---------------------------------------------------------- Rocket-List Digest Archive --- Total Messages Posted Fri 01/13/06: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:40 AM - Surecheck VRX for Sale (H PAINE) 2. 08:01 AM - Bendix servo (Kevin Shannon) 3. 08:09 AM - Re: Bendix servo (Rhonda Bewley) 4. 08:52 AM - TIO540-AG1A as rocket engine (Bob & Toodie Marshall) ________________________________ Message 1 _____________________________________ Time: 06:40:55 AM PST US From: H PAINE Subject: Rocket-List: Surecheck VRX for Sale Cc: "Boyd C. Braem" , rv10-list@matronics.com --> Rocket-List message posted by: H PAINE Surecheck VRX 8 months New. Works great Need $$ for next project 1st $550.00 takes it contact Harry off list at bluebird@dslextreme.com ________________________________ Message 2 _____________________________________ Time: 08:01:48 AM PST US From: "Kevin Shannon" Subject: Rocket-List: Bendix servo --> Rocket-List message posted by: "Kevin Shannon" Kevin Shannon Superintendent Severson Construction, LLC Hey Rocket world The C4B5 I bought has 800 hours on it, so I want to have the Bendix servo and the mags overhauled before installing on the plane. Looking for recommendations for shop(s) to send them out to. The mags are Slicks which were installed new in 2000. Thanks in advance for any input! Now get back to work Kevin Shannon Skinning the fuse HR II ________________________________ Message 3 _____________________________________ Time: 08:09:26 AM PST US Subject: RE: Rocket-List: Bendix servo From: "Rhonda Bewley" --> Rocket-List message posted by: "Rhonda Bewley" Kevin - We recommend Aircraft Accessories (918) 835-9924 or Quality Aircraft Accessories (918) 835-6948 here in Tulsa for o'h on those accessories. I would recommend that you do a 500 hour inspection/repair on the Slicks. Slick mags are considered replacement items rather than overhaul. Good luck! Rhonda Barrett-Bewley Barrett Precision Engines, Inc. Tulsa, OK 74115 (918) 835-1089 phone (918) 835-1754 fax www.barrettprecisionengines.com -----Original Message----- From: owner-rocket-list-server@matronics.com [mailto:owner-rocket-list-server@matronics.com] On Behalf Of Kevin Shannon Sent: Friday, January 13, 2006 10:01 AM Subject: Rocket-List: Bendix servo --> Rocket-List message posted by: "Kevin Shannon" Kevin Shannon Superintendent Severson Construction, LLC Hey Rocket world The C4B5 I bought has 800 hours on it, so I want to have the Bendix servo and the mags overhauled before installing on the plane. Looking for recommendations for shop(s) to send them out to. The mags are Slicks which were installed new in 2000. Thanks in advance for any input! Now get back to work Kevin Shannon Skinning the fuse HR II ________________________________ Message 4 _____________________________________ Time: 08:52:32 AM PST US From: "Bob & Toodie Marshall" Subject: Rocket-List: TIO540-AG1A as rocket engine --> Rocket-List message posted by: "Bob & Toodie Marshall" Hi Wayne, As Tom Martin says, there are other issues, There was some speculation on camshaft timing with the turbo engine VS normally aspirated engines and you might have a performance issue because of compression ratio, now that the turbo is removed, Call your kit supplier Mark,F or Ron Munson at performance engines or Monty Barrett at Barrett engines, they are the experts when it comes to Horse Power and engine mods, they are busy at times so you may have to call back! Best of Luck., Bob Marshall, HR II Rocket builder/owner