Today's Message Index:
----------------------
1. 05:55 AM - Re: Need a right elevator (Ernest Hale)
2. 10:00 AM - Re: Need a right elevator (Brian Adams)
3. 10:06 AM - Re: Need a right elevator (Ernest Hale)
4. 03:53 PM - Re: Need a right elevator (Stuart Hutchison)
5. 08:03 PM - Re: Need a right elevator (Ernest Hale)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Need a right elevator |
Hey Miles,
Thanks for responding, it actually is a HRII that I put the sliding canopy
on. I think we have one spotted but will let you know if that doesn't work
out. Where are you located? I am in Jacksonville, FL.
Ernest
From: Bowen Miles <cessna170bdriver@yahoo.com>
Subject: Re: Rocket-List: Need a right elevator
Ernest,
If you had your canopy "back" instead of "over", I assume you've got an F-1
instead of an HRII. If so, I doubt you're interested, but I have a 90%
complete (needs counterweights and fiberglass) set of elevators for an HRII
(0.016 skins).
Miles
--- On Thu, 10/18/12, Ernest Hale <ernest@flmitigation.com> wrote:
>
> From: Ernest Hale <ernest@flmitigation.com>
> Subject: Rocket-List: Need a right elevator
> To: rocket-list@matronics.com, "Rocket-List Digest List"
> <rocket-list-digest@matronics.com>
> Date: Thursday, October 18, 2012, 5:07 PM
>
> <http://us.mc1815.mail.yahoo.com/mc/compose?to=ernest@flmitigation.com> >
>
> I had an unfortunate incident today where while I was running the engine
> up on my Rocket with the canopy back the canopy took a departure from the
> plane and hit my right elevator. Does anyone have one that they would
> like to sell? Right elevator that is.
>
> You can reach me here or at ernest@flmitigation.com
> <http://us.mc1815.mail.yahoo.com/mc/compose?to=ernest@flmitigation.com> .
>
> Thanks,
>
> Ernest Hale
>
> On 7/1/12 3:00 AM, "Rocket-List Digest Server" <rocket-list@matronics.com
> <http://us.mc1815.mail.yahoo.com/mc/compose?to=rocket-list@matronics.com> >
> wrote:
>
>> >*
>> >
>> > ========================
>> > Online Versions of Today's List Digest Archive
>> > ========================
>> >
>> >Today's complete Rocket-List Digest can also be found in either of the
>> >two Web Links listed below. The .html file includes the Digest formatted
>> >in HTML for viewing with a web browser and features Hyperlinked Indexes
>> >and Message Navigation. The .txt file includes the plain ASCII version
>> >of the Rocket-List Digest and can be viewed with a generic text editor
>> >such as Notepad or with a web browser.
>> >
>> >HTML Version:
>> >
>> >
>> >http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapt
>> >er 12-06-30&Archive=Rocket
>> >
>> >Text Version:
>> >
>> >
>> >http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapte
>> >r 12-06-30&Archive=Rocket
>> >
>> >
>> > ======================
>> > EMail Version of Today's List Digest Archive
>> > ======================
>> >
>> >
>> > ----------------------------------------------------------
>> > Rocket-List Digest Archive
>> > ---
>> > Total Messages Posted Sat 06/30/12: 3
>> > ----------------------------------------------------------
>> >
>> >
>> >Today's Message Index:
>> >----------------------
>> >
>> > 1. 05:28 AM - Engine failure (Jim Stone)
>> > 2. 09:17 AM - Re: Engine failure (Rob Ray)
>> > 3. 06:05 PM - Re: Engine failure (cybersuperstore)
>> >
>> >
>> >
>> >________________________________ Message 1
>> >_____________________________________
>> >
>> >
>> >Time: 05:28:09 AM PST US
>> >Subject: Rocket-List: Engine failure
>> >From: Jim Stone <jrstone@insightbb.com
>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=jrstone@insightbb.com> >
>> >
>> >
>> >I had an engine failure in my Harmon Rocket (Lyc IO 540), and I am
>> >looking for
>> >an engine expert to have a look at all the pieces and tell me what caused
>> >the
>> >failure. I have the entire engine disassembled and available for
>> >inspection in
>> >Louisville Kentucky.
>> >
>> >Or, I would like any info on KS bearing failure and their roll in engine
>> >failures.
>> >My engine failed with less than 400 hours since 0 time rebuild.
>> >
>> >The engine started making a faint knocking noise followed by oil temp
>> >climb and
>> >caution, I headed back to my field and I was on base leg when a
>> >connecting rod
>> >failed and punched thru the case, I landed without further incident.
>> >
>> >The engine seized just after touchdown. The case, crank, cam, rods,
>> >pistons and
>> >cylinders were all damaged and unusable.
>> >Of note, my engine started making metal on the last oil analysis
>> >indicating something
>> >wearing, the company said to retest in 25 hours, I didn't make 10. I
>> >suspect
>> >the KS rod bearing failed causing the rod bolts to work harden and fail.
>> >If you have any experience or knowledge you could pass on to me, please
>> >call or
>> >email me.
>> >
>> >My goal is to pursue KS bearing if they are determined to be the cause of
>> >the failure.
>> >
>> >
>> >Thanks,
>> >Jim Stone
>> >502 235-3599
>> >
>> >
>> >Sent from my iPad
>> >
>> >
>> >________________________________ Message 2
>> >_____________________________________
>> >
>> >
>> >Time: 09:17:35 AM PST US
>> >From: Rob Ray <smokyray@rocketmail.com
>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=smokyray@rocketmail.com> >
>> >Subject: Re: Rocket-List: Engine failure
>> >
>> >
>> >Jim,
>> > I will visit my Lycoming expert friend JR next week and share your
>> >experience.
>> >I will let you know what transpires.
>> >
>> >Smokey
>> >
>> >Sent from my iPhone
>> >
>> >On Jun 30, 2012, at 8:27, Jim Stone <jrstone@insightbb.com
>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=jrstone@insightbb.com> >
>> wrote:
>> >
>>> >>
>>> >> I had an engine failure in my Harmon Rocket (Lyc IO 540), and I am
>>> >>looking for
>> >an engine expert to have a look at all the pieces and tell me what caused
>> >the
>> >failure. I have the entire engine disassembled and available for
>> >inspection
>> >in Louisville Kentucky.
>>> >>
>>> >> Or, I would like any info on KS bearing failure and their roll in
>>> >>engine failures.
>> >My engine failed with less than 400 hours since 0 time rebuild.
>>> >>
>>> >> The engine started making a faint knocking noise followed by oil