---------------------------------------------------------- Pulsar-List Digest Archive --- Total Messages Posted Sat 10/15/11: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:14 AM - Re: Pulsar-List Digest: 4 Msgs - 10/14/11 (Rick Thomason) ________________________________ Message 1 _____________________________________ Time: 07:14:12 AM PST US Subject: Pulsar-List: Re: Pulsar-List Digest: 4 Msgs - 10/14/11 From: Rick Thomason I have a Master solenoid. I want to be sure that ALL Power can be turned off in case of a short. Sent from my iPhone On Oct 15, 2011, at 1:57 AM, Pulsar-List Digest Server wrote: > * > > ================================================= > Online Versions of Today's List Digest Archive > ================================================= > > Today's complete Pulsar-List Digest can also be found in either of the > two Web Links listed below. The .html file includes the Digest formatted > in HTML for viewing with a web browser and features Hyperlinked Indexes > and Message Navigation. The .txt file includes the plain ASCII version > of the Pulsar-List Digest and can be viewed with a generic text editor > such as Notepad or with a web browser. > > HTML Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 11-10-14&Archive=Pulsar > > Text Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 11-10-14&Archive=Pulsar > > > =============================================== > EMail Version of Today's List Digest Archive > =============================================== > > > ---------------------------------------------------------- > Pulsar-List Digest Archive > --- > Total Messages Posted Fri 10/14/11: 4 > ---------------------------------------------------------- > > > Today's Message Index: > ---------------------- > > 1. 09:39 AM - master switch (william clement) > 2. 10:14 AM - Re: master switch (Larry Wheat) > 3. 10:23 AM - Looking at buying a used kit (jameswells3) > 4. 10:25 AM - Re: master switch (Bob Heiser) > > > > ________________________________ Message 1 _____________________________________ > > > Time: 09:39:33 AM PST US > From: william clement > Subject: Pulsar-List: master switch > > > I am doing some re-wiring of my pulsar xp with a rotax 912. > Are you using only a master switch or a combination of a master switch and > a solenoid? > Is a solenoid necessary to handke the load of the accessories or is there a > switch that can handle the load? > > The aerodesign schematic in the Engine Installation Manual shows only a mas > ter switch. > > Thanks > > Bill Clement > > > > > ________________________________ Message 2 _____________________________________ > > > Time: 10:14:50 AM PST US > Subject: Re: Pulsar-List: master switch > From: Larry Wheat > > All depends on what the load is. On my airplane with the solidstate > equipment, the total current draw is very low. Somewhere around 6 amps with > everything on and operating, including the ignition. I am using a 20A > rocker(lit) with associate ckt bkr. I have used this setup before and have > had no problems. Cheers > > On Fri, Oct 14, 2011 at 9:38 AM, william clement wrote: > >> I am doing some re-wiring of my pulsar xp with a rotax 912. >> Are you using only a master switch or a combination of a master switch and >> a solenoid? >> Is a solenoid necessary to handke the load of the accessories or is there a >> switch that can handle the load? >> >> The aerodesign schematic in the Engine Installation Manual shows only a >> master switch. >> >> Thanks >> >> Bill Clement >> >> >> * >> >> * >> >> > > > -- > Larry Wheat > > ________________________________ Message 3 _____________________________________ > > > Time: 10:23:20 AM PST US > Subject: Pulsar-List: Looking at buying a used kit > From: "jameswells3" > > > I'm looking at buying a used kit in which the work hasn't been started. I was leaning > towards a Sonex or a Zenith 650 both of which are metal. How difficult > is the build process with fiberglass? Also, would it be feasible to use a VW engine? > Any other insight will be appreciated. > > Thanks, > James > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=355017#355017 > > > ________________________________ Message 4 _____________________________________ > > > Time: 10:25:58 AM PST US > From: Bob Heiser > Subject: Re: Pulsar-List: master switch > > *Master Switch only in N912RV. > Get a 20 amp rocker or toggle switch. > * > *God Bless > Bob Heiser* > > On 10/14/2011 11:38 AM, william clement wrote: >> I am doing some re-wiring of my pulsar xp with a rotax 912. >> Are you using only a master switch or a combination of a master >> switch and a solenoid? >> Is a solenoid necessary to handke the load of the accessories or is >> there a switch that can handle the load? >> >> The aerodesign schematic in the Engine Installation Manual shows only >> a master switch. >> >> Thanks >> >> Bill Clement >> >> >> * >> >> >> * > > > > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pulsar-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pulsar-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pulsar-list Browse Digests http://www.matronics.com/digest/pulsar-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.