---------------------------------------------------------- Pulsar-List Digest Archive --- Total Messages Posted Mon 08/26/13: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:28 AM - Re: Re: 582 blue head upgrade question (dougwitkowski@netscape.net) 2. 07:50 PM - Arriving Pulsars Thursday, KLWC (GREGSMI@aol.com) 3. 10:33 PM - Re: Arriving Pulsars Thursday, KLWC (Glenn Pearce) ________________________________ Message 1 _____________________________________ Time: 08:28:32 AM PST US Subject: Re: Pulsar-List: Re: 582 blue head upgrade question From: dougwitkowski@netscape.net I was going to try coolant control too but worried about the slug of cold w ater in the isolated radiator suddenly cooling the motor. Thought it was b etter to bottle up the heat in the whole system. -----Original Message----- From: Clark Foster Sent: Sat, Aug 24, 2013 5:57 pm Subject: Re: Pulsar-List: Re: 582 blue head upgrade question Hello 582 operators It may be is easier to shut of the coolant line instead of the air flowin g thru the radiator. I installed a valve in one of the 5/8 coolant lines between the radiators . It is operated via push/pull cable. Works great as I can ramp down the coolant flow to the rt radiator. The cab in heater works great as it routes the heated air from the still operating left radiator. Real simple to install too.........Clark -----Original Message----- From: BobP Sent: Sat, Aug 24, 2013 1:52 am Subject: Pulsar-List: Re: 582 blue head upgrade question George, sorry for the delay in replying. I had to take some photos of the ouvers -see pictures on the Picasa link at the bottom of this message. The guy ho built the plane and fitted the louvers operated them by a bicycle type owden tension cable that puuled them open against an automatic return sprin g. t worked well but he used a rotating knob on a screw-thread to pull the cab le nd this took minutes to wind all the way in. A 4 stage lever (like the orig inal ulsar flap lever but much smaller would have been better. I replaced the cable with a small geared electric motor driving a worn and orm-wheel and micro switched to limit the travel and give feedback when ful ly pen and shut. It takes about 10 seconds to move from open to shut and works ell. But is a bit OTT unless you want to operate the louvers automatically from water temperature sensor (in my "to do" list). The port radiator does not have adjustable flaps but is sometimes masked ccording to ambient temperature - fully masked below freezing, fully unmask ed bove 28 degs C and part masked anywhere in between. Although they work well the louvers would be difficult to make. A simpler rrangement would be to make a "roller door" type blind operating sideways and ith the slats constructed from aluminium piano hinges. This is also in my " to o" list for the port radiator. I've also included a few general pictures of the engine showing the expansi on ottle and the oil injection tank. Let me know if you need any more info, the link to photos (you might need t o aste it into your browser) is: https://picasaweb.google.com/lh/sredir?uname=112798458580624512570&target =ALBUM&id=5915258489653005857&authkey=Gv1sRgCJfakK_smobC-QE&invite= CNO3q6AF&feat=email -------- obP ead this topic online here: http://forums.matronics.com/viewtopic.php?p=407404#407404 arget="_blank">http://www.matronics.com/Navigator?Pulsar-List p://forums.matronics.com blank">http://www.matronics.com/contribution -= - The Pulsar-List Email Forum - -= Use the Matronics List Features Navigator to browse -= the many List utilities such as List Un/Subscription, -= Archive Search & Download, 7-Day Browse, Chat, FAQ, -= Photoshare, and much much more: - -= --> http://www.matronics.com/Navigator?Pulsar-List - -======================== -= - MATRONICS WEB FORUMS - -= Same great content also available via the Web Forums! - -= --> http://forums.matronics.com - -======================== -= - List Contribution Web Site - -= Thank you for your generous support! -= -Matt Dralle, List Admin. -= --> http://www.matronics.com/contribution -======================== ________________________________ Message 2 _____________________________________ Time: 07:50:32 PM PST US From: GREGSMI@aol.com Subject: Pulsar-List: Arriving Pulsars Thursday, KLWC I checked with the airport today and things are on schedule to have both runways open Thursday. Please send me your cell number and I will contact you if anything changes. I will be at the airport Wednesday and will stay on top of the situation. Be safe, looking forward to seeing everyone. Greg cell 210-639-5764 ________________________________ Message 3 _____________________________________ Time: 10:33:47 PM PST US From: Glenn Pearce Subject: RE: Pulsar-List: Arriving Pulsars Thursday, KLWC Greg: You do a fine job. Glenn From: GREGSMI@aol.com Subject: Pulsar-List: Arriving Pulsars Thursday=2C KLWC =0A =0A =0A =0A =0A I checked with the airport today and things are on schedule to have both =0A runways open Thursday. Please send me your cell number and I will contact y ou if =0A anything changes. I will be at the airport Wednesday and will stay on top o f the =0A situation.=0A =0A Be safe=2C looking forward to seeing everyone.=0A =0A Greg=0A cell 210-639-5764=0A =0A =0A ============0A ============0A ============0A ============0A =0A ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pulsar-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pulsar-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pulsar-list Browse Digests http://www.matronics.com/digest/pulsar-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.