---------------------------------------------------------- Pulsar-List Digest Archive --- Total Messages Posted Fri 12/27/13: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 11:18 AM - 582 prop and gearbox ratio r u using (philb) 2. 04:00 PM - Re: 582 prop and gearbox ratio r u using (HUGH COULTER) 3. 04:12 PM - Re: 582 prop and gearbox ratio r u using (Tim Rhodenbaugh) 4. 04:27 PM - Re: 582 prop and gearbox ratio r u using (Keith Palmer) ________________________________ Message 1 _____________________________________ Time: 11:18:26 AM PST US Subject: Pulsar-List: 582 prop and gearbox ratio r u using From: "philb" as i am thinking of getting a pulsar and would like to optimise prop gearbox ratio for perfrmance so was wondering what u are all using prop wise diam and pitch gearbox ratio static rpm climb rate one up take off roll one up approx and cruise speeds at say 5000 rpm 5600 and flat out it could even become a sticky phil Read this topic online here: http://forums.matronics.com/viewtopic.php?p=416244#416244 ________________________________ Message 2 _____________________________________ Time: 04:00:02 PM PST US From: "HUGH COULTER" Subject: Re: Pulsar-List: 582 prop and gearbox ratio r u using I have a series I Pulsar XP. It is located at Bremerton National airport in Western Washington. I am considering selling it to the right buyer. Clarke On Fri, 27 Dec 2013 11:17:56 -0800 "philb" wrote: > > > as i am thinking of getting a pulsar and would like to >optimise prop gearbox ratio for perfrmance so was >wondering what u are all using > prop wise diam and pitch > gearbox ratio > static rpm > climb rate one up > take off roll one up approx > and cruise speeds at say 5000 rpm 5600 and flat >out > it could even become a sticky > phil > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=416244#416244 > > > > > > > >Admin. >Un/Subscription, >Forums! > > > ________________________________ Message 3 _____________________________________ Time: 04:12:33 PM PST US Subject: Re: Pulsar-List: 582 prop and gearbox ratio r u using From: Tim Rhodenbaugh My pulsar is for sale. series one 582 wood wing Two time Oshkosh winner Tim Rhodenbaugh. Located in ohio Sent from my iPhone On Dec 27, 2013, at 11:17 AM, "philb" wrote: > > as i am thinking of getting a pulsar and would like to optimise prop gearbox ratio for perfrmance so was wondering what u are all using > prop wise diam and pitch > gearbox ratio > static rpm > climb rate one up > take off roll one up approx > and cruise speeds at say 5000 rpm 5600 and flat out > it could even become a sticky > phil > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=416244#416244 > > > > > > > > > > ________________________________ Message 4 _____________________________________ Time: 04:27:41 PM PST US From: "Keith Palmer" Subject: RE: Pulsar-List: 582 prop and gearbox ratio r u using Using a fixed prop is always a compromise from the start, you must decide what you need the most (you can't have it all) and by formuli you can calculate which prop, pitch, length & ratio will be the best in your circumstances . There is a lot to read on the internet on the subject, and I feel it is the most under rated part of setting up an aircraft. I found it very fascinating and rewarding. It's like setting up a one geared tractor to serve your particular purpose. If your could fit an 'in flight adjustable prop' you could have the best of both worlds, converting your tractor into a 6 speed sports car. Regards Keith D. Palmer ~ Rotary Pulse Engines ~ -----Original Message----- From: owner-pulsar-list-server@matronics.com [mailto:owner-pulsar-list-server@matronics.com] On Behalf Of philb Sent: Friday, December 27, 2013 9:18 PM Subject: Pulsar-List: 582 prop and gearbox ratio r u using as i am thinking of getting a pulsar and would like to optimise prop gearbox ratio for perfrmance so was wondering what u are all using prop wise diam and pitch gearbox ratio static rpm climb rate one up take off roll one up approx and cruise speeds at say 5000 rpm 5600 and flat out it could even become a sticky phil Read this topic online here: http://forums.matronics.com/viewtopic.php?p=416244#416244 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pulsar-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pulsar-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pulsar-list Browse Digests http://www.matronics.com/digest/pulsar-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.