---------------------------------------------------------- Pulsar-List Digest Archive --- Total Messages Posted Thu 01/09/20: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:13 AM - Re: Wing Skin Advice Needed (Yellowhammer) 2. 01:57 PM - Re: Re: Wing Skin Advice Needed (Sonja Englert) 3. 04:26 PM - Re: Re: Wing Skin Advice Needed (Greg Smith) 4. 08:34 PM - Re: Wing Skin Advice Needed (Yellowhammer) 5. 08:34 PM - Re: Wing Skin Advice Needed (Yellowhammer) ________________________________ Message 1 _____________________________________ Time: 09:13:31 AM PST US Subject: Pulsar-List: Re: Wing Skin Advice Needed From: "Yellowhammer" Sonja, On leading edge rib number 3, there is approximately 3 to 4 inches on the bottom side that did not bond. On leading edge rib number 4 there is approximately 2 to 3 inches on bottom that did not adhere properly. Hope this help. Thank you for your wisdom! Sincerely and Respectfully,' Clyde -------- J.M. Oyler "Clyde" Read this topic online here: http://forums.matronics.com/viewtopic.php?p=494208#494208 ________________________________ Message 2 _____________________________________ Time: 01:57:11 PM PST US From: Sonja Englert Subject: Re: Pulsar-List: Re: Wing Skin Advice Needed I would not worry about it and just leave it as is. Sonja On Thu, Jan 9, 2020 at 9:15 AM Yellowhammer wrote: > > Sonja, > > On leading edge rib number 3, there is approximately 3 to 4 inches on the > bottom side that did not bond. On leading edge rib number 4 there is > approximately 2 to 3 inches on bottom that did not adhere properly. > > Hope this help. Thank you for your wisdom! > > Sincerely and Respectfully,' > > Clyde > > -------- > J.M. Oyler "Clyde" > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=494208#494208 > > ________________________________ Message 3 _____________________________________ Time: 04:26:10 PM PST US From: Greg Smith Subject: Re: Pulsar-List: Re: Wing Skin Advice Needed Sonya, the high load area of the wing is inboard. What part of that load is placed on the leading edge? Also, since is is not formed to the rib, what impact will that have? Greg -----Original Message----- From: Sonja Englert Sent: Thu, Jan 9, 2020 3:57 pm Subject: Re: Pulsar-List: Re: Wing Skin Advice Needed I would not worry about it and just leave it as is. Sonja On Thu, Jan 9, 2020 at 9:15 AM Yellowhammer wrote: Sonja, On=C2- leading edge rib number 3, there is approximately 3 to 4 inches on the bottom side that did not bond. On leading edge rib number 4 there is a pproximately 2 to 3 inches on bottom that did not adhere properly. Hope this help. Thank you for your wisdom! Sincerely and Respectfully,' Clyde -------- J.M. Oyler "Clyde" Read this topic online here: http://forums.matronics.com/viewtopic.php?p=494208#494208 br>fts!) r>>rel="noreferrer" target="_blank">http://www.matronics.com/contributi on =C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin. ar-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navi gator?Pulsar-List FORUMS - eferrer" target="_blank">http://forums.matronics.com WIKI - errer" target="_blank">http://wiki.matronics.com b Site - =C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin. rel="noreferrer" target="_blank">http://www.matronics.com/contribution ________________________________ Message 4 _____________________________________ Time: 08:34:20 PM PST US Subject: Pulsar-List: Re: Wing Skin Advice Needed From: "Yellowhammer" Sonja, Thanks for the input. I will upload a picture just to be on the safe side. That way you and Mr. Greg can see the exact location. Thanks so much! Clyde -------- J.M. Oyler "Clyde" Read this topic online here: http://forums.matronics.com/viewtopic.php?p=494212#494212 ________________________________ Message 5 _____________________________________ Time: 08:34:58 PM PST US Subject: Pulsar-List: Re: Wing Skin Advice Needed From: "Yellowhammer" Sonja, Thanks for the input. I will upload a picture just to be on the safe side. That way you and Mr. Greg can see the exact location. Thanks so much! Clyde -------- J.M. Oyler "Clyde" Read this topic online here: http://forums.matronics.com/viewtopic.php?p=494213#494213 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pulsar-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pulsar-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pulsar-list Browse Digests http://www.matronics.com/digest/pulsar-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.