---------------------------------------------------------- Rocket-List Digest Archive --- Total Messages Posted Sun 11/02/03: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:08 AM - Photos (f1rocket@telus.net) 2. 06:26 AM - Fuel servo plumbing, HR II (Jim Stone) 3. 06:43 AM - Re: Fuel servo plumbing, HR II (Tom Martin) 4. 11:15 AM - Re: Fuel servo plumbing, HR II (Hr2pilot@aol.com) ________________________________ Message 1 _____________________________________ Time: 01:08:13 AM PST US From: f1rocket@telus.net Subject: Rocket-List: Photos --> Rocket-List message posted by: f1rocket@telus.net Hi all, I'm playing with setting up a Rocket web page (well it also has a Stits Playboy on it, but that's because I just finished a re-build), and I'm looking for pictures to put on the web site. If any of you have photos you would like to donate to the web page please e- mail them to me, with any information you know about them. Thanks, Jeff ________________________________ Message 2 _____________________________________ Time: 06:26:40 AM PST US From: "Jim Stone" Subject: Rocket-List: Fuel servo plumbing, HR II --> Rocket-List message posted by: "Jim Stone" My Bendix fuel servo came configured with the fuel-in fitting located on the bottom side of the servo, does anyone know if this will create a clearance problem with the lower cowl surface? Harmon Rocket II. Jim ________________________________ Message 3 _____________________________________ Time: 06:43:32 AM PST US From: "Tom Martin" Subject: RE: Rocket-List: Fuel servo plumbing, HR II --> Rocket-List message posted by: "Tom Martin" Jim There are a couple of different ways you can have the fuel enter the servo, give me a call at 519-631-1369 or cell at 519-281-1369 Tom Martin -----Original Message----- From: owner-rocket-list-server@matronics.com [mailto:owner-rocket-list-server@matronics.com]On Behalf Of Jim Stone Subject: Rocket-List: Fuel servo plumbing, HR II --> Rocket-List message posted by: "Jim Stone" My Bendix fuel servo came configured with the fuel-in fitting located on the bottom side of the servo, does anyone know if this will create a clearance problem with the lower cowl surface? Harmon Rocket II. Jim ________________________________ Message 4 _____________________________________ Time: 11:15:41 AM PST US From: Hr2pilot@aol.com Subject: Re: Rocket-List: Fuel servo plumbing, HR II BAYES_99 (3.0 points) BODY": Bayesian.classifier.says.spam.probability.is.99.to.100@[score:0.9934] --> Rocket-List message posted by: Hr2pilot@aol.com Chang it to the top. John