar3 From: Larry Wheat No, but thanks for the reply. If you can I would like to know what happened to your aircraft. Thanks, Larry On Mon, Sep 26, 2011 at 5:41 PM, Max wrote: > Larry,**** > > I'm afraid there isn't much left of the fuselage and wings. All was > damaged enough that they aren't worth the effort (and weight) to fix. I do > have the upper cowl piece. I have a complete panel that was designed and > assembled by Gulf Coast Avionics. Are you interested in any of that? **** > > ** ** > > Max Boesiger > > (208) 250-6234 **** > > *From:* owner-pulsar-list-server@matronics.com [mailto: > owner-pulsar-list-server@matronics.com] *On Behalf Of *Larry Wheat > *Sent:* Monday, September 26, 2011 2:45 PM > *To:* pulsar-list@matronics.com > *Subject:* Re: Pulsar-List: Parting out my Pulsar3**** > > ** ** > > Max: I am in the process of building a Pulsar III. What parts of the > fuselage and wings, wheel pants etc do you have. Was the airplane damaged? > To what extent. I am located in MOses Lake, Washington and was thinking > about spares. Thanks in advance. Cheers**** > > On Mon, Sep 26, 2011 at 12:09 PM, Max wrote:**** > > > Pulsar Builders, > I am parting out my Pulsar3 purchased from Skystar Aviation in 1998. It > has a Rotax 914 (which has been sold), a night VFR panel complete, > Cleveland > dual brake system, axles, wheels and tires, Whelen Nav lights and strobes, > and an in-flight adjustable Ivoprop hub and controls for a 2 or 3 blade > configuration. If you have interest in something, let me know, and I will > provide more specific Info. > > > Max Boesiger > Coldwell Banker > (208) 250-6234 > s.com/Navigator?Pulsar-List" > target="_blank">http://www.matronics.com/Navigator?Pulsar-List<%28208%29%20250-6234> > ronics.com/" target="_blank">http://forums.matronics.com > Matt Dralle, List Admin. > ==== > > > **** > > > -- > Larry Wheat**** > > * * > > * * > > ** > > ** > > ** > > ** > > ** > > *http://www.matronics.com/Navigator?Pulsar-List* > > ** > > ** > > *http://forums.matronics.com* > > ** > > ** > > ** > > ** > > *http://www.matronics.com/contribution* > > ** > > * * > > * > > * > > -- Larry Wheat ________________________________ Message 3 _____________________________________ Time: 12:22:33 PM PST US From: "Max" Subject: RE: Pulsar-List: Parting out my Pulsar3 Mine were getting pretty badly worn, so I threw them away. Max Boesiger Coldwell Banker (208) 250-6234 From: owner-pulsar-list-server@matronics.com [mailto:owner-pulsar-list-server@matronics.com] On Behalf Of Bill S Sent: Monday, September 26, 2011 6:59 PM Subject: Re: Pulsar-List: Parting out my Pulsar3 Max Do you have the four wing spar mounting bolts? Bill S . Pulsar lll Kit #17 ----- Original Message ----- From: Max Sent: Monday, September 26, 2011 7:41 PM Subject: RE: Pulsar-List: Parting out my Pulsar3 Larry, I'm afraid there isn't much left of the fuselage and wings. All was damaged enough that they aren't worth the effort (and weight) to fix. I do have the upper cowl piece. I have a complete panel that was designed and assembled by Gulf Coast Avionics. Are you interested in any of that? Max Boesiger (208) 250-6234 From: owner-pulsar-list-server@matronics.com [mailto:owner-pulsar-list-server@matronics.com] On Behalf Of Larry Wheat Sent: Monday, September 26, 2011 2:45 PM Subject: Re: Pulsar-List: Parting out my Pulsar3 Max: I am in the process of building a Pulsar III. What parts of the fuselage and wings, wheel pants etc do you have. Was the airplane damaged? To what extent. I am located in MOses Lake, Washington and was thinking about spares. Thanks in advance. Cheers On Mon, Sep 26, 2011 at 12:09 PM, Max wrote: Pulsar Builders, I am parting out my Pulsar3 purchased from Skystar Aviation in 1998. It has a Rotax 914 (which has been sold), a night VFR panel complete, Cleveland dual brake system, axles, wheels and tires, Whelen Nav lights and strobes, and an in-flight adjustable Ivoprop hub and controls for a 2 or 3 blade configuration. If you have interest in something, let me know, and I will provide more specific Info. Max Boesiger Coldwell Banker (208) 250-6234 s.com/Navigator?Pulsar-List" target="_blank">http://www.matronics.com/Navigator?Pulsar-List ronics.com/" target="_blank">http://forums.matronics.com Matt Dralle, List Admin. ==== -- Larry Wheat http://www.matronics.com/Navigator?Pulsar-List http://forums.matronics.com http://www.matronics.com/contribution href="http://www.matronics.com/Navigator?Pulsar-List">http://www.matronhref "http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c ________________________________ Message 4 _____________________________________ Time: 12:33:09 PM PST US From: "Max" Subject: RE: Pulsar-List: Parting out my Pulsar3 Larry, I had to make a night forced landing in a very remote part of Idaho. I had gone off course and didn't realize it until I was nearly out of fuel. I was unable to make it back to an airport. My Pulsar ran just fine untill it ran out of fuel. I was unhurt in the landing thanks to the "crash tolerant" design. Max Boesiger Coldwell Banker (208) 250-6234 From: owner-pulsar-list-server@matronics.com [mailto:owner-pulsar-list-server@matronics.com] On Behalf Of Larry Wheat Sent: Tuesday, September 27, 2011 10:13 AM Subject: Re: Pulsar-List: Parting out my Pulsar3 No, but thanks for the reply. If you can I would like to know what happened to your aircraft. Thanks, Larry On Mon, Sep 26, 2011 at 5:41 PM, Max wrote: Larry, I'm afraid there isn't much left of the fuselage and wings. All was damaged enough that they aren't worth the effort (and weight) to fix. I do have the upper cowl piece. I have a complete panel that was designed and assembled by Gulf Coast Avionics. Are you interested in any of that? Max Boesiger (208) 250-6234 From: owner-pulsar-list-server@matronics.com [mailto:owner-pulsar-list-server@matronics.com] On Behalf Of Larry Wheat Sent: Monday, September 26, 2011 2:45 PM Subject: Re: Pulsar-List: Parting out my Pulsar3 Max: I am in the process of building a Pulsar III. What parts of the fuselage and wings, wheel pants etc do you have. Was the airplane damaged? To what extent. I am located in MOses Lake, Washington and was thinking about spares. Thanks in advance. Cheers On Mon, Sep 26, 2011 at 12:09 PM, Max wrote: Pulsar Builders, I am parting out my Pulsar3 purchased from Skystar Aviation in 1998. It has a Rotax 914 (which has been sold), a night VFR panel complete, Cleveland dual brake system, axles, wheels and tires, Whelen Nav lights and strobes, and an in-flight adjustable Ivoprop hub and controls for a 2 or 3 blade configuration. If you have interest in something, let me know, and I will provide more specific Info. Max Boesiger Coldwell Banker (208) 250-6234 s.com/Navigator?Pulsar-List" target="_blank">http://www.matronics.com/Navigator?Pulsar-List ronics.com/" target="_blank">http://forums.matronics.com Matt Dralle, List Admin. ==== -- Larry Wheat http://www.matronics.com/Navigator?Pulsar-List http://forums.matronics.com http://www.matronics.com/contribution arget="_blank">http://www.matronics.com/Navigator?Pulsar-List ttp://forums.matronics.com _blank">http://www.matronics.com/contribution -- Larry Wheat ________________________________ Message 5 _____________________________________ Time: 12:47:48 PM PST US From: "Max" Subject: Pulsar-List: Parting out my Pulsae3 If you are interested in what I have for sale, please go to http://s1180.photobucket.com/albums/x402/mboesiger/ to see the pix and description of the components. If you need further description please email me. Max Boesiger Coldwell Banker (208) 250-6234 ________________________________ Message 6 _____________________________________ Time: 01:18:27 PM PST US From: otto souta Subject: Re: Pulsar-List: Parting out my Pulsae3 Hi Max, what a sad end. Shame. Great you are in one piece. The prop hub, is