---------------------------------------------------------- Rocket-List Digest Archive --- Total Messages Posted Thu 04/01/04: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:59 PM - Re: RV-List: Finish Drill / Deburr Pre-punched holes? (JOHN STARN) ________________________________ Message 1 _____________________________________ Time: 12:59:22 PM PST US From: "JOHN STARN" Subject: Rocket-List: Re: RV-List: Finish Drill / Deburr Pre-punched holes? --> Rocket-List message posted by: "JOHN STARN" WARNING....deleate now..... HUMOR AHEAD. Vel at leets eye B a no'en dat ya gots vot I cent ya'll. HRII wings abe'en shorter butt wit da same # of ribs, jest closr ta'gether. Gotta git back to pump re-build and paint prep. KABONG Please Do Not Archive. 8*) (GBA) ----- Original Message ----- From: "C. Rabaut" Subject: Re: RV-List: Finish Drill / Deburr Pre-punched holes? > As always, you could not be more wrong! By God, my RV-4 came > "pre-punched" and fit together so well I didn't even need a jig to assemble > the fuselage. I just bent the panels, held the bulk heads, and riveted > away. Hecka Doodle... those "Rockets" you guys built are nuthin' but a QB > RV-4; why even the wings just snap together and they're even shorter in > length than the 4 so they don't take but about half as long to rivet. > > Judging from your emails, your construction standards are obviously quit > low. And while we're on the subject of lousy craftsmanship.... that piece > o' cr@p radio you sent me doesn't even work!!! > > Chuck