----------------------------------------------------------
                           Rocket-List Digest Archive
                                      ---
                     Total Messages Posted Tue 09/13/05: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 12:35 AM - Re: Lightspeed Plasma timing display  (Jeff Point)
     2. 08:29 AM - For Sale HRII 500TT AP, IFR, Foam Fire Suppression etc,etc, $100k  (hr69gt@webtv.net (thomas utterback))
 
 
 
________________________________  Message 1  _____________________________________


Time: 12:35:01 AM PST US
From: Jeff Point <jpoint@mindspring.com>
Subject: Re: Rocket-List: Lightspeed Plasma timing display

--> Rocket-List message posted by: Jeff Point <jpoint@mindspring.com>

Does this work on the plain-jane Plasma II, or does it require the II 
Plus which is designed to display advance?

Jeff

Wernerworld wrote:

>--> Rocket-List message posted by: "Wernerworld" <russ@wernerworld.com>
>
>Here's an interesting idea for those with a Lightspeed Plasma II or III 
>system.
>
>Hook up the Plasma timing display signal to your aircraft voltmeter display 
>through a switch so you can display your timing on your voltmeter.  .01 volt 
>+ 1 degree of advance.  Not sure what a retarded timing would show, but you 
>shouldn't need that.
>
>You would want the switch to normally show system voltage, but it could be 
>switched to show timing advance.  In the case of my VM1000 display, it would 
>also flash as it would be below minimum system voltage.
>
>Russ
>
>
>  
>






________________________________  Message 2  _____________________________________


Time: 08:29:10 AM PST US
From: hr69gt@webtv.net (thomas utterback)
Subject: Rocket-List: For Sale HRII 500TT AP, IFR, Foam Fire Suppression etc,etc,
$100k
        317-

--> Rocket-List message posted by: hr69gt@webtv.net (thomas utterback)

381-0238