it Medium, or Magnum? How much do you want for it? thanks otto On 27/09/2011 20:47, Max wrote: > --> Pulsar-List message posted by: "Max" > > If you are interested in what I have for sale, please go to > http://s1180.photobucket.com/albums/x402/mboesiger/ > to see the pix and description of the components. If you need further > description please email me. > > > Max Boesiger > Coldwell Banker > (208) 250-6234 > > ________________________________ Message 7 _____________________________________ Time: 01:18:37 PM PST US Subject: Pulsar-List: Re: Parting out my Pulsar3 From: "mboesiger" I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link http://s1180.photobucket.com/albums/x402/mboesiger/ -------- I am parting out my pulsar3 purchased in 1998 from Skystar Aviation, Caldwell Idaho Read this topic online here: http://forums.matronics.com/viewtopic.php?p=353344#353344 ________________________________ Message 8 _____________________________________ Time: 01:31:12 PM PST US From: otto souta Subject: Re: Pulsar-List: Re: Parting out my Pulsar3 I have seen the picture of your prop hub, but I cannot tell what kind it is. I may be interested in the radiator also. thaks otto On 27/09/2011 21:18, mboesiger wrote: > --> Pulsar-List message posted by: "mboesiger" > > I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link > http://s1180.photobucket.com/albums/x402/mboesiger/ > > -------- > I am parting out my pulsar3 purchased in 1998 from Skystar Aviation, Caldwell Idaho > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=353344#353344 > > ________________________________ Message 9 _____________________________________ Time: 01:42:54 PM PST US From: "Max" Subject: RE: Pulsar-List: Parting out my Pulsae3 It is Magnum. Make me an offer I can't refuse! Max Boesiger Coldwell Banker (208) 250-6234 From: owner-pulsar-list-server@matronics.com [mailto:owner-pulsar-list-server@matronics.com] On Behalf Of otto souta Sent: Tuesday, September 27, 2011 2:18 PM Subject: Re: Pulsar-List: Parting out my Pulsae3 Hi Max, what a sad end. Shame. Great you are in one piece. The prop hub, is it Medium, or Magnum? How much do you want for it? thanks otto On 27/09/2011 20:47, Max wrote: If you are interested in what I have for sale, please go to http://s1180.photobucket.com/albums/x402/mboesiger/ to see the pix and description of the components. If you need further description please email me. Max Boesiger Coldwell Banker (208) 250-6234 ________________________________ Message 10 ____________________________________ Time: 01:43:26 PM PST US From: otto souta Subject: Re: Pulsar-List: Re: Parting out my Pulsar3 Is it the same as Bernie Berger's prop hub? otto On 27/09/2011 21:18, mboesiger wrote: > --> Pulsar-List message posted by: "mboesiger" > > I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link > http://s1180.photobucket.com/albums/x402/mboesiger/ > > -------- > I am parting out my pulsar3 purchased in 1998 from Skystar Aviation, Caldwell Idaho > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=353344#353344 > > ________________________________ Message 11 ____________________________________ Time: 01:55:40 PM PST US From: George Gennuso Subject: Re: Pulsar-List: Re: Parting out my Pulsar3 I'm installing an IVO prop and was wondering if you used the IVO spinner or the =0APulsar spinner.- If you used the Pulsar spinner how did you insta ll it?=0A=0AThanks George=0A=0A=0A=0A=0A________________________________=0A From: otto souta =0ATo: pulsar-list@matronics.com=0ASent: Tue, September 27, 2011 1:31:25 PM=0ASubject: Re: Pulsar-List: Re: Parting out my Pulsar3=0A=0AI have seen the picture of your prop hub, but I cannot tell what kind it is. I =0Amay be interested in the radiator also.