----------------------------------------------------------
                           Rocket-List Digest Archive
                                      ---
                     Total Messages Posted Fri 05/21/04: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 11:15 AM - Re: Fuel pump  (Wernerworld)
     2. 01:04 PM - Fuel probes  (Jeff)
 
 
 
________________________________  Message 1  _____________________________________


Time: 11:15:45 AM PST US
From: "Wernerworld" <russ@wernerworld.com>
Subject: Re: Rocket-List: Fuel pump

--> Rocket-List message posted by: "Wernerworld" <russ@wernerworld.com>

Harry,

Did you prime yours when it was new or did it fail prematurely anyway?

Russ Werner


----- Original Message ----- 
From: "Harry Paine" <hpaine@earthlink.net>
Subject: Re: Rocket-List: Fuel pump


> --> Rocket-List message posted by: Harry Paine <hpaine@earthlink.net>
>
> At 10:24 AM 5/16/04 -0700, you wrote:
> >--> Rocket-List message posted by: "Bryan Carr" <b.m.carr@telus.net>
> >
> >Has anyone had trouble with the Dukes electric fuel pump that John sells
> >for the Rocket?
> >I have about 85 hours on my HR 11 and the pump is dripping out the
> >overflow tube after shutdown.
> >Can the seal be changed easily or do I have to get the pump overhauled?
> >Bryan Carr
>
> Bryan:
>
> Mine started leaking at about 150 HRS. The seal is about $75,00 US and
John
> used to sell it. It doesn't like to run dry
> even for 15 seconds so if possible prime the pump.
>
> Harry Paine
> 266HP
>
>






________________________________  Message 2  _____________________________________


Time: 01:04:32 PM PST US
From: "Jeff" <F1Rocket@telus.net>
Subject: Rocket-List: Fuel probes

--> Rocket-List message posted by: "Jeff" <F1Rocket@telus.net>

Hi all,

 Can anyone tell me the name of the probes used in the rockets?  Mine is kit 119
if it makes any difference.  Mark is away for a few days and can't answer.

I'm putting an ACS monitor in and they are asking for the manufactures name.

Thanks,
Jeff