---------------------------------------------------------- Pulsar-List Digest Archive --- Total Messages Posted Thu 08/22/13: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:44 AM - Needing 912 parts (GREGSMI@aol.com) 2. 02:03 PM - Re: Needing 912 parts (Brian Anderson) 3. 02:34 PM - Re: Needing 912 parts (Esa) 4. 02:49 PM - Re: Needing 912 parts (Bob Heiser) 5. 04:39 PM - Re: Needing 912 parts (HUGH COULTER) 6. 09:01 PM - Re: [Pulsar-Aviators] Needing 912 parts (Lance Goddard) ________________________________ Message 1 _____________________________________ Time: 05:44:04 AM PST US From: GREGSMI@aol.com Subject: Pulsar-List: Needing 912 parts Guys, I am working on a Pulsar and have a 80HP 912 engine that is missing a few parts. I will order from Lockwood if we cannot find here. Crossover equalizer tube for carbs Fuel pump Banjo oil fitting Vacuum pump Voltage regulator Air cleaners Also, got a question, do you use a gasket on the Aerodesigns exhaust system where the expanded pipe enters the head port? Thanks, see you next week in Lawrence. Greg ________________________________ Message 2 _____________________________________ Time: 02:03:35 PM PST US From: Brian Anderson Subject: Re: Pulsar-List: Needing 912 parts Hi Greg, Re the exhaust fitting - - - the system ought to use the Rotax nipples, welded to the exhaust system, at the head entry points. The exhaust ports on the heads have a countersunk area that mates with the crox flange on the nipples. It is tightened in place with the solid flange, and no gasket is used. Beware - - - the Aerodesignes exhaust system will very likely crack near the rear two cylinders ! Regards, Brian On 23/08/2013, at 12:41 AM, GREGSMI@aol.com wrote: > Guys, I am working on a Pulsar and have a 80HP 912 engine that is missing a few parts. I will order from Lockwood if we cannot find here. > > Crossover equalizer tube for carbs > Fuel pump > Banjo oil fitting > Vacuum pump > Voltage regulator > Air cleaners > > Also, got a question, do you use a gasket on the Aerodesigns exhaust system where the expanded pipe enters the head port? > > Thanks, see you next week in Lawrence. > > Greg > > > ________________________________ Message 3 _____________________________________ Time: 02:34:58 PM PST US From: Esa Subject: RE: Pulsar-List: Needing 912 parts Hi, What has happen to Rick's design and Rick? Just curious to know? Have not h eard anything from him a while. Esa Pulsar XP Rotax 911 -----Original Message----- From: "Brian Anderson" Sent: =8E8/=8E22/=8E2013 4:12 PM Subject: Re: Pulsar-List: Needing 912 parts Hi Greg, Re the exhaust fitting - - - the system ought to use the Rotax nipples, wel ded to the exhaust system, at the head entry points. The exhaust ports on the heads have a countersunk area that mates with the crox flange on the ni pples. It is tightened in place with the solid flange, and no gasket is use d. Beware - - - the Aerodesignes exhaust system will very likely crack near t he rear two cylinders ! Regards, Brian On 23/08/2013, at 12:41 AM, GREGSMI@aol.com wrote: Guys, I am working on a Pulsar and have a 80HP 912 engine that is missing a few parts. I will order from Lockwood if we cannot find here. Crossover equalizer tube for carbs Fuel pump Banjo oil fitting Vacuum pump Voltage regulator Air cleaners Also, got a question, do you use a gasket on the Aerodesigns exhaust system where the expanded pipe enters the head port? Thanks, see you next week in Lawrence. Greg 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D ________________________________ Message 4 _____________________________________ Time: 02:49:57 PM PST US From: Bob Heiser Subject: Re: Pulsar-List: Needing 912 parts Greg, I have a fuel pump. Bought it back in 2006 when Bob Hartunian put a group purchase together. Still packed as delivered. Think rotax came out with a new fuel pump 2010 or 2011. Let me know if you are interested. Still have a few other Pulsar parts: Wheel pants (large wheels) tool to pull wing pins. *God Bless Bob (W7IKT) Carol (N5CBQ) Heiser* On 8/22/2013 7:41 AM, GREGSMI@aol.com wrote: > Guys, I am working on a Pulsar and have a 80HP 912 engine that is > missing a few parts. I will order from Lockwood if we cannot find here. > Crossover equalizer tube for carbs > Fuel pump > Banjo oil fitting > Vacuum pump > Voltage regulator > Air cleaners > Also, got a question, do you use a gasket on the Aerodesigns exhaust > system where the expanded pipe enters the head port? > Thanks, see you next week in Lawrence. > Greg > * > > > * > > No virus found in this message. > Checked by AVG - www.avg.com > ________________________________ Message 5 _____________________________________ Time: 04:39:44 PM PST US From: "HUGH COULTER" Subject: Re: Pulsar-List: Needing 912 parts Greg Crossover equalizer tube. Use rubber tubing. I have a new fuel pump. Clarke On Thu, 22 Aug 2013 08:41:49 -0400 (EDT) GREGSMI@aol.com wrote: > Guys, I am working on a Pulsar and have a 80HP 912 >engine that is missing a > few parts. I will order from Lockwood if we cannot find >here. > > Crossover equalizer tube for carbs >Fuel pump > Banjo oil fitting > Vacuum pump > Voltage regulator > Air cleaners > > Also, got a question, do you use a gasket on the >Aerodesigns exhaust system > where the expanded pipe enters the head port? > > Thanks, see you next week in Lawrence. > > Greg ________________________________ Message 6 _____________________________________ Time: 09:01:42 PM PST US Subject: Pulsar-List: Re: [Pulsar-Aviators] Needing 912 parts From: Lance Goddard I have a couple of air filters I'll bring with me, Greg. The 912iS I'm installing uses the same one as the 914 so they are not needed. I also have a dual accelerator cable for the 912/912S if anyone needs one. I think they are about $150 and this will be $70. These items came with the firewall forward kit for the 912 I bought from Bob Gillett. See you soon in Lawrence. Lance Goddard On Aug 22, 2013, at 5:41 AM, gregsmi@aol.com wrote: > > Guys, I am working on a Pulsar and have a 80HP 912 engine that is missing a few parts. I will order from Lockwood if we cannot find here. > > Crossover equalizer tube for carbs > Fuel pump > Banjo oil fitting > Vacuum pump > Voltage regulator > Air cleaners > > Also, got a question, do you use a gasket on the Aerodesigns exhaust system where the expanded pipe enters the head port? > > Thanks, see you next week in Lawrence. > > Greg > > __._,_.___ > Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (1) > RECENT ACTIVITY: New Members 1 New Photos 5 > Visit Your Group > Switch to: Text-Only, Daily Digest - Unsubscribe - Terms of Use - Send us Feedback > . > > __,_._,___ ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pulsar-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pulsar-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pulsar-list Browse Digests http://www.matronics.com/digest/pulsar-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.