Today's Message Index:
----------------------
1. 03:10 AM - (Mark Allen)
2. 03:24 AM - Re: (Tom Martin)
3. 04:21 AM - Re: (Ken Balch)
4. 04:57 AM - Re: (A1AVIATON@aol.com)
5. 05:12 AM - Re: Rocket-List Digest: 4 Msgs - 09/26/05 (Horton)
6. 06:11 AM - empennage fairing (Frazier, Vincent A)
7. 08:00 PM - Re: empennage fairing (Larry Schneider)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Rocket-List message posted by: Mark Allen <skyboltn@earthlink.net>
Can anyone give a semi-short answer as to which 540's will work on the
F-1 besides the C4B5?
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Rocket-List message posted by: "Tom Martin" <fairlea@amtelecom.net>
Mark
There are lots of 540 blocks that will fit on a rocket. Some key
items are the large holes on the mounting ears, a hollow crank that can be
fitted with the proper counterweights, the proper fuel pump pad, sump etc.
If you go to the Lycoming website you can get a list of all the engines and
configurations. Start with the C4B5 and work backwards. Sometimes the only
difference between it and another acceptable engine is something simple like
slick vs. bendix mags, as an example.
Tom Martin
-----Original Message-----
From: owner-rocket-list-server@matronics.com
[mailto:owner-rocket-list-server@matronics.com] On Behalf Of Mark Allen
Subject: Rocket-List:
--> Rocket-List message posted by: Mark Allen <skyboltn@earthlink.net>
Can anyone give a semi-short answer as to which 540's will work on the
F-1 besides the C4B5?
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Rocket-List: |
--> Rocket-List message posted by: Ken Balch <kbalch@cfl.rr.com>
Can the -K series be easily made to fit? It's a little heavier than the
-C & -D engines, but starting with 300HP before modding with high
compression pistons, etc. is looking really attractive...
Ken
Mark Allen wrote:
>--> Rocket-List message posted by: Mark Allen <skyboltn@earthlink.net>
>
>Can anyone give a semi-short answer as to which 540's will work on the
>F-1 besides the C4B5?
>
>
>
>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Rocket-List: |
--> Rocket-List message posted by: A1AVIATON@aol.com
IO-540 GIA5 WILL WORK FINE, IT HAS BIG MAIN, SMALL ROD. EXTRA HEAVY CASE,
MUCH STRONGER CRANK, ONLY A FEW LBS HEAVER, MIKE HRII N212MR O HRS, 30 YRS A&P
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Rocket-List Digest: 4 Msgs - 09/26/05 |
--> Rocket-List message posted by: "Horton" <mikesaero@ubtanet.com>
If you have seen Ron's Rocket you will understand he knows of which he
speaks. The glass work is impeccable and a thing of beauty, not to mention
the custom position light covers he made.
Do not archive.... later, Mike
----- Original Message -----
From: "Rocket-List Digest Server" <rocket-list-digest@matronics.com>
Subject: Rocket-List Digest: 4 Msgs - 09/26/05
> *
>
> ==================================================
> Online Versions of Today's List Digest Archive
> ==================================================
>
> Today's complete Rocket-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest formatted
> in HTML for viewing with a web browser and features Hyperlinked Indexes
> and Message Navigation. The .txt file includes the plain ASCII version
> of the Rocket-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
>
http://www.matronics.com/digest/rocket-list/Digest.Rocket-List.2005-09-26.ht
ml
>
> Text Version:
>
>
http://www.matronics.com/digest/rocket-list/Digest.Rocket-List.2005-09-26.tx
t
>
>
> ================================================
> EMail Version of Today's List Digest Archive
> ================================================
>
>
> Rocket-List Digest Archive
> ---
> Total Messages Posted Mon 09/26/05: 4
>
>
> Today's Message Index:
> ----------------------
>
> 1. 07:18 AM - Re: Empenage fairing (Ron Carter)
> 2. 07:29 AM - Re: Empenage fairing (LesDrag@aol.com)
> 3. 07:33 AM - Metal emp. fairing (Bryan Carr)
> 4. 08:19 AM - Re: Empenage fairing (nico css)
>
>
> ________________________________ Message 1
_____________________________________
>
>
> Time: 07:18:07 AM PST US
> From: "Ron Carter" <ronc@metropolisdesign.com>
> Subject: Re: Rocket-List: Empenage fairing
>
> --> Rocket-List message posted by: "Ron Carter"
<ronc@metropolisdesign.com>
>
> Whiner!
>
>
> ----- Original Message -----
> From: <Morocketman@aol.com>
> Subject: Re: Rocket-List: Empenage fairing
>
>
> > --> Rocket-List message posted by: Morocketman@aol.com
> >
> > Ron, You just explained better than any of us ever could; "why do we
hate
> > fiberglass!" Thank you, One who knows!