=0Athaks =0Aotto=0A-=0A=0AOn 27/09/2011 21:18, mboesiger wrote: =0A--> Pulsar-List message posted by: "mboesiger" I just added the =0Apix and description of the Ivoprop in-flight adjustable hub, switch, and =0Aelectr ical parts to the link =0Ahttp://s1180.photobucket.com/albums/x402/mboesig er/ -------- I am parting out =0Amy pulsar3 purchased in 1998 from Skystar Aviation, Caldwell Idaho Read this =0Atopic online here: http://forum ========= =0A ________________________________ Message 12 ____________________________________ Time: 02:02:16 PM PST US From: "Max" Subject: RE: Pulsar-List: Re: Parting out my Pulsar3 Probably, but can't say for sure. The guys at Ivoprop might know. Max Boesiger Coldwell Banker (208) 250-6234 From: owner-pulsar-list-server@matronics.com [mailto:owner-pulsar-list-server@matronics.com] On Behalf Of otto souta Sent: Tuesday, September 27, 2011 2:44 PM Subject: Re: Pulsar-List: Re: Parting out my Pulsar3 Is it the same as Bernie Berger's prop hub? otto On 27/09/2011 21:18, mboesiger wrote: I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link http://s1180.photobucket.com/albums/x402/mboesiger/ -------- I am parting out my pulsar3 purchased in 1998 from Skystar Aviation, Caldwell Idaho Read this topic online here: http://forums.matronics.com/viewtopic.php?p=353344#353344 ________________________________ Message 13 ____________________________________ Time: 02:17:20 PM PST US From: "Max" Subject: RE: Pulsar-List: Re: Parting out my Pulsar3 I ordered the spinner from Aircraft Spruce, and it fit perfectly. I wish I could find the part number, but it was just one they had in stock. Max Boesiger Coldwell Banker (208) 250-6234 From: owner-pulsar-list-server@matronics.com [mailto:owner-pulsar-list-server@matronics.com] On Behalf Of George Gennuso Sent: Tuesday, September 27, 2011 2:55 PM Subject: Re: Pulsar-List: Re: Parting out my Pulsar3 I'm installing an IVO prop and was wondering if you used the IVO spinner or the Pulsar spinner. If you used the Pulsar spinner how did you install it? Thanks George _____ From: otto souta Sent: Tue, September 27, 2011 1:31:25 PM Subject: Re: Pulsar-List: Re: Parting out my Pulsar3 I have seen the picture of your prop hub, but I cannot tell what kind it is. I may be interested in the radiator also. thaks otto On 27/09/2011 21:18, mboesiger wrote: I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link http://s1180.photobucket.com/albums/x402/mboesiger/ -------- I am parting out my pulsar3 purchased in 1998 from Skystar Aviation, Caldwell Idaho Read this topic online here: http://forums.matronics.com/viewtopic.php?p=353344#353344 ________________________________ Message 14 ____________________________________ Time: 02:19:04 PM PST US From: "pilot623" Subject: RE: Pulsar-List: Re: Parting out my Pulsar3 I've ridden in both Max's and Bernie's planes and am sure they are both the Magnum prop with two blades. Ivo recommended that configuration for the 914 while they suggested the Medium with three blades (smaller chord blades) for the 80 and 100 hp Rotax engines. Jim _____ From: owner-pulsar-list-server@matronics.com [mailto:owner-pulsar-list-server@matronics.com] On Behalf Of Max Sent: Tuesday, September 27, 2011 4:01 PM Subject: RE: Pulsar-List: Re: Parting out my Pulsar3 Probably, but can't say for sure. The guys at Ivoprop might know. Max Boesiger Coldwell Banker (208) 250-6234 From: owner-pulsar-list-server@matronics.com [mailto:owner-pulsar-list-server@matronics.com] On Behalf Of otto souta Sent: Tuesday, September 27, 2011 2:44 PM Subject: Re: Pulsar-List: Re: Parting out my Pulsar3 Is it the same as Bernie Berger's prop hub? otto On 27/09/2011 21:18, mboesiger wrote: I just added the pix and description of the Ivoprop in-flight adjustable hub, switch, and electrical parts to the link http://s1180.photobucket.com/albums/x402/mboesiger/ -------- I am parting out my pulsar3 purchased in 1998 from Skystar Aviation, Caldwell Idaho Read this topic online here: http://forums.matronics.com/viewtopic.php?p=353344#353344 ===================< - The Pulsar-List Email Forum utilities such as