Today's Message Index:
----------------------
1. 09:40 AM - Re: Prop Governers (Condon, Philip M.)
2. 09:40 AM - Re: M O R E O N P R O P G O V E R N E R (Condon, Philip M.)
3. 02:07 PM - Re: Re: M O R E O N P R O P G O V E R N E R (Hr2pilot@aol.com)
4. 05:46 PM - In-house aerobatics (css nico)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | RE: Prop Governers |
--> Rocket-List message posted by: "Condon, Philip M." <pcondon@mitre.org>
My -540-C4B5 has a 1/4 inch or so spacer between the case and the
governor. Without this spacer, the drive gear preload would be amiss.
Also, the gaskets need care when installing to get the proper ones due
to oil hole alignment. I would recommend a prop shop rebuild the
governor. There are oil orifices and passages within the governor and
the repair facility can tweak the governor and "match" your speed
(Rocket) and Prop. Also, the proper gaskets can be supplied by the
repair facility...they know which ones to use on both sides of the
spacer.......
"
-----Original Message-----
From: owner-rocket-list-server@matronics.com
[mailto:owner-rocket-list-server@matronics.com] On Behalf Of
Rocket-List Digest Server
Sent: Saturday, May 06, 2006 2:58 AM
Subject: Rocket-List Digest: 1 Msgs - 05/05/06
*
==================================================
Online Versions of Today's List Digest Archive
==================================================
Today's complete Rocket-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest
formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Rocket-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/rocket-list/Digest.Rocket-List.2006-05-
05.html
Text Version:
http://www.matronics.com/digest/rocket-list/Digest.Rocket-List.2006-05-
05.txt
================================================
EMail Version of Today's List Digest Archive
================================================
----------------------------------------------------------
Rocket-List Digest Archive
---
Total Messages Posted Fri 05/05/06: 1
----------------------------------------------------------
Today's Message Index:
----------------------
1. 12:25 PM - prop governors (Kevin Shannon)
________________________________ Message 1
_____________________________________
Time: 12:25:54 PM PST US
From: "Kevin Shannon" <kshannon@seanet.com>
Subject: Rocket-List: prop governors
--> Rocket-List message posted by: "Kevin Shannon"
<kshannon@seanet.com>
Does anyone have an application guide for Woodward govs? I have an IO
540
C4B5 Narrow deck, the woodward 210932 gov I have came with the prop I
bought, which was on a flying HRII that swiched to a composite. The
shaft
looks like it engages into the driveshaft far enough (about .45") but
the
studs are too short. Is this just a matter of putting on longer studs?
Or do
I have the wrong governor for a narrow deck- that is the question.
Kevin Shannon
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | RE: M O R E O N P R O P G O V E R N E R |
--> Rocket-List message posted by: "Condon, Philip M." <pcondon@mitre.org>
Second thoughts.....maybe this governor was not the governor that
matched the prop you got(Studd length amiss). Different governors base
mount flanges are of different thicknesses (Garwin, Pesto, Woodward,
(Cessna/Woodward).
-----Original Message-----
From: owner-rocket-list-server@matronics.com
[mailto:owner-rocket-list-server@matronics.com] On Behalf Of
Rocket-List Digest Server
Sent: Saturday, May 06, 2006 2:58 AM
Subject: Rocket-List Digest: 1 Msgs - 05/05/06
*
==================================================
Online Versions of Today's List Digest Archive
==================================================
Today's complete Rocket-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest
formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Rocket-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/rocket-list/Digest.Rocket-List.2006-05-
05.html
Text Version:
http://www.matronics.com/digest/rocket-list/Digest.Rocket-List.2006-05-
05.txt
================================================
EMail Version of Today's List Digest Archive
================================================
----------------------------------------------------------
Rocket-List Digest Archive
---
Total Messages Posted Fri 05/05/06: 1
----------------------------------------------------------
Today's Message Index:
----------------------
1. 12:25 PM - prop governors (Kevin Shannon)
________________________________ Message 1
_____________________________________
Time: 12:25:54 PM PST US
From: "Kevin Shannon" <kshannon@seanet.com>
Subject: Rocket-List: prop governors
--> Rocket-List message posted by: "Kevin Shannon"
<kshannon@seanet.com>
Does anyone have an application guide for Woodward govs? I have an IO
540
C4B5 Narrow deck, the woodward 210932 gov I have came with the prop I
bought, which was on a flying HRII that swiched to a composite. The
shaft
looks like it engages into the driveshaft far enough (about .45") but
the
studs are too short. Is this just a matter of putting on longer studs?
Or do
I have the wrong governor for a narrow deck- that is the question.
Kevin Shannon
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RE: M O R E O N P R O P G O V E R N E R |
--> Rocket-List message posted by: Hr2pilot@aol.com
Remove the short studs and move forward.
John
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | In-house aerobatics |
--> Rocket-List message posted by: "css nico" <nico@cybersuperstore.com>
This would make Bob Hoover drool.
http://www.teletuition.org/documents/Aviation/Movies/InhouseAerobatics.wm=
v
Nico
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|