----------------------------------------------------------
                           Rocket-List Digest Archive
                                      ---
                     Total Messages Posted Tue 03/07/06: 5
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 02:49 AM - F1-EVO Wing Flap(s)  (Tim C)
     2. 03:46 PM - upper and lower gear leg fairings  (Jim Stone)
     3. 07:08 PM - Re: upper and lower gear leg fairings  (Fred LaForge)
     4. 11:13 PM - Re: upper and lower gear leg fairings  (Tim C)
     5. 11:27 PM - Re:Upper and lower gear leg fairings  (Fred Weaver)
 
 
 
________________________________  Message 1  _____________________________________


Time: 02:49:55 AM PST US
From: "Tim C" <tlc2@telus.net>
Subject: Rocket-List: F1-EVO Wing Flap(s)

--> Rocket-List message posted by: "Tim C" <tlc2@telus.net>

Sure would like to see a picture/drawings of the Evo newer 'Fowler' type
flaps to compare to the -4 simple flap.

Tim







 
 
 



________________________________  Message 2  _____________________________________


Time: 03:46:24 PM PST US
From: "Jim Stone" <jrstone@insightbb.com>
Subject: Rocket-List: upper and lower gear leg fairings

--> Rocket-List message posted by: "Jim Stone" <jrstone@insightbb.com>

Does anyone know of a source for upper and lower gear leg fairings to fit a Harmon
Rocket?
I know that Massey aircraft sells them but I'm not sure of the quality and fit.
Thanks,
Jim 






 
 
 



________________________________  Message 3  _____________________________________


Time: 07:08:23 PM PST US
From: "Fred LaForge" <fred.laforge@verizon.net>
Subject: Re: Rocket-List: upper and lower gear leg fairings

--> Rocket-List message posted by: "Fred LaForge" <fred.laforge@verizon.net>

        I`m making my own, I had a .016 rudder skin, rough trimmed it and 
laid up fairings in it.
----- Original Message ----- 
From: "Jim Stone" <jrstone@insightbb.com>
Sent: Tuesday, March 07, 2006 3:43 PM
Subject: Rocket-List: upper and lower gear leg fairings


> --> Rocket-List message posted by: "Jim Stone" <jrstone@insightbb.com>
>
> Does anyone know of a source for upper and lower gear leg fairings to fit 
> a Harmon Rocket?
> I know that Massey aircraft sells them but I'm not sure of the quality and 
> fit.
> Thanks,
> Jim
>
>
> -- 
>
> 







 
 
 



________________________________  Message 4  _____________________________________


Time: 11:13:52 PM PST US
From: "Tim C" <tlc2@telus.net>
Subject: Re: Rocket-List: upper and lower gear leg fairings

--> Rocket-List message posted by: "Tim C" <tlc2@telus.net>

I've got new & old RV-4 Plans/Manuals....Dug up some stuff on Aluminum
fairings and put it up on my webspace fer ye>....Tim Cold Lk.
http://www3.telus.net/projectpage/projectpage/

         I`m making my own, I had a .016 rudder skin, rough trimmed it and
> laid up fairings in it. >

 > Does anyone know of a source for upper and lower gear leg fairings to fit
a Harmon Rocket?







 
 
 



________________________________  Message 5  _____________________________________


Time: 11:27:51 PM PST US
From: "Fred Weaver" <Mytyweav@earthlink.net>
Subject: Rocket-List: Re:Upper and lower gear leg fairings

--> Rocket-List message posted by: "Fred Weaver" <Mytyweav@earthlink.net>

Yo Jim.....     I believe it's better to just bite the bullet and form your
own. If you buy any that are "Supposed" to fit, I guarantee that they won't.
Why fight the parts that don't fit when you can enjoy a week of forming your
own to your own airframe?  You will be a happy camper if/when you make your
own intersection fairings.
Weav
----- Original Message ----- 
From: "Jim Stone" <jrstone@insightbb.com>
Sent: Tuesday, March 07, 2006 3:43 PM
Subject: Rocket-List: upper and lower gear leg fairings


> --> Rocket-List message posted by: "Jim Stone" <jrstone@insightbb.com>
>
> Does anyone know of a source for upper and lower gear leg fairings to fit
a Harmon Rocket?
> I know that Massey aircraft sells them but I'm not sure of the quality and
fit.
> Thanks,
> Jim
>
>