List Photoshare, and much much --> http://www.matron================== http://forums.matronics.com - List Contribution Web generous nbsp; --> http://www.matronics.com/c= ________________________________ Message 15 ____________________________________ Time: 02:48:57 PM PST US Subject: Re: Pulsar-List: Re: Parting out my Pulsar3 From: "Bernie's Mail" Regarding the prop spinner; I ordered mine from Spruce. It was the BN2. Trac ed the shape of the prop and cut out the openings. Saved the cutouts and mad e the backside for the back of the prop. Was going to have it polished aluni mum but lost control, the spinner got slightly dented so it got painted. Bernie Sent from my Verizon iPhone On Sep 27, 2011, at 4:54 PM, George Gennuso wrote: > I'm installing an IVO prop and was wondering if you used the IVO spinner o r the Pulsar spinner. If you used the Pulsar spinner how did you install it ? > > Thanks George > > From: otto souta > To: pulsar-list@matronics.com > Sent: Tue, September 27, 2011 1:31:25 PM > Subject: Re: Pulsar-List: Re: Parting out my Pulsar3 > > I have seen the picture of your prop hub, but I cannot tell what kind it i s. I may be interested in the radiator also. > thaks > otto > > > On 27/09/2011 21:18, mboesiger wrote: >> >> >> I just added the pix and description of the Ivoprop in-flight adjustable h ub, switch, and electrical parts to the link >> http://s1180.photobucket.com/albums/x402/mboesiger/ >> >> -------- >> I am parting out my pulsar3 purchased in 1998 from Skystar Aviation, Cald well Idaho >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=353344#353344 >> >> >> >> >> >> >> >> >> >> >> > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 16 ____________________________________ Time: 03:07:10 PM PST US Subject: Re: Pulsar-List: Re: Parting out my Pulsar3 From: "Bernie's Mail" Max's build preceeded me by at least a year. I decided on the same prop as M ax because the bugs had been worked out. Max and IVO had resolved what combi nation of hub blade size and number of blades were optimum out the issues so i bought the same setup as Max. Bernie Sent from my Verizon iPhone On Sep 27, 2011, at 5:18 PM, "pilot623" wrote: > I've ridden in both Max's and Bernie's planes and am sure they are both th e Magnum prop with two blades. Ivo recommended that configuration for the 91 4 while they suggested the Medium with three blades (smaller chord blades) f or the 80 and 100 hp Rotax engines. > > Jim > > From: owner-pulsar-list-server@matronics.com [mailto:owner-pulsar-list-ser ver@matronics.com] On Behalf Of Max > Sent: Tuesday, September 27, 2011 4:01 PM > To: pulsar-list@matronics.com > Subject: RE: Pulsar-List: Re: Parting out my Pulsar3 > > Probably, but can't say for sure. The guys at Ivoprop might know. > > > > > > Max Boesiger > Coldwell Banker > (208) 250-6234 > > From: owner-pulsar-list-server@matronics.com [mailto:owner-pulsar-list-ser ver@matronics.com] On Behalf Of otto souta > Sent: Tuesday, September 27, 2011 2:44 PM > To: pulsar-list@matronics.com > Subject: Re: Pulsar-List: Re: Parting out my Pulsar3 > > > > Is it the same as Bernie Berger's prop hub? > otto > > > On 27/09/2011 21:18, mboesiger wrote: > > > I just added the pix and description of the Ivoprop in-flight adjustable h ub, switch, and electrical parts to the link > http://s1180.photobucket.com/albums/x402/mboesiger/ > > -------- > I am parting out my pulsar3 purchased in 1998 from Skystar Aviation, Caldw ell Idaho > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=353344#353344 > > > > > > > > > > > > > ===================< - The Pulsar- List Email Forum utilities such as List Photoshare, and much much --> htt p://www.matron===================http: //forums.matronics.com - List Contribution Web generous nbsp; --> http://www.matronics.com/c > > > > href="http://www.matronics.com/Navigator?Pulsar-List">http://www.matronh ref="http://forums.matronics.com">http://forums.matronics.com > href="http://www.matronics.com/contribution">http://www.matronics.com/c > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 17 ____________________________________ Time: 04:19:22 PM PST US Subject: Re: Pulsar-List: Parting out my Pulsar3 From: Larry Wheat Well, that really sucks. Glad to hear you didn't have any injuries. Be safe. Cheers, Larry On Tue, Sep 27, 2011 at 12:32 PM, Max wrote: > Larry,**** > > I had to make a night forced landing in a very remote part of Idaho. I > had gone off course and didn't realize it until I was nearly out of fuel. I > was unable to make it back to an airport. My Pulsar ran just fine untill it > ran out of fuel. I was unhurt in the landing thanks to the "crash tolerant" > design.**** > > ** ** > > ** ** > > Max Boesiger > Coldwell Banker > (208) 250-6234 **** > > *From:* owner-pulsar-list-server@matronics.com [mailto: > owner-pulsar-list-server@matronics.com] *On Behalf Of *Larry Wheat > *Sent:* Tuesday, September 27, 2011 10:13 AM > > *To:* pulsar-list@matronics.com > *Subject:* Re: Pulsar-List: Parting out my Pulsar3**** > > ** ** > > No, but thanks for the reply. If you can I would like to know what happened > to your aircraft. Thanks, Larry**** > > On Mon, Sep 26, 2011 at 5:41 PM, Max wrote:**** > > Larry,**** > > I'm afraid there isn't much left of the fuselage and wings. All was > damaged enough that they aren't worth the effort (and weight) to fix. I do > have the upper cowl piece. I have a complete panel that was designed and > assembled by Gulf Coast Avionics. Are you interested in any of that? **** > > **** > > Max Boesiger > > (208) 250-6234 **** > > *From:* owner-pulsar-list-server@matronics.com [mailto: > owner-pulsar-list-server@matronics.com] *On Behalf Of *Larry Wheat > *Sent:* Monday, September 26, 2011 2:45 PM > *To:* pulsar-list@matronics.com > *Subject:* Re: Pulsar-List: Parting out my Pulsar3**** > > **** > > Max: I am in the process of building a Pulsar III. What parts of the > fuselage and wings, wheel pants etc do you have. Was the airplane damaged? > To what extent. I am located in MOses Lake, Washington and was thinking > about spares. Thanks in advance. Cheers**** > > On Mon, Sep 26, 2011 at 12:09 PM, Max wrote:**** > > > Pulsar Builders, > I am parting out my Pulsar3 purchased from Skystar Aviation in 1998. It > has a Rotax 914 (which has been sold), a night VFR panel complete, > Cleveland > dual brake system, axles, wheels and tires, Whelen Nav lights and strobes, > and an in-flight adjustable Ivoprop hub and controls for a 2 or 3 blade > configuration. If you have interest in something, let me know, and I will > provide more specific Info. > > > Max Boesiger > Coldwell Banker**** > > (208) 250-6234 > s.com/Navigator?Pulsar-List" > target="_blank">http://www.matronics.com/Navigator?Pulsar-List<%28208%29%20250-6234> > ronics.com/" target="_blank">http://forums.matronics.com > Matt Dralle, List Admin. > ==== > > **** > > > -- > Larry Wheat**** > > * ***** > > * ***** > > *http://www.matronics.com/Navigator?Pulsar-List***** > > *http://forums.matronics.com***** > > *http://www.matronics.com/contribution***** > > * ***** > > * * > > * * > > *arget="_blank">http://www.matronics.com/Navigator?Pulsar-List* > > *ttp://forums.matronics.com* > > *_blank">http://www.matronics.com/contribution* > > * * > > > -- > Larry Wheat**** > > * * > > * * > > ** > > ** > > ** > > ** > > ** > > *http://www.matronics.com/Navigator?Pulsar-List* > > ** > > ** > > *http://forums.matronics.com* > > ** > > ** > > ** > > ** > > *http://www.matronics.com/contribution* > > ** > > * * > > * > > > * > > -- Larry Wheat ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pulsar-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pulsar-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pulsar-list Browse Digests http://www.matronics.com/digest/pulsar-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.