Today's Message Index:
----------------------
1. 05:28 AM - Re: engine control cables (Loren Harmon)
2. 07:01 AM - engine control cables (Frazier, Vincent A)
3. 08:13 AM - Re: engine control cables (Wernerworld)
4. 08:35 AM - Capacitance fuel senders (Chris Fordham)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | engine control cables |
--> Rocket-List message posted by: "Loren Harmon" <landsharmon@tc3net.com>
I bought mine from Mark. He had them in stock.
Loren Harmon
F1 s/n 76
Can anyone tell me the brand, style, length, and where to buy the three
control cables for the motor (throttle, prop, and mixture) ??? The only
place I've seen these cables penetrate the firewall is on the left;
outboard
of the vertical aluminum angle connecting the motor mount brkts just
inside
of the skin. What is the vertical placement ?? Are there other /
better
places to penetrate ??
thanks,
Larry E. James
Bellevue, WA HR2 fuselage
==
==
==
==
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | engine control cables |
--> Rocket-List message posted by: "Frazier, Vincent A" <VFrazier@usi.edu>
***********Time: 04:27:54 PM PST US
From: "Larry James" <larry@ncproto.com>
Subject: Rocket-List: engine control cables
--> Rocket-List message posted by: "Larry James" <larry@ncproto.com>
Can anyone tell me the brand, style, length, and where to buy the three
control cables for the motor (throttle, prop, and mixture) ??? The only
place I've seen these cables penetrate the firewall is on the left;
outboard of the vertical aluminum angle connecting the motor mount brkts
just inside of the skin. What is the vertical placement ?? Are there
other / better places to penetrate ??
thanks,
Larry E. James
Bellevue, WA HR2 fuselage***********
Larry,
I used the ACS A-920 cables. I think I used a 60", 63" and a 66"
Regardless of what everyone else uses, you need to measure for yourself!
Your routing might be different than ours.
http://www.usi.edu/science/chemistry/vfrazier/Engine%20and%20Prop.htm
several decent pictures on here if you haven't browsed this page yet.
Vince
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: engine control cables |
--> Rocket-List message posted by: "Wernerworld" <russ@wernerworld.com>
Larry,
I also used the ones from Spruce, except I think I got the prop cable from
Mark. Prop is 66" and the others are 60". I also used a couple of the
little devices that Spruce sells that extend the cable an inch or two. I
modified those to get exactly what I needed on the mixture and the throttle.
The prop cable was fitted at it's actual length.
One thing to watch (I didn't) is that if you want to route your cowl hinge
pins through the firewall, make sure you don't run a cable through a point
directly aft of the hinge eyes.
I will also email you direct a photo of a bracket for the prop cable that
works perfectly and a photo of my cable routing.
Russ
Rocket 99
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Capacitance fuel senders |
0.23 FIND_ANYTHING BODY: Find out anything
--> Rocket-List message posted by: "Chris Fordham" <consult@island.net>
Hi Tony
I made the same inquiry here a couple of weeks ago, without much response.
I asked the same question on the aeroeletric list this morning and will
keep you posted if I find out anything,
Chris
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|