---------------------------------------------------------- Rocket-List Digest Archive --- Total Messages Posted Tue 06/03/03: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:24 PM - Re: RV-List: Air Reamer? Not drill anymore (John Starn) ________________________________ Message 1 _____________________________________ Time: 05:24:03 PM PST US From: "John Starn" Subject: Rocket-List: Re: RV-List: Air Reamer? Not drill anymore --> Rocket-List message posted by: "John Starn" Dang, does that mean that IF you buy a QB, have someone build the wings and tail, install the completed & wired panel, buy the seats, get it painted at a shop and have a person test fly off all the time, take you and the plane go to OSH and win an award for YOUR homebuilt. YEP, seen it done. Ya'll don't have to know how to rivet, drill, cut, fit, paint etc as long as you can write checks. Guess I'll just get have to get started on mining more aluminum ore so I can "build" an RV-10. Should be able to get the -10 in the air quicker than 5 years. But then flying is what it's all about. Do Not Archive KABONG (GBA) ----- Original Message ----- From: "Dana Overall" > >That's not fair, Dana. Not fair at all. Can't wait for the pre punched, > >pre drilled, match drilled, pre formed, pre cut, pre fabbed -10 to come > >out. > > You are right Paul but you are leaving out one very important > point..........your vision of fair will fly out the window when you cleco > the 10 VS together right out of the box!! Like the old commercial, "did you > bake that yourself.........no "It's shake and bake"."