---------------------------------------------------------- Pulsar-List Digest Archive --- Total Messages Posted Wed 08/08/12: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:22 PM - Missing Skystar Wheel Pant Cutout Template (lancegoddard) 2. 02:47 PM - Re: Missing Skystar Wheel Pant Cutout Template (Larry Wheat) 3. 03:09 PM - Re: Missing Skystar Wheel Pant Cutout Template (lancegoddard) 4. 03:30 PM - Re: Missing Skystar Wheel Pant Cutout Template (Larry Wheat) 5. 03:52 PM - Re: Missing Skystar Wheel Pant Cutout Template (Lance Goddard) 6. 04:01 PM - Re: Missing Skystar Wheel Pant Cutout Template (Larry Wheat) ________________________________ Message 1 _____________________________________ Time: 02:22:37 PM PST US From: lancegoddard Subject: Pulsar-List: Missing Skystar Wheel Pant Cutout Template I am building a Skystar Model III and my chapter 5, main gear wheel pant i nstallation, page 44 refers to the template being on "the latest version o f the P/N 81101.700 template sheet." -I guess they didn't supply me with that "latest version." -Is there anyone who has such a cutout template? -I'd really like to get a copy, and it will fit easily on an 8.5 x 11 i nch sheet.=0A=0AI know some don't fly with wheel pants - and I may not - b ut until I can scrape enough to purchase a Rotax 912 I'm working on such t hings with my kit.=0A=0AThanks,=0A=0ALance Goddard ________________________________ Message 2 _____________________________________ Time: 02:47:19 PM PST US Subject: Re: Pulsar-List: Missing Skystar Wheel Pant Cutout Template From: Larry Wheat Lance, I think I have the template. I have just completed my Pulsar III and am in testing as we speak. If you like I can send a copy to you. I can scan it and send it to your email. Let me know. Cheers, Larry N852LW, 2200 with Sensenich prop. I also have videos on You tube if you care to see what pleasure you are in for. On Wed, Aug 8, 2012 at 2:21 PM, lancegoddard wrote: > I am building a Skystar Model III and my chapter 5, main gear wheel pant > installation, page 44 refers to the template being on "the latest version > of the P/N 81101.700 template sheet." I guess they didn't supply me with > that "latest version." Is there anyone who has such a cutout template? > I'd really like to get a copy, and it will fit easily on an 8.5 x 11 inch > sheet. > > I know some don't fly with wheel pants - and I may not - but until I can > scrape enough to purchase a Rotax 912 I'm working on such things with my > kit. > > Thanks, > > Lance Goddard > -- Larry Wheat ________________________________ Message 3 _____________________________________ Time: 03:09:23 PM PST US From: lancegoddard Subject: Re: Pulsar-List: Missing Skystar Wheel Pant Cutout Template That sounds great, Larry. -Thanks very much. -My templates were from M odel II while the manual is for Model III.=0A=0AMy email lancegoddard@mac. com. -Just looked for and found your videos on youtube. -Will check th em out.=0A=0ALance=0A=0AOn Aug 08, 2012, at 02:46 PM, Larry Wheat wrote:=0A=0ALance, I think I have the template. I have just completed my Pulsar III and am in testing as we speak. If you like I can send a copy to you. I can scan it and send it to your email. Let me know. Cheers, Larry N852LW, 2200 with Sensenich prop. I also have videos on You tube if you care to see what pleasure you are in for.=0A=0AOn Wed, Aug 8, 2012 at 2:21 PM, lancegoddard wrote:=0AI am buildin g a Skystar Model III and my chapter 5, main gear wheel pant installation, page 44 refers to the template being on "the latest version of the P/N 81 101.700 template sheet." -I guess they didn't supply me with that "lates t version." -Is there anyone who has such a cutout template? -I'd real ly like to get a copy, and it will fit easily on an 8.5 x 11 inch sheet.=0A =0AI know some don't fly with wheel pants - and I may not - but until I ca n scrape enough to purchase a Rotax 912 I'm working on such things with my ________________________________ Message 4 _____________________________________ Time: 03:30:20 PM PST US Subject: Re: Pulsar-List: Missing Skystar Wheel Pant Cutout Template From: Larry Wheat I could not find the template but I have the pants almost ready to go on so I traced the cutout for mine. Do you have the single fiberglas gear or the two piece. On Wed, Aug 8, 2012 at 3:08 PM, lancegoddard wrote: > That sounds great, Larry. Thanks very much. My templates were from > Model II while the manual is for Model III. > > My email lancegoddard@mac.com. Just looked for and found your videos on > youtube. Will check them out. > > Lance > > > On Aug 08, 2012, at 02:46 PM, Larry Wheat wrote: > > Lance, I think I have the template. I have just completed my Pulsar III > and am in testing as we speak. If you like I can send a copy to you. I can > scan it and send it to your email. Let me know. Cheers, Larry N852LW, 2200 > with Sensenich prop. I also have videos on You tube if you care to see what > pleasure you are in for. > > On Wed, Aug 8, 2012 at 2:21 PM, lancegoddard wrote: > >> I am building a Skystar Model III and my chapter 5, main gear wheel >> pant installation, page 44 refers to the template being on "the latest >> version of the P/N 81101.700 template sheet." I guess they didn't supply >> me with that "latest