----------------------------------------------------------
                           Rocket-List Digest Archive
                                      ---
                     Total Messages Posted Wed 10/13/04: 4
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 03:36 PM - Capacative Fuel senders.  (blairclan)
     2. 04:27 PM - engine control cables  (Larry James)
     3. 04:51 PM - Re: engine control cables  (Dan Checkoway)
     4. 05:38 PM - Re: engine control cables  (Hr2pilot@aol.com)
 
 
 
________________________________  Message 1  _____________________________________


Time: 03:36:51 PM PST US
From: "blairclan" <blairclan@bigpond.com>
Subject: Rocket-List: Capacative Fuel senders.

--> Rocket-List message posted by: "blairclan" <blairclan@bigpond.com>

I seem to remember some talk on this recently but can't find the answer
yet!

I'm putting Vans capacitive senders in the large HR2 tanks.

Can anyone advise which ribs they should go on , does it matter?

Thanks

Tony Blair






________________________________  Message 2  _____________________________________


Time: 04:27:54 PM PST US
From: "Larry James" <larry@ncproto.com>
Subject: Rocket-List: engine control cables

--> Rocket-List message posted by: "Larry James" <larry@ncproto.com>

Can anyone tell me the brand, style, length, and where to buy the three
control cables for the motor (throttle, prop, and mixture) ???  The only
place I've seen these cables penetrate the firewall is on the left; outboard
of the vertical aluminum angle connecting the motor mount brkts just inside
of the skin.  What is the vertical placement ??  Are there other / better
places to penetrate ??
thanks,
Larry E. James
Bellevue,  WA  HR2  fuselage






________________________________  Message 3  _____________________________________


Time: 04:51:51 PM PST US
From: "Dan Checkoway" <dan@rvproject.com>
Subject: Re: Rocket-List: engine control cables

--> Rocket-List message posted by: "Dan Checkoway" <dan@rvproject.com>

I bought my custom cables from Van's, but next time I'll probably order 'em
from http://www.cablecraft.com.  I've been told they can build you custom
cables with custom throws -- the ones I have from Van's have limited throws.

Hope this helps,
)_( Dan
RV-7 N714D
http://www.rvproject.com

----- Original Message ----- 
From: "Larry James" <larry@ncproto.com>
Subject: Rocket-List: engine control cables


> --> Rocket-List message posted by: "Larry James" <larry@ncproto.com>
>
> Can anyone tell me the brand, style, length, and where to buy the three
> control cables for the motor (throttle, prop, and mixture) ???  The only
> place I've seen these cables penetrate the firewall is on the left;
outboard
> of the vertical aluminum angle connecting the motor mount brkts just
inside
> of the skin.  What is the vertical placement ??  Are there other / better
> places to penetrate ??
> thanks,
> Larry E. James
> Bellevue,  WA  HR2  fuselage
>
>






________________________________  Message 4  _____________________________________


Time: 05:38:36 PM PST US
From: Hr2pilot@aol.com
Subject: Re: Rocket-List: engine control cables

--> Rocket-List message posted by: Hr2pilot@aol.com

I used the ACS A920 cables Mix 60"
                                         Thro 60" 
                                         prop 66"