---------------------------------------------------------- Pulsar-List Digest Archive --- Total Messages Posted Thu 10/10/13: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:47 AM - Re: Pulsar Spar (BobP) 2. 09:20 AM - Re: Pulsar Spar (HUGH COULTER) 3. 01:49 PM - Re: Pulsar Spar (dave s) 4. 03:13 PM - Re: Re: Pulsar Spar (GREGSMI@aol.com) 5. 03:15 PM - Re: Re: Pulsar Spar (GREGSMI@aol.com) 6. 03:39 PM - Re: Re: Pulsar Spar (freedom4life) ________________________________ Message 1 _____________________________________ Time: 02:47:16 AM PST US Subject: Pulsar-List: Re: Pulsar Spar From: "BobP" If you can't get composite spars would it be possible to construct spruce spars as per the earlier Pulsars? I guess in this case the MTOW would be limited to that of the earlier Pulsars. Perhaps someone knows and can advise if wooden spars would be compatible with the other bits you have for your wings? Jst ideas BobP -------- BobP Read this topic online here: http://forums.matronics.com/viewtopic.php?p=410199#410199 ________________________________ Message 2 _____________________________________ Time: 09:20:53 AM PST US From: "HUGH COULTER" Subject: Re: Pulsar-List: Pulsar Spar If your kit has fuel tanks in the wings, do not use blue foam ribs. They will desolve. Clarke On Mon, 7 Oct 2013 16:14:46 -0700 "dave s" wrote: > > > Hi, Im new to the Pulsar, (not new to building) I have >just bought an un started kit from a guy that has gone >into care. the kit was delivered I believe in 1997 (to >the UK) and is almost complete. it has a new (then) 582 >with all the yellow bungs still in, 2 props, still in >boxes (one wood and one ground adjustable) > there is composite wing skins and composite L/E "D" >boxes (inner ones are tanks) lots of blue and brown foam >ribs etc. and I have all the engine, wing and fuse kits >(bags of bits) and it all appears complete except for >there are no main spars! Can these still be purchased as >I assume they will be the composite variety? > > Also I have borrowed some construction books from >another Pulsar owner but they refer to wood wings so if >anyone has some with composite wings I can borrow so I >can copy and return it would be appreciated. > > thanks in advance > > Dave Stephens > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=410028#410028 > > > > > > > >Un/Subscription, >Forums! >Admin. > > > ________________________________ Message 3 _____________________________________ Time: 01:49:57 PM PST US Subject: Pulsar-List: Re: Pulsar Spar From: "dave s" I have both blue foam and the brown foam ribs. although the wings are designed for fuel, I am still toying with the idea of a fuselage tank. all depends what spar I end up with. Dave Read this topic online here: http://forums.matronics.com/viewtopic.php?p=410249#410249 ________________________________ Message 4 _____________________________________ Time: 03:13:15 PM PST US From: GREGSMI@aol.com Subject: Re: Pulsar-List: Re: Pulsar Spar The composite spar ribs are different than the wood spar ribs. In a message dated 10/10/2013 2:30:08 P.M. Central Daylight Time, matronics@panth.co.uk writes: --> Pulsar-List message posted by: "BobP" If you can't get composite spars would it be possible to construct spruce spars as per the earlier Pulsars? I guess in this case the MTOW would be limited to that of the earlier Pulsars. Perhaps someone knows and can advise if wooden spars would be compatible with the other bits you have for your wings? Jst ideas BobP -------- BobP Read this topic online here: http://forums.matronics.com/viewtopic.php?p=410199#410199 ________________________________ Message 5 _____________________________________ Time: 03:15:09 PM PST US From: GREGSMI@aol.com Subject: Re: Pulsar-List: Re: Pulsar Spar Dave, a fuselage tank with a 912 engine exceeds the design weight. In a message dated 10/10/2013 3:50:11 P.M. Central Daylight Time, davestephens@dssl.co.uk writes: --> Pulsar-List message posted by: "dave s" I have both blue foam and the brown foam ribs. although the wings are designed for fuel, I am still toying with the idea of a fuselage tank. all depends what spar I end up with. Dave Read this topic online here: http://forums.matronics.com/viewtopic.php?p=410249#410249 ________________________________ Message 6 _____________________________________ Time: 03:39:16 PM PST US From: "freedom4life" Subject: Re: Pulsar-List: Re: Pulsar Spar Bob Taylor has a set of wings for sale. I don't know what spars they might have but I believe they have the blue foam ribs. I have both blue foam and the brown foam ribs. although the wings are designed for fuel, I am still toying with the idea of a fuselage tank. all depends what spar I end up with. Dave Read this topic online here: http://forums.matronics.com/viewtopic.php?p=410249#410249 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pulsar-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pulsar-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pulsar-list Browse Digests http://www.matronics.com/digest/pulsar-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.