---------------------------------------------------------- Rocket-List Digest Archive --- Total Messages Posted Thu 05/03/07: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:18 PM - Louvers (rocketman) 2. 08:37 PM - Re: Louvers (Jones15183@aol.com) 3. 08:38 PM - Re: Louvers (Jim Stone) ________________________________ Message 1 _____________________________________ Time: 08:18:23 PM PST US From: rocketman Subject: Rocket-List: Louvers Rocket list has been kind of thin lately so here goes: After procrastinating many years about hi CHT's & oil temps on climbout or just hi period on hot days I finally bit the bullet and installed Billy Waters louvers on Lower cowl. Yes I have plenum helped a little bit made CHTS very even but still hot have oil cooler mounted off back of number 5 should have done off of #6 Okay on 80 deg OAT on CLIMBOUT 2500 RPM 25 IN MP at 120 mph indicated temps on 5 & 6 never went past 405 wahoo!!! Oil Temp at 185 interestingly the oil temp went down as well on both the oil temps and CHT'S OVERALL REDUCTION IS BETWEEN 25-30 DEGREES :-) depend on power setting and altitude. Can not discern any noticeable speed penalty :-) If you want to stay cool I highly recommend this for any rocketman billy waters info is Jones15183@aol.com Hi Harry, sorry for the delay in getting back to you. I have borrowed a Dig. camera to take pics, to send to you. The price for the Louver panel is $ 150.00, this includes S&H by priority mail to your door. ( In the United States ).If you do not live in USA shipping will be different price...Does not include ins. Although I haven't sent any Insured before. Not much damage can be made to panel. If you decide to purchase a Louver panel for your plane, just send me a check or M.O. for the above amt. to Billy Waters, 745 J.B. Vandiver Loop, Moody, Tx. 76657. And Give me yor proper shippng address...I have two inquiries, and fortunately these are the last two Louver panels that I have left. The Louver panel is approx. 11"x17 1/2" is made from .032 Al. has 12 louvers in each side. Won't be making any more until summer. I am going to attempt to send pics, and other mat'l. to you. If you receive same, let me know..thanks billy waters Harry Paine 266HP 440 HRS ________________________________ Message 2 _____________________________________ Time: 08:37:40 PM PST US From: Jones15183@aol.com Subject: Re: Rocket-List: Louvers Good job Harry ************************************** See what's free at http://www.aol.com. ________________________________ Message 3 _____________________________________ Time: 08:38:35 PM PST US From: "Jim Stone" Subject: Re: Rocket-List: Louvers Hey thanks for the info, do you know if the Harmon Rocket runs hot too? I haven't heard any complaints but you know how that goes. Thanks again for the info, Jim Stone HRII Louisville ----- Original Message ----- From: rocketman To: Boyd C. Braem Sent: Thursday, May 03, 2007 11:17 PM Subject: Rocket-List: Louvers Rocket list has been kind of thin lately so here goes: After procrastinating many years about hi CHT's & oil temps on climbout or just hi period on hot days I finally bit the bullet and installed Billy Waters louvers on Lower cowl. Yes I have plenum helped a little bit made CHTS very even but still hot have oil cooler mounted off back of number 5 should have done off of #6 Okay on 80 deg OAT on CLIMBOUT 2500 RPM 25 IN MP at 120 mph indicated temps on 5 & 6 never went past 405 wahoo!!! Oil Temp at 185 interestingly the oil temp went down as well on both the oil temps and CHT'S OVERALL REDUCTION IS BETWEEN 25-30 DEGREES :-) depend on power setting and altitude. Can not discern any noticeable speed penalty :-) If you want to stay cool I highly recommend this for any rocketman billy waters info is Jones15183@aol.com Hi Harry, sorry for the delay in getting back to you. I have borrowed a Dig. camera to take pics, to send to you. The price for the Louver panel is $ 150.00, this includes S&H by priority mail to your door. ( In the United States ).If you do not live in USA shipping will be different price...Does not include ins. Although I haven't sent any Insured before. Not much damage can be made to panel. If you decide to purchase a Louver panel for your plane, just send me a check or M.O. for the above amt. to Billy Waters, 745 J.B. Vandiver Loop, Moody, Tx. 76657. And Give me yor proper shippng address...I have two inquiries, and fortunately these are the last two Louver panels that I have left. The Louver panel is approx. 11"x17 1/2" is made from .032 Al. has 12 louvers in each side. Won't be making any more until summer. I am going to attempt to send pics, and other mat'l. to you. If you receive same, let me know..thanks billy waters Harry Paine 266HP 440 HRS ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rocket-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Rocket-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rocket-list Browse Digests http://www.matronics.com/digest/rocket-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.