---------------------------------------------------------- Rocket-List Digest Archive --- Total Messages Posted Thu 11/06/03: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:27 AM - Instruments for Sale (Lenleg@aol.com) 2. 07:17 AM - flywheel and starter gear ring source (Jim Stone) 3. 07:56 AM - flywheel and starter gear ring source (Lincoln Schlecht) 4. 08:36 AM - Re: flywheel and starter gear ring source (Tom Gummo) 5. 11:39 AM - Re: flywheel and starter gear ring source (Loren Harmon) 6. 01:41 PM - Re: Polishing Canopy and scratch removal Question (David.vonLinsowe) ________________________________ Message 1 _____________________________________ Time: 05:27:11 AM PST US From: Lenleg@aol.com Subject: Rocket-List: Instruments for Sale beech-list@matronics.com, cessna-list@matronics.com, homebuilt-list@matronics.com, kr-list@matronics.com, piper-list@matronics.com, warbird-list@matronics.com --> Rocket-List message posted by: Lenleg@aol.com I have the following for sale: RC Allen Electric Attitude Indicator, 14V, 8 degree tilt, 75hrs RC Allen Electric Directional Gyro, 14V, 150 hrs Both instruments are still in my RV-8A panel and flying. Have been flying the instruments 1 year. Working perfectly. Each list for $1895. Make offer direct to: lenleg@aol.com Len Leggette, RV-8A Greensboro, NC N910LL ________________________________ Message 2 _____________________________________ Time: 07:17:16 AM PST US From: "Jim Stone" Subject: Rocket-List: flywheel and starter gear ring source --> Rocket-List message posted by: "Jim Stone" Does anyone know of a good source for new or used flywheel and starter rings. Don George in MCO has them made and sells them "new" for 350.00. Progressive Air Services offers a "new Superior" brand unit for 417.67. Both will do the job, just didn't want to pay so much for one. Any comments welcomed. Jim Stone HRII ________________________________ Message 3 _____________________________________ Time: 07:56:30 AM PST US From: "Lincoln Schlecht" Subject: Rocket-List: flywheel and starter gear ring source --> Rocket-List message posted by: "Lincoln Schlecht" "Does anyone know of a good source for new or used flywheel and starter rings." ============================ Sure - Arkansas Air Parts, Air Salvage of Dallas, Wentworth Aircraft Salvage, Etc. etc. There are two different tooth counts, two or three different alternator pulley diameters, and some have 5/8" holes for 5/8" prop lugs, and some are 3/4". Also, some have terminals for electric prop deicing. There are lots and lots of combinations. Also check e-bay. ________________________________ Message 4 _____________________________________ Time: 08:36:11 AM PST US From: "Tom Gummo" Subject: Re: Rocket-List: flywheel and starter gear ring source --> Rocket-List message posted by: "Tom Gummo" Try this web site. It has aircraft salvage shops all over the country. http://www.pilotshack.com/ACSalvage.html Tom Gummo Apple Valley, CA Harmon Rocket-II do not archive http://mysite.verizon.net/t.gummo/index.html ----- Original Message ----- From: "Jim Stone" Subject: Rocket-List: flywheel and starter gear ring source > --> Rocket-List message posted by: "Jim Stone" > > Does anyone know of a good source for new or used flywheel and starter > rings. Don George in MCO has them made and sells them "new" for 350.00. > Progressive Air Services offers a "new Superior" brand unit for 417.67. > Both will do the job, just didn't want to pay so much for one. Any > comments welcomed. > > Jim Stone > > HRII > > ________________________________ Message 5 _____________________________________ Time: 11:39:06 AM PST US From: "Loren Harmon" Subject: RE: Rocket-List: flywheel and starter gear ring source --> Rocket-List message posted by: "Loren Harmon" I believe that the guy who makes them for Don George is Dick Waters. His phone number is 800 366-4746. I don't know how much he gets for them, but he provided a new one with a used engine I bought from him. Loren Harmon s/n 76 -----Original Message----- From: owner-rocket-list-server@matronics.com [mailto:owner-rocket-list-server@matronics.com] On Behalf Of Jim Stone Subject: Rocket-List: flywheel and starter gear ring source --> Rocket-List message posted by: "Jim Stone" Does anyone know of a good source for new or used flywheel and starter rings. Don George in MCO has them made and sells them "new" for 350.00. Progressive Air Services offers a "new Superior" brand unit for 417.67. Both will do the job, just didn't want to pay so much for one. Any comments welcomed. Jim Stone HRII = == == == == ________________________________ Message 6 _____________________________________ Time: 01:41:21 PM PST US Subject: Rocket-List: RE: Polishing Canopy and scratch removal Question From: "David.vonLinsowe" --> Rocket-List message posted by: "David.vonLinsowe" From experience I had with a Pitts canopy I would highly recommend the Micro Mesh system then finish off with Finish 2001 in the bright green and orange bottle. I went from sanding with 320 wet-or-dry all through Micro Mesh's steps. It turned out nice, but the Finish 2001 really did the trick. I use the Finish 2001 all the time on the RV canopy for cleaning and de-hazing and I haven't found anything that works as well! It does polish, but I also think it somehow fills small scratches so they can't be seen at all. It makes the Plexiglas invisible. The problem I have now is nose prints on the canopy. People can't tell where the canopy is so they run into it with their nose... Dave stepsFrom: P M Condon Subject: Rocket-List: Polishing Canopy and scratch removal Question --> Rocket-List message posted by: P M Condon What have RV-ers been using to polish canopies? I have been using Plexus with good results as a cleaner/polisher. I need to polish out some micro fine scratches so I am wondering what others are using to do this? At the AOPA convention this weekend I purchased a Flitz polishing kit.....I am not thrilled with the results on plastic. I realize that micro-mesh and other similar companies have a product...I am wondering what else is out there that polishes out micro scratches and all that. There are canopies on RV's at Oshkosh that look like Todd just took them out of the mold-there so clean and scratch free... **************************************************************************************** Note: The information contained in this message may be privileged and confidential and thus protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. ****************************************************************************************