> >
> >
>
>
> ________________________________ Message 2
_____________________________________
>
>
> Time: 07:29:09 AM PST US
> From: LesDrag@aol.com
> Subject: Re: Rocket-List: Empenage fairing
>
> --> Rocket-List message posted by: LesDrag@aol.com
>
>
> That's strange. I have a constant itch to comment about working with
> fiberglass. :-)
>
> Jim Ayers
>
> Do Not Archive
>
> In a message dated 09/26/2005 7:18:40 AM Pacific Daylight Time,
> ronc@metropolisdesign.com writes:
>
> --> Rocket-List message posted by: "Ron Carter"
<ronc@metropolisdesign.com>
>
> Whiner!
>
>
> ----- Original Message -----
> From: <Morocketman@aol.com>
> Subject: Re: Rocket-List: Empenage fairing
>
>
> > --> Rocket-List message posted by: Morocketman@aol.com
> >
> > Ron, You just explained better than any of us ever could; "why do we
hate
> > fiberglass!" Thank you, One who knows!
> >
> >
>
>
> ________________________________ Message 3
_____________________________________
>
>
> Time: 07:33:24 AM PST US
> From: "Bryan Carr" <b.m.carr@telus.net>
> Subject: Rocket-List: Metal emp. fairing
>
> --> Rocket-List message posted by: "Bryan Carr" <b.m.carr@telus.net>
>
> Does anyone have any pictures of a metal empennage fairing for a Rocket or
RV-4?
> Vince Frazier said he made one but has no pics. Suggested I ask the
listers.
>
> I still hate fiberglassing
> Bryan Carr
>
>
> ________________________________ Message 4
_____________________________________
>
>
> Time: 08:19:41 AM PST US
> From: "nico css" <nico@cybersuperstore.com>
> Subject: Re: Rocket-List: Empenage fairing
>
> --> Rocket-List message posted by: "nico css" <nico@cybersuperstore.com>
>
> Oh, that's funny. Very sharp. Only if one has worked with the stuff before
> would one get it.
> Nico
>
> ----- Original Message -----
> From: <LesDrag@aol.com>
> Subject: Re: Rocket-List: Empenage fairing
>
>
> > --> Rocket-List message posted by: LesDrag@aol.com
> >
> >
> > That's strange. I have a constant itch to comment about working with
> > fiberglass. :-)
> >
> > Jim Ayers
> >
> > Do Not Archive
> >
> > In a message dated 09/26/2005 7:18:40 AM Pacific Daylight Time,
> > ronc@metropolisdesign.com writes:
> >
> > --> Rocket-List message posted by: "Ron Carter"
> <ronc@metropolisdesign.com>
> >
> > Whiner!
> >
> >
> > ----- Original Message -----
> > From: <Morocketman@aol.com>
> > To: <rocket-list@matronics.com>
> > Subject: Re: Rocket-List: Empenage fairing
> >
> >
> > > --> Rocket-List message posted by: Morocketman@aol.com
> > >
> > > Ron, You just explained better than any of us ever could; "why do we
> hate
> > > fiberglass!" Thank you, One who knows!
> > >
> > >
> >
> >
>
>
> --
>
>
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | empennage fairing |
--> Rocket-List message posted by: "Frazier, Vincent A" <VFrazier@usi.edu>
SNIP Does anyone have any pictures of a metal empennage fairing for a
Rocket or RV-4? Vince Frazier said he made one but has no pics.
Suggested I ask the listers. I still hate fiberglassing Bryan Carr
SNIP
Here's a similar fairing that I found online:
http://home.cogeco.ca/~farndt/images/fs_tail_fairing.jpg Definitely
not an RV, but the concept is the same.
I have several paper photos at home somewhere. I'll scan them and post
them tomorrow.... assuming that I can find them!
One of the RV's that I copied my RV-4 tail fairings from was a yellow RV
that had "Tweety Bird" on the front. There are many others. This isn't
an uncommon item.
Vince
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: empennage fairing |
--> Rocket-List message posted by: "Larry Schneider" <lschneider39@cox.net>
These guys were true metal men. They have made some RV metal fairings.
http://home.hiwaay.net/~sbuc/tvrvbg/barn.htm
----- Original Message -----
From: "Frazier, Vincent A" <VFrazier@usi.edu>
Subject: Rocket-List: empennage fairing
> --> Rocket-List message posted by: "Frazier, Vincent A" <VFrazier@usi.edu>
>
>
> SNIP Does anyone have any pictures of a metal empennage fairing for a
> Rocket or RV-4? Vince Frazier said he made one but has no pics.
> Suggested I ask the listers. I still hate fiberglassing Bryan Carr
> SNIP
>
> Here's a similar fairing that I found online:
> http://home.cogeco.ca/~farndt/images/fs_tail_fairing.jpg Definitely
> not an RV, but the concept is the same.
>
> I have several paper photos at home somewhere. I'll scan them and post
> them tomorrow.... assuming that I can find them!
>
> One of the RV's that I copied my RV-4 tail fairings from was a yellow RV
> that had "Tweety Bird" on the front. There are many others. This isn't
> an uncommon item.
>
> Vince
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|