---------------------------------------------------------- Pulsar-List Digest Archive --- Total Messages Posted Wed 07/03/13: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:31 AM - Earl's oil cooler (GREGSMI@aol.com) 2. 10:46 AM - Re: EXTERNAL: Earl's oil cooler (Cowan, Michael) 3. 11:19 AM - Re: EXTERNAL: Earl's oil cooler (pilot623) 4. 01:22 PM - Re: Earl's oil cooler (Dean) 5. 01:54 PM - Re: EXTERNAL: Earl's oil cooler (Cowan, Michael) 6. 02:04 PM - Re: Earl's oil cooler (Ray Thurman) ________________________________ Message 1 _____________________________________ Time: 10:31:11 AM PST US From: GREGSMI@aol.com Subject: Pulsar-List: Earl's oil cooler I am needing an oil cooler for the 912 engine. I know they were supplied by Earl's but think they were discontinued. Does anyone have the measurements for the cooler? Thanks, see you in Lawrence. Greg ________________________________ Message 2 _____________________________________ Time: 10:46:14 AM PST US From: "Cowan, Michael" Subject: RE: EXTERNAL: Pulsar-List: Earl's oil cooler My kit has a pair of coolers installed on the floor just ahead of the fwd s eat bulkhead. Is that what you need? - Mike From: owner-pulsar-list-server@matronics.com [mailto:owner-pulsar-list-serv er@matronics.com] On Behalf Of GREGSMI@aol.com Sent: Wednesday, July 03, 2013 10:29 AM Subject: EXTERNAL: Pulsar-List: Earl's oil cooler I am needing an oil cooler for the 912 engine. I know they were supplied by Earl's but think they were discontinued. Does anyone have the measurements for the cooler? Thanks, see you in Lawrence. Greg ________________________________ Message 3 _____________________________________ Time: 11:19:54 AM PST US From: "pilot623" Subject: RE: EXTERNAL: Pulsar-List: Earl's oil cooler Mike, Those are probably your water radiators. Jim _____ From: owner-pulsar-list-server@matronics.com [mailto:owner-pulsar-list-server@matronics.com] On Behalf Of Cowan, Michael Sent: Wednesday, July 03, 2013 12:43 PM Subject: RE: EXTERNAL: Pulsar-List: Earl's oil cooler My kit has a pair of coolers installed on the floor just ahead of the fwd seat bulkhead. Is that what you need? - Mike From: owner-pulsar-list-server@matronics.com [mailto:owner-pulsar-list-server@matronics.com] On Behalf Of GREGSMI@aol.com Sent: Wednesday, July 03, 2013 10:29 AM Subject: EXTERNAL: Pulsar-List: Earl's oil cooler I am needing an oil cooler for the 912 engine. I know they were supplied by Earl's but think they were discontinued. Does anyone have the measurements for the cooler? Thanks, see you in Lawrence. Greg ====================== p; - The Pulsar-List Email Forum - avigator to browse ist Un/Subscription, Day Browse, Chat, FAQ, :p> p://www.matronics.com/Navigator?Pulsar-List">http://www.matronics.com/Naviga tor?Pulsar-List ====================== p; - MATRONICS WEB FORUMS - via the Web Forums! p://forums.matronics.com">http://forums.matronics.com ====================== p; - List Contribution Web Site - support! p; -Matt Dralle, List Admin. p://www.matronics.com/contribution">http://www.matronics.com/contribution ====================== ________________________________ Message 4 _____________________________________ Time: 01:22:29 PM PST US From: Dean Subject: Re: Pulsar-List: Earl's oil cooler Greg, The cooler was Earl's 41908. Measured 11.75" x 5.75" x 2" cooling area. With mounting tabs it was 13". That was with my 1994 kit, serial # 309. Dean On Jul 3, 2013, at 12:28 PM, gregsmi@aol.com wrote: > I am needing an oil cooler for the 912 engine. I know they were supplied by Earl's but think they were discontinued. Does anyone have the measurements for the cooler? > > Thanks, see you in Lawrence. > Greg > > > ________________________________ Message 5 _____________________________________ Time: 01:54:27 PM PST US From: "Cowan, Michael" Subject: RE: EXTERNAL: Pulsar-List: Earl's oil cooler It's been a long day bro. You're absolutely right. I have the oil cooler as well. Greg, I'll measure the oil cooler and get b ack to you. - Mike From: owner-pulsar-list-server@matronics.com [mailto:owner-pulsar-list-serv er@matronics.com] On Behalf Of pilot623 Sent: Wednesday, July 03, 2013 11:17 AM Subject: RE: EXTERNAL: Pulsar-List: Earl's oil cooler Mike, Those are probably your water radiators. Jim ________________________________ From: owner-pulsar-list-server@matronics.com [mailto:owner-pulsar-list-server@matronics.com] On Behalf Of Cowan, Michael Sent: Wednesday, July 03, 2013 12:43 PM Subject: RE: EXTERNAL: Pulsar-List: Earl's oil cooler My kit has a pair of coolers installed on the floor just ahead of the fwd s eat bulkhead. Is that what you need? - Mike From: owner-pulsar-list-server@matronics.com [mailto:owner-pulsar-list-server@matronics.com] On Behalf Of GREGSMI@aol.com Sent: Wednesday, July 03, 2013 10:29 AM ; pulsar-list@matronics.com Subject: EXTERNAL: Pulsar-List: Earl's oil cooler I am needing an oil cooler for the 912 engine. I know they were supplied by Earl's but think they were discontinued. Does anyone have the measurements for the cooler? Thanks, see you in Lawrence. Greg ====================== p; - The Pulsar-List Email Forum - avigator to browse ist Un/Subscription, Day Browse, Chat, FAQ, :p> p://www.matronics.com/Navigator?Pulsar-List">http://www.matronics.com/Navig ator?Pulsar-List ====================== p; - MATRONICS WEB FORUMS - via the Web Forums! p://forums.matronics.com">http://forums.matronics.com ====================== p; - List Contribution Web Site - support! p; -Matt Dralle, List Admin. p://www.matronics.com/contribution">http://www.matronics.com/contribution ====================== href="http://www.matronics.com/Navigator?Pulsar-List">http://www.matronhr ef="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c ________________________________ Message 6 _____________________________________ Time: 02:04:30 PM PST US From: Ray Thurman Subject: Re: Pulsar-List: Earl's oil cooler I found my receipt from Earls. Mine was also a 41908 but I returned it for the smaller 41008, measures 11.75" x 3" Ray On 7/3/2013 3:20 PM, Dean wrote: > Greg, > The cooler was Earl's 41908. Measured 11.75" x 5.75" x 2" cooling > area. With mounting tabs it was 13". That was with my 1994 kit, > serial # 309. > Dean > > > On Jul 3, 2013, at 12:28 PM, gregsmi@aol.com > wrote: > >> I am needing an oil cooler for the 912 engine. I know they were >> supplied by Earl's but think they were discontinued. Does anyone have >> the measurements for the cooler? >> Thanks, see you in Lawrence. >> Greg >> * >> >> >> * > > * > > > * ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pulsar-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pulsar-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pulsar-list Browse Digests http://www.matronics.com/digest/pulsar-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.