---------------------------------------------------------- Rocket-List Digest Archive --- Total Messages Posted Fri 07/23/04: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:48 AM - Tach and T&B for sale (Jim Anglin) 2. 10:13 AM - oil cooler opening (Frazier, Vincent A) 3. 05:04 PM - Re: oil cooler opening (Jones15183@aol.com) ________________________________ Message 1 _____________________________________ Time: 08:48:01 AM PST US From: "Jim Anglin" Subject: Rocket-List: Tach and T&B for sale --> Rocket-List message posted by: "Jim Anglin" You can see these on ebay after 6 tonight. Do a search. Jim ________________________________ Message 2 _____________________________________ Time: 10:13:42 AM PST US Subject: Rocket-List: oil cooler opening From: "Frazier, Vincent A" --> Rocket-List message posted by: "Frazier, Vincent A" Gents, I've not had any luck finding out how many square inches I need for the opening to the Positech oil cooler. Anyone with a successful installation care to comment? Right now, I've got about 11 sq in opening into a small plenum above the cooler, which is angled back at about 45 degrees to the rear baffle. Any comments are welcome. Vince Frazier 3965 Caborn Road Mount Vernon, IN 47620 812-464-1839 work 812-985-7309 home F-1H Rocket, N540VF http://www.usi.edu/science/chemistry/vfrazier/page1.html ________________________________ Message 3 _____________________________________ Time: 05:04:05 PM PST US From: Jones15183@aol.com Subject: Re: Rocket-List: oil cooler opening --> Rocket-List message posted by: Jones15183@aol.com Vince I have a 5 inch opening in baffle in back of # 5 cyl going to a posotech oil cooler. I think these engines need all the cooling they can get, to keep oil levels below 200" F in Texas heat...billy