version." Is there anyone who has such a cutout >> template? I'd really like to get a copy, and it will fit easily on an 8.5 >> x 11 inch sheet. >> >> I know some don't fly with wheel pants - and I may not - but until I can >> scrape enough to purchase a Rotax 912 I'm working on such things with my >> kit. >> >> Thanks, >> >> Lance Goddard >> > > > -- > Larry Wheat > > *ta-mce-href="http://www.matronics.com/Navigator?Pulsar-List">http://www..com" data-mce-href="http://forums.matronics.com">http://forums.matronic" data-mce-href="http://www.matronics.com/contribution">http://www.matro=================== * > > -- Larry Wheat ________________________________ Message 5 _____________________________________ Time: 03:52:26 PM PST US Subject: Re: Pulsar-List: Missing Skystar Wheel Pant Cutout Template From: Lance Goddard Single piece. Do appreciate this. sent from my iPhone On Aug 8, 2012, at 3:29 PM, Larry Wheat wrote: > I could not find the template but I have the pants almost ready to go on so I traced the cutout for mine. Do you have the single fiberglas gear or the two piece. > > On Wed, Aug 8, 2012 at 3:08 PM, lancegoddard wrote: > That sounds great, Larry. Thanks very much. My templates were from Model II while the manual is for Model III. > > My email lancegoddard@mac.com. Just looked for and found your videos on youtube. Will check them out. > > Lance > > > On Aug 08, 2012, at 02:46 PM, Larry Wheat wrote: > >> Lance, I think I have the template. I have just completed my Pulsar III and am in testing as we speak. If you like I can send a copy to you. I can scan it and send it to your email. Let me know. Cheers, Larry N852LW, 2200 with Sensenich prop. I also have videos on You tube if you care to see what pleasure you are in for. >> >> On Wed, Aug 8, 2012 at 2:21 PM, lancegoddard wrote: >> I am building a Skystar Model III and my chapter 5, main gear wheel pant installation, page 44 refers to the template being on "the latest version of the P/N 81101.700 template sheet." I guess they didn't supply me with that "latest version." Is there anyone who has such a cutout template? I'd really like to get a copy, and it will fit easily on an 8.5 x 11 inch sheet. >> >> I know some don't fly with wheel pants - and I may not - but until I can scrape enough to purchase a Rotax 912 I'm working on such things with my kit. >> >> Thanks, >> >> Lance Goddard >> >> >> >> -- >> Larry Wheat >> ta-mce-href="http://www.matronics.com/Navigator?Pulsar-List">http://www..com" data-mce-href="http://forums.matronics.com">http://forums.matronic" data-mce-href="http://www.matronics.com/contribution">http://www.matro=================== > > > > -- > Larry Wheat > > > ________________________________ Message 6 _____________________________________ Time: 04:01:09 PM PST US Subject: Re: Pulsar-List: Missing Skystar Wheel Pant Cutout Template From: Larry Wheat Then cut to the outside of the line you should be good. Cheers N852LW On Wed, Aug 8, 2012 at 3:51 PM, Lance Goddard wrote: > Single piece. Do appreciate this. > > sent from my iPhone > > On Aug 8, 2012, at 3:29 PM, Larry Wheat wrote: > > I could not find the template but I have the pants almost ready to go on > so I traced the cutout for mine. Do you have the single fiberglas gear or > the two piece. > > On Wed, Aug 8, 2012 at 3:08 PM, lancegoddard wrote: > >> That sounds great, Larry. Thanks very much. My templates were from >> Model II while the manual is for Model III. >> >> My email lancegoddard@mac.com. Just looked for and found your videos on >> youtube. Will check them out. >> >> Lance >> >> >> On Aug 08, 2012, at 02:46 PM, Larry Wheat wrote: >> >> Lance, I think I have the template. I have just completed my Pulsar >> III and am in testing as we speak. If you like I can send a copy to you. I >> can scan it and send it to your email. Let me know. Cheers, Larry N852LW, >> 2200 with Sensenich prop. I also have videos on You tube if you care to see >> what pleasure you are in for. >> >> On Wed, Aug 8, 2012 at 2:21 PM, lancegoddard wrote: >> >>> I am building a Skystar Model III and my chapter 5, main gear wheel >>> pant installation, page 44 refers to the template being on "the latest >>> version of the P/N 81101.700 template sheet." I guess they didn't supply >>> me with that "latest version." Is there anyone who has such a cutout >>> template? I'd really like to get a copy, and it will fit easily on an 8.5 >>> x 11 inch sheet. >>> >>> I know some don't fly with wheel pants - and I may not - but until I can >>> scrape enough to purchase a Rotax 912 I'm working on such things with my >>> kit. >>> >>> Thanks, >>> >>> Lance Goddard >>> >> >> >> >> -- >> Larry Wheat >> >> *ta-mce-href="http://www.matronics.com/Navigator?Pulsar-List">http://www..com" data-mce-href="http://forums.matronics.com">http://forums.matronic" data-mce-href="http://www.matronics.com/contribution">http://www.matro=================== * >> >> > > > -- > Larry Wheat > > * > > * > > -- Larry Wheat ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pulsar-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pulsar-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pulsar-list Browse Digests http://www.matronics.com/digest/pulsar-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.