---------------------------------------------------------- Rocket-List Digest Archive --- Total Messages Posted Fri 01/20/06: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:14 AM - Re: Slick Magnetos (blairclan) 2. 02:15 AM - Re: forward fuse skins (blairclan) 3. 06:51 AM - Re: forward fuse skins (Jim Anglin) 4. 01:25 PM - Dimple VS machine CS (Bob & Toodie Marshall) ________________________________ Message 1 _____________________________________ Time: 02:14:49 AM PST US From: "blairclan" Subject: RE: Rocket-List: Slick Magnetos --> Rocket-List message posted by: "blairclan" I'm about to remove two Bendix mags and the starter vibrator from mine (shower of sparks type), all done 100 hours since o'haul or new. Tony -----Original Message----- From: owner-rocket-list-server@matronics.com [mailto:owner-rocket-list-server@matronics.com] On Behalf Of lee.logan@gulfstream.com Sent: Friday, 20 January 2006 6:31 AM Subject: Rocket-List: Slick Magnetos --> Rocket-List message posted by: lee.logan@gulfstream.com Anyone have a set of Slicks and harness for an IO-540 that they no longer need (switched to an electronic ignition)? I am in the process of building up my engine and am in the market for an airworthy pair. Thanks for the help!! Lee... ________________________________ Message 2 _____________________________________ Time: 02:15:45 AM PST US From: "blairclan" Subject: RE: Rocket-List: forward fuse skins --> Rocket-List message posted by: "blairclan" I countersunk, next time I'd probably dimple, finish not so important when painted. Cheers Tony -----Original Message----- From: owner-rocket-list-server@matronics.com [mailto:owner-rocket-list-server@matronics.com] On Behalf Of Kevin Shannon Sent: Friday, 20 January 2006 7:29 AM Subject: Rocket-List: forward fuse skins --> Rocket-List message posted by: "Kevin Shannon" Is anyone dimpling the forward .040 fuse skins instead of countersinking? The machined countersink is easier and looks better, but dimpling should be stronger, what did you all do? Kevin Shannon HR II ________________________________ Message 3 _____________________________________ Time: 06:51:34 AM PST US From: "Jim Anglin" Subject: Re: Rocket-List: forward fuse skins --> Rocket-List message posted by: "Jim Anglin" I'm probably the minority but i dimpled every skin and component .040" and less. It is stronger and easier. I also did this on my RV6 and didn't have the problem a lot of builders did with rivets loosening up on the belly. jim HR II 144HR DO NOT ARCHIVE ________________________________ Message 4 _____________________________________ Time: 01:25:12 PM PST US From: "Bob & Toodie Marshall" Subject: Rocket-List: Dimple VS machine CS --> Rocket-List message posted by: "Bob & Toodie Marshall" Dimple on mine, looks fine. Blue skies, Bob