---------------------------------------------------------- Rocket-List Digest Archive --- Total Messages Posted Mon 02/04/08: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:35 AM - cleveland parking brake no hold? (Sprayers@aol.com) 2. 07:55 AM - Re: cleveland parking brake no hold? (Denis Walsh) ________________________________ Message 1 _____________________________________ Time: 07:35:13 AM PST US From: Sprayers@aol.com Subject: Rocket-List: cleveland parking brake no hold? Does any one have any idea why my cleveland parking brake does not hold (after I land )and put the brakes on. The brake will hold for few minutes and then slowly release as time goes on. My brake works PERFECT if I put the brakes on when the HR2 is in the hangar and has not flown for some time. It will hold for couple days. There are no leaks and I have pumped 10 gallons of fluid up through the brakes the last year or so. I donot have any loops in the hyd lines that go down. I have taken the brake loose at the wheel and taped on it etc. I have also run the brake lines out of the heat (forward of the firewall) and they come through firewall at bottom corner behind engine mount. Remember they work perfect when the airplane has been in hangar and not flown. What is going on here? Thanks Bill **************Biggest Grammy Award surprises of all time on AOL Music. (http://music.aol.com/grammys/pictures/never-won-a-grammy?NCID=aolcmp003000000025 48) ________________________________ Message 2 _____________________________________ Time: 07:55:40 AM PST US From: Denis Walsh Subject: Re: Rocket-List: cleveland parking brake no hold? Check the installation angle. These only fully shut off when the clock position of the arm is in some funky, non intuitive angle. got fo the web site and it will show you the right clock. By no means the only suspect but a good place to start. On Feb 4, 2008, at 8:27 , Sprayers@aol.com wrote: > Does any one have any idea why my cleveland parking brake does not > hold (after I land )and put the brakes on. The brake will hold for > few minutes and then slowly release as time goes on. My brake works > PERFECT if I put the brakes on when the HR2 is in the hangar and > has not flown for some time. It will hold for couple days. There > are no leaks and I have pumped 10 gallons of fluid up through the > brakes the last year or so. I donot have any loops in the hyd lines > that go down. I have taken the brake loose at the wheel and taped on > it etc. I have also run the brake lines out of the heat (forward of > the firewall) and they come through firewall at bottom corner behind > engine mount. Remember they work perfect when the airplane has been > in hangar and not flown. What is going on here? Thanks Bill > > > Who's never won? Biggest Grammy Award surprises of all time on AOL > Music. > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rocket-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Rocket-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rocket-list Browse Digests http://www.matronics.com/digest/rocket-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.