---------------------------------------------------------- Pulsar-List Digest Archive --- Total Messages Posted Wed 04/08/15: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 11:44 AM - Re: Pulsar 3 cowling needed (HUGH COULTER) 2. 11:56 AM - Re: Pulsar 3 cowling needed (Matt Brock) 3. 12:00 PM - Re: Pulsar 3 cowling needed (n3300p@gmail.com) 4. 03:01 PM - Re: Pulsar 3 cowling needed (alan sandul) 5. 06:46 PM - Pulsar reunion (GREGSMI@aol.com) ________________________________ Message 1 _____________________________________ Time: 11:44:04 AM PST US From: "HUGH COULTER" Subject: Re: Pulsar-List: Pulsar 3 cowling needed The series 3 can take a Jabaru 6 at 120 HP. Jabaru had a firewall forward kit for this engine. With this engine cruse speed will be about 190 MPH. Clarke On Tue, 7 Apr 2015 19:28:31 -0700 "Edfrommi" wrote: > > > Hello all, > I'm the proud new owner of a pulsar 3 that is about 20% >complete. Almost all the pieces are there but the >firewall forward kit is not. Its a tail wheel version and >I am favoring the Rotax 912ul. If anyone knows where I >can find any or all of these pieces please help me out! > Thanks in advance! > Ed > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=440417#440417 > > > > > > > >Un/Subscription, >Forums! >Admin. > > > ________________________________ Message 2 _____________________________________ Time: 11:56:07 AM PST US Subject: Re: Pulsar-List: Pulsar 3 cowling needed From: Matt Brock I have a manual for install of the rotax 914 turbo engine in this airframe. Let me know if you want it. 26 years of flying and there's no such thing as too much horsepower...... Regards, Matt. Original Message From: HUGH COULTER Sent: Wednesday, 8 April 2015 22:48 Reply To: pulsar-list@matronics.com Subject: Re: Pulsar-List: Pulsar 3 cowling needed The series 3 can take a Jabaru 6 at 120 HP. Jabaru had a firewall forward kit for this engine. With this engine cruse speed will be about 190 MPH. Clarke On Tue, 7 Apr 2015 19:28:31 -0700 "Edfrommi" wrote: > > > Hello all, > I'm the proud new owner of a pulsar 3 that is about 20% >complete. Almost all the pieces are there but the >firewall forward kit is not. Its a tail wheel version and >I am favoring the Rotax 912ul. If anyone knows where I >can find any or all of these pieces please help me out! > Thanks in advance! > Ed > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=440417#440417 > > > > > > > >Un/Subscription, >Forums! >Admin. > > > ________________________________ Message 3 _____________________________________ Time: 12:00:57 PM PST US From: n3300p@gmail.com Subject: Re: Pulsar-List: Pulsar 3 cowling needed I have a complete FWF kit for a Rotax 912 for a Series II Pulsar which I understand to be dimensionally the same as a Series III. It's been several years in storage but as I recall it includes two radiators, engine mount maybe oil cooler upper and lower cowls I also have a FWF for a 2200 Jabiru with corks and engine mount. Let me know if interested. n3300p@gmail.com Regards, Ned Thomas On Apr 7, 2015, at 9:28 PM, Edfrommi wrote: Hello all, I'm the proud new owner of a pulsar 3 that is about 20% complete. Almost all the pieces are there but the firewall forward kit is not. Its a tail wheel version and I am favoring the Rotax 912ul. If anyone knows where I can find any or all of these pieces please help me out! Thanks in advance! Ed Read this topic online here: http://forums.matronics.com/viewtopic.php?p=440417#440417 ________________________________ Message 4 _____________________________________ Time: 03:01:20 PM PST US From: alan sandul Subject: Re: Pulsar-List: Pulsar 3 cowling needed Ed,I have a PulsarIII that I purchased built but with only 96hrs on it and the manual is for Pulsar II-III as they were just changing to the III serie s.It would appear that engine mounting for the 912 would be the same for bo th. The manual shows the engine being the 912 turbo. Your welcome to any in fo out of the manual you may need.I have never seen a Jabiru in the Pulsar personally but I would do some research on the Jabiru before I would purcha se. There have been some strange issues with the engines. =C2-Sounds like Ned has everything you may need.The Pulsar I bought was not completed prop erly and it took me 3 years of part time work to get it completed properly. Any questions you may have I would be happy to offer any advice I can. Fuel tank leakage has been a curse.Good luck,Alan On Wednesday, April 8, 2015 3:07 PM, "n3300p@gmail.com" wrote: I have a complete FWF kit for a Rotax 912 for a Series II Pulsar which I un derstand to be dimensionally the same as a Series III. It's been several years in storage but as I recall it includes two radiator s, engine mount maybe oil cooler upper and lower cowls I also have a FWF for a 2200 Jabiru with corks and engine mount. Let me know if interested. n3300p@gmail.com Regards, Ned Thomas On Apr 7, 2015, at 9:28 PM, Edfrommi wrote: Hello all, I'm the proud new owner of a pulsar 3 that is about 20% complete. Almost al l the pieces are there but the firewall forward kit is not. Its a tail whee l version and I am favoring the Rotax 912ul. If anyone knows where I can fi nd any or all of these pieces please help me out!=C2- Thanks in advance! Ed Read this topic online here: http://forums.matronics.com/viewtopic.php?p=440417#440417 S - - =C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin. ________________________________ Message 5 _____________________________________ Time: 06:46:27 PM PST US From: GREGSMI@aol.com Subject: Pulsar-List: Pulsar reunion We are continuing with plans for the Pulsar gathering May 28 - 31. The registration is disappointing, but we are going to have a great party so please get your registration into me quickly. Unfortunately, the numbers do not justify bringing in Dean Vogel for Rotax. There is no way we can pay his expenses, but we will have plenty of expertise to answer your questions and many aircraft to show. Looking forward to seeing everyone. Greg ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pulsar-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pulsar-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pulsar-list Browse Digests http://www.matronics.com/digest/pulsar-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.