---------------------------------------------------------- Rocket-List Digest Archive --- Total Messages Posted Tue 12/21/04: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:57 AM - Propeller contol (Jeff) 2. 07:51 AM - Re: Propeller contol (Wernerworld) 3. 08:02 AM - Re: Propeller contol (Fred Weaver) 4. 09:39 AM - Re: Fw: LIST OF ROCKETS FLYING IN SO CAL (Morocketman@aol.com) ________________________________ Message 1 _____________________________________ Time: 06:57:06 AM PST US From: "Jeff" Subject: Rocket-List: Propeller contol --> Rocket-List message posted by: "Jeff" Hi all, Just hooked up my Jihostroj prop governor with a Vans throttle quadrant. I can get full forward (fine pitch) no problem (adjusted for this), but when I pull the prop control back, it doesn't come all the way back on the prop governor (about 1/4" short). Should I drill another hole and get full stroke on the governor, or do we ever pull it all the way coarse? Jeff ________________________________ Message 2 _____________________________________ Time: 07:51:28 AM PST US From: "Wernerworld" Subject: Re: Rocket-List: Propeller contol --> Rocket-List message posted by: "Wernerworld" It will work fine just like that. Press on! Russ HRII ----- Original Message ----- From: "Jeff" Subject: Rocket-List: Propeller contol > --> Rocket-List message posted by: "Jeff" > > Hi all, > > Just hooked up my Jihostroj prop governor with a Vans throttle quadrant. > I can get full forward (fine pitch) no problem (adjusted for this), but > when I pull the prop control back, it doesn't come all the way back on the > prop governor (about 1/4" short). > > Should I drill another hole and get full stroke on the governor, or do we > ever pull it all the way coarse? > > Jeff > > > ________________________________ Message 3 _____________________________________ Time: 08:02:09 AM PST US From: "Fred Weaver" Subject: Re: Rocket-List: Propeller contol --> Rocket-List message posted by: "Fred Weaver" Jeff.... Just fly it that way first... You will probably never use the govenor to get to full coarse pitch. Typically, you will certainly use the fine pitch portion of the curve and you would be surprised (at least I was) at how little rotation the governor arm has to make to increase the pitch of the blades... Just fly it and then adjust for what you might need. Weav ----- Original Message ----- From: "Jeff" Subject: Rocket-List: Propeller contol > --> Rocket-List message posted by: "Jeff" > > Hi all, > > Just hooked up my Jihostroj prop governor with a Vans throttle quadrant. I can get full forward (fine pitch) no problem (adjusted for this), but when I pull the prop control back, it doesn't come all the way back on the prop governor (about 1/4" short). > > Should I drill another hole and get full stroke on the governor, or do we ever pull it all the way coarse? > > Jeff > > ________________________________ Message 4 _____________________________________ Time: 09:39:40 AM PST US From: Morocketman@aol.com Subject: Re: Rocket-List: Fwd: LIST OF ROCKETS FLYING IN SO CAL --> Rocket-List message posted by: Morocketman@aol.com Likewise, why don't we have a list of all the "Rocketeers" (who want to be on it) distributed. I for one would very much enjoy any Rocket Pilots, or RV'ers to fly into Rebel's Bluff for a visit. You can come and stay, or........ just grab lunch and a fillup of the least expensive fuel anywhere. You are welcome! Just ask Harry Paine, Vince Frazier, or Paul Rosales. Rebel's Bluff is 2 miles north of Mt Vernon (MISSOURI) International Airport. N37 06.1 and W93 52.2. I will hangar your airplane and treat you to the finest Ozarks Hospitality. Let's get together and share our passion for the Rocket Ride, or better yet, do as Harry and I did, and fly a Rocket vacation together. Les Featherston 417-466-4663 or _morocketman@aol.com_ (mailto:morocketman@aol.com)