---------------------------------------------------------- Pulsar-List Digest Archive --- Total Messages Posted Wed 02/20/13: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:13 AM - Re: Aileron Trim Tabs-Anyone Using? Photos to Share? (Gary Middleton) 2. 01:08 PM - Pulsar XP Instrument Panel Console (Michael P) 3. 04:12 PM - Re: Pulsar XP Instrument Panel Console (HUGH COULTER) ________________________________ Message 1 _____________________________________ Time: 09:13:50 AM PST US From: Gary Middleton Subject: Re: Pulsar-List: Aileron Trim Tabs-Anyone Using? Photos to Share? FWIW: N9DK does not have aileron trim tabs, just servo trim.- I often fly hands-off for extended periods with only minor rudder inputs every few min utes.- In fact, it makes you lazy and I may look down at my flight plane, phone or sectional for much longer than I really should. I do tweak the tr im during the flight to compensate for fuel burn, and she is more stable at certain speeds than others.- ~120mph seems to be a sweet spot for the lo ngest period of time without control input needed.- =0A=0A_______________ _________________=0A From: triumphrider =0ATo: pulsar-list@matronics.com =0ASent: Tuesday, February 19, 2013 9:44 AM=0ASubject: Pulsar-List: Aileron Trim Tabs-Anyone Using? Photos to Share consultant@gmail.com>=0A=0AWe had a discussion on the left roll tendency th at my Pulsar XP has. It doesn't track straight-I have to have a slight amou nt of right pressure on the center stick to keep it tracking straight. Let go and it begins a slight left turn. Kind of a pain when you need to review a sectional, etc.=0A=0AI usually fly solo, so perhaps the weight on the le ft seat only is also a factor? =0A=0AAre you using a aileron trim tab(s)? D oes anyone have a picture of a small trim tab they are using for on their a ircraft and perhaps, a source for them? =0A=0AI have a small trim tab on th e rudder-it's about an inch wide and at a 30-degree angle or so from the ru dder tab-Is this the same size I should be looking for?=0A=0A=0A=0A=0ARead this topic online here:=0A=0Ahttp://forums.matronics.com/viewtopic.php?p= = ________________________________ Message 2 _____________________________________ Time: 01:08:42 PM PST US Subject: Pulsar-List: Pulsar XP Instrument Panel Console From: Michael P Hello All, My XP came configured with a left/right two piece instrument panel setup. The center armrest is extended forward of the seats and is attached both to the floor and the top of the fuselage just behind the instrument panel, forming an extended floor console just forward of the stick. This effectively divides the instrument panel in two halves, well less than halves actually as the center console which is thus formed can only accommodate 3" instruments in a vertical configuration. I don't have the build manuals so I am wondering if this is a standard configuration for the XP or is it a modification?... I've seen some pictures of other pulsars which seem not to have this "extended floor" console. The construction is rather beefy in places which indicates a structural function, as implemented it does stiffen the hull on the longitudinal axis as well as improves torsional strength as well. Thanks in advance, M Sent from my ASUS Pad ________________________________ Message 3 _____________________________________ Time: 04:12:32 PM PST US From: "HUGH COULTER" Subject: Re: Pulsar-List: Pulsar XP Instrument Panel Console Yours in no9t standard. Cloarke On Wed, 20 Feb 2013 16:07:57 -0500 Michael P wrote: > > > Hello All, > > My XP came configured with a left/right two piece >instrument panel setup. > > The center armrest is extended forward of the seats and >is attached both to the floor and the top of the fuselage >just behind the instrument panel, forming an extended >floor console just forward of the stick. > > This effectively divides the instrument panel in two >halves, well less than halves actually as the center >console which is thus formed can only accommodate 3" >instruments in a vertical configuration. > > I don't have the build manuals so I am wondering if this >is a standard configuration for the XP or is it a >modification?... I've seen some pictures of other pulsars >which seem not to have this "extended floor" console. > > The construction is rather beefy in places which >indicates a structural function, as implemented it does >stiffen the hull on the longitudinal axis as well as >improves torsional strength as well. > > Thanks in advance, > M > > Sent from my ASUS Pad > > >Un/Subscription, >Forums! >Admin. > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pulsar-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pulsar-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pulsar-list Browse Digests http://www.matronics.com/digest/pulsar-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.