---------------------------------------------------------- Rocket-List Digest Archive --- Total Messages Posted Thu 12/11/03: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:31 AM - Heat Muff (Jim Stone) 2. 06:51 AM - Re: Heat Muff (Wernerworld) 3. 07:14 AM - Re: Heat Muff (Hr2pilot@aol.com) 4. 07:29 AM - Re: Heat Muff (Jim Stone) 5. 09:24 AM - Re: Heat Muff (Jim Stone) 6. 11:34 AM - Re: Heat Muff (Scot Stambaugh) ________________________________ Message 1 _____________________________________ Time: 06:31:07 AM PST US From: "Jim Stone" Subject: Rocket-List: Heat Muff --> Rocket-List message posted by: "Jim Stone" Does anyone have a source for a heat muff with 2 inch intake, exhaust and end fittings. Everywhere I=92ve looked the end fittings are 1 =BE inches. Thanks, Jim ________________________________ Message 2 _____________________________________ Time: 06:51:33 AM PST US From: "Wernerworld" Subject: Re: Rocket-List: Heat Muff --> Rocket-List message posted by: "Wernerworld" Jim, Not sure, but I'll bet Larry Vetterman could make you one. Russ ----- Original Message ----- From: "Jim Stone" Subject: Rocket-List: Heat Muff > --> Rocket-List message posted by: "Jim Stone" > > Does anyone have a source for a heat muff with 2 inch intake, exhaust > and end fittings. Everywhere I=92ve looked the end fittings are 1 =BE > inches. > > Thanks, > > Jim > > ________________________________ Message 3 _____________________________________ Time: 07:14:23 AM PST US From: Hr2pilot@aol.com Subject: Re: Rocket-List: Heat Muff --> Rocket-List message posted by: Hr2pilot@aol.com Did you look on the Harmon Rocket web site? John ________________________________ Message 4 _____________________________________ Time: 07:29:02 AM PST US From: "Jim Stone" Subject: RE: Rocket-List: Heat Muff --> Rocket-List message posted by: "Jim Stone" For some reason my dimensions of the tubing got changed. I am looking for 2 inch opening for intake, exhaust and both end seals. Jim -----Original Message----- From: owner-rocket-list-server@matronics.com [mailto:owner-rocket-list-server@matronics.com] On Behalf Of Jim Stone Subject: Rocket-List: Heat Muff --> Rocket-List message posted by: "Jim Stone" Does anyone have a source for a heat muff with 2 inch intake, exhaust and end fittings. Everywhere I=92ve looked the end fittings are 1 =BE inches. Thanks, Jim = == == == == ________________________________ Message 5 _____________________________________ Time: 09:24:45 AM PST US From: "Jim Stone" Subject: RE: Rocket-List: Heat Muff --> Rocket-List message posted by: "Jim Stone" Just did, thanks John. -----Original Message----- From: owner-rocket-list-server@matronics.com [mailto:owner-rocket-list-server@matronics.com] On Behalf Of Hr2pilot@aol.com Subject: Re: Rocket-List: Heat Muff --> Rocket-List message posted by: Hr2pilot@aol.com Did you look on the Harmon Rocket web site? John = == == == == ________________________________ Message 6 _____________________________________ Time: 11:34:12 AM PST US From: Scot Stambaugh Subject: RE: Rocket-List: Heat Muff --> Rocket-List message posted by: Scot Stambaugh Take a look at the attached document. I have a set of these and will adapt it to my curved exhaust tube. scot At 12:24 PM 12/11/2003 -0500, you wrote: >--> Rocket-List message posted by: "Jim Stone" > >Just did, thanks John. > >-----Original Message----- >From: owner-rocket-list-server@matronics.com >[mailto:owner-rocket-list-server@matronics.com] On Behalf Of >Hr2pilot@aol.com >To: rocket-list@matronics.com >Subject: Re: Rocket-List: Heat Muff > >--> Rocket-List message posted by: Hr2pilot@aol.com > >Did you look on the Harmon Rocket web site? >John > > >>== >== >== >== > >