Rocket-List Digest Archive

Fri 02/10/06


Total Messages Posted: 5



Today's Message Index:
----------------------
 
     1. 05:21 AM - Dukes pump alternative (Mark Frederick)
     2. 07:48 AM - batteries (Frazier, Vincent A)
     3. 08:34 AM - Re: Dukes pump alternative (julian dib)
     4. 08:36 AM - Re: Dukes pump (Jim Anglin)
     5. 09:54 AM - Re: Dukes pump (Brinker)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:21:27 AM PST US
    From: Mark Frederick <f1boss@gmail.com>
    Subject: Dukes pump alternative
    --> Rocket-List message posted by: Mark Frederick <f1boss@gmail.com> > Hi Fellas: Airflow performance has a good pump with bypass plumbing and pressure regulator etc all set up. Normal price is about $380 or so . Call Colleen at 864.576.4512 Cheers Mark ________________________________ Message > 8 _____________________________________ > > > Time: 07:35:42 PM PST US > From: WiningsJ@aol.com > Subject: Re: Rocket-List: Dukes pump > > --> Rocket-List message posted by: WiningsJ@aol.com > > I am using a Dukes pump. It has a pressure relief and check valve built > in > (real nice). It had been rebuilt shortly before I bought it. It had a > bearing > > seal start leaking. I replaced it with a new one and now it is leaking > again. I am going to find something else to use on my Rocket. Jim > Winings #34. > > 317-718-3415 > > -- Cheers! Mark Team Rocket LP Tech Support 512.352.6979 0800-1000;1500-1630 CST M-F


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:48:10 AM PST US
    Subject: batteries
    From: "Frazier, Vincent A" <VFrazier@usi.edu>
    Cc: <Morocketman@AOL.COM> --> Rocket-List message posted by: "Frazier, Vincent A" <VFrazier@usi.edu> http://www.svrbatteries.com/ I am using the SVR18 if I recall correctly. It has performed flawlessly for almost 2 years now. It's about $100. I have it mounted on its side and it works just fine that way. It's seems to be a little bigger weight and capacity than the PC680 ($75) that someone mentioned, but not nearly as big as the PC925 ($105). OTOH, one of the $35 batteries would probably be just fine also. YMMV, Vince


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:34:33 AM PST US
    From: "julian dib" <juliandib@hotmail.com>
    Subject: Dukes pump alternative
    --> Rocket-List message posted by: "julian dib" <juliandib@hotmail.com> mark,i not understad, need i a pump in my rocket''? I M WAITING NOTICES FROM YOU ABOUT THE AUTO PILOT. GRACIAS AMIGO JULIAN DIB >From: Mark Frederick <f1boss@gmail.com> >To: rocket-list@matronics.com >Subject: Rocket-List: Dukes pump alternative >Date: Fri, 10 Feb 2006 07:19:39 -0600 > >--> Rocket-List message posted by: Mark Frederick <f1boss@gmail.com> > > > Hi Fellas: > > >Airflow performance has a good pump with bypass plumbing and pressure >regulator etc all set up. Normal price is about $380 or so . Call Colleen >at 864.576.4512 > >Cheers >Mark > >________________________________ Message > > 8 _____________________________________ > > > > > > Time: 07:35:42 PM PST US > > From: WiningsJ@aol.com > > Subject: Re: Rocket-List: Dukes pump > > > > --> Rocket-List message posted by: WiningsJ@aol.com > > > > I am using a Dukes pump. It has a pressure relief and check valve built > > in > > (real nice). It had been rebuilt shortly before I bought it. It had a > > bearing > > > > seal start leaking. I replaced it with a new one and now it is leaking > > again. I am going to find something else to use on my Rocket. Jim > > Winings #34. > > > > 317-718-3415 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >-- > >Cheers! >Mark >Team Rocket LP >Tech Support 512.352.6979 >0800-1000;1500-1630 CST M-F > > ,need i a pump in my rocket


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:36:03 AM PST US
    From: "Jim Anglin" <n144hr@earthlink.net>
    Subject: Re: Dukes pump
    --> Rocket-List message posted by: "Jim Anglin" <n144hr@earthlink.net> I may be outta line here since you said Dukes, and I am sure you already know about AFP, but I used their setup between the selector and engine for my Rocket and it is beautiful. Has all the check valves, PRV, serviceable filter, hp rotary pump, and everything you need. A little pricey at +- $400, but hey - it's the fuel system - not where I want to cut corners for a few dollars. Jim Anglin HR II N144HR DO NOT ARCHIVE


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:54:51 AM PST US
    From: "Brinker" <brinker@cox-internet.com>
    Subject: Re: Dukes pump
    --> Rocket-List message posted by: "Brinker" <brinker@cox-internet.com> When you refer to AFP you are refering to Airflow Perfomance ? Randy ----- Original Message ----- From: "Jim Anglin" <n144hr@earthlink.net> Sent: Friday, February 10, 2006 10:35 AM Subject: Re: Rocket-List: Dukes pump > --> Rocket-List message posted by: "Jim Anglin" <n144hr@earthlink.net> > > I may be outta line here since you said Dukes, and I am sure you already > know about AFP, but I used their setup between the selector and engine for > my Rocket and it is beautiful. Has all the check valves, PRV, serviceable > filter, hp rotary pump, and everything you need. A little pricey at +- > $400, but hey - it's the fuel system - not where I want to cut corners > for a few dollars. > > > Jim Anglin > HR II N144HR > DO NOT ARCHIVE > > >




    Other Matronics Email List Services

  • Post A New Message
  •   rocket-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Rocket-List.htm
  • Full Archive Search Engine
  •   http://www.matronics.com/search
  • 7-Day List Browse
  •   http://www.matronics.com/browse/rocket-list
  • Browse Rocket-List Digests
  •   http://www.matronics.com/digest/rocket-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contributions

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --