----------------------------------------------------------
                           Rocket-List Digest Archive
                                      ---
                     Total Messages Posted Tue 05/24/05: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 04:27 PM - Engines-List: Jihostroj prop governors   (LesDrag@aol.com)
     2. 07:16 PM - Re: Engines-List: Jihostroj prop governors   (Dan Checkoway)
     3. 10:52 PM - Re: Engines-List: Jihostroj prop governors   (Ron Carter)
 
 
 
________________________________  Message 1  _____________________________________


Time: 04:27:22 PM PST US
From: LesDrag@aol.com
Subject: Rocket-List: Engines-List: Jihostroj prop governors 

--> Rocket-List message posted by: LesDrag@aol.com

Anyone on the Rocket list have a comment for Gary Casey?

Regards,
Jim Ayers

Subj: Engines-List: Jihostroj prop governors   Date: 05/24/2005 10:27:10 AM 
Pacific Daylight Time  From: _glcasey@adelphia.net_ 
(mailto:glcasey@adelphia.net)   Reply-to: _engines-list@matronics.com_ 
(mailto:engines-list@matronics.com)   To: _engines-list@matronics.com_ (mailto:engines-list@matronics.com)   
Sent from the Internet _(Details)_ (aolmsg://03ad00f0/inethdr/2) 


--> Engines-List message posted by: "Gary Casey"  <glcasey@adelphia.net>

I'm curious if anyone has any experience  with these prop governors.  I've
got one installed on my IO-540, but  haven't yet run it.  It has the
advantage of being a few pounds lighter  than the standard one and is 2
inches shorter, improving my inlet ducting a  lot.

Gary Casey






________________________________  Message 2  _____________________________________


Time: 07:16:48 PM PST US
From: "Dan Checkoway" <dan@rvproject.com>
Subject: Re: Rocket-List: Engines-List: Jihostroj prop governors 

--> Rocket-List message posted by: "Dan Checkoway" <dan@rvproject.com>

Ditto Gary's comments about the Jihostroj being lighter and more compact
than others such as the McCauley.  Been running one for almost 500 hours on
my IO-360 RV-7.  No complaints!

That said, it's one of the few components on my plane which require *metric*
tools...

do not archive
)_( Dan
RV-7 N714D
http://www.rvproject.com

----- Original Message ----- 
From: <LesDrag@aol.com>
Subject: Rocket-List: Engines-List: Jihostroj prop governors


> --> Rocket-List message posted by: LesDrag@aol.com
>
> Anyone on the Rocket list have a comment for Gary Casey?
>
> Regards,
> Jim Ayers
>
> Subj: Engines-List: Jihostroj prop governors   Date: 05/24/2005 10:27:10
AM
> Pacific Daylight Time  From: _glcasey@adelphia.net_
> (mailto:glcasey@adelphia.net)   Reply-to: _engines-list@matronics.com_
> (mailto:engines-list@matronics.com)   To: _engines-list@matronics.com_
(mailto:engines-list@matronics.com)
> Sent from the Internet _(Details)_ (aolmsg://03ad00f0/inethdr/2)
>
>
> --> Engines-List message posted by: "Gary Casey"  <glcasey@adelphia.net>
>
> I'm curious if anyone has any experience  with these prop governors.  I've
> got one installed on my IO-540, but  haven't yet run it.  It has the
> advantage of being a few pounds lighter  than the standard one and is 2
> inches shorter, improving my inlet ducting a  lot.
>
> Gary Casey
>
>






________________________________  Message 3  _____________________________________


Time: 10:52:40 PM PST US
From: "Ron Carter" <ronc@metropolisdesign.com>
Subject: Re: Rocket-List: Engines-List: Jihostroj prop governors 

--> Rocket-List message posted by: "Ron Carter" <ronc@metropolisdesign.com>

I think this is the unit Mark Frederick sells. I have one it works as
expected.
I have about 250 hours on the unit.
Ron Carter
N230RC

----- Original Message -----
From: <LesDrag@aol.com>
Subject: Rocket-List: Engines-List: Jihostroj prop governors


> --> Rocket-List message posted by: LesDrag@aol.com
>
> Anyone on the Rocket list have a comment for Gary Casey?
>
> Regards,
> Jim Ayers
>
> Subj: Engines-List: Jihostroj prop governors   Date: 05/24/2005 10:27:10
AM
> Pacific Daylight Time  From: _glcasey@adelphia.net_
> (mailto:glcasey@adelphia.net)   Reply-to: _engines-list@matronics.com_
> (mailto:engines-list@matronics.com)   To: _engines-list@matronics.com_
(mailto:engines-list@matronics.com)
> Sent from the Internet _(Details)_ (aolmsg://03ad00f0/inethdr/2)
>
>
> --> Engines-List message posted by: "Gary Casey"  <glcasey@adelphia.net>
>
> I'm curious if anyone has any experience  with these prop governors.  I've
> got one installed on my IO-540, but  haven't yet run it.  It has the
> advantage of being a few pounds lighter  than the standard one and is 2
> inches shorter, improving my inlet ducting a  lot.
>
> Gary Casey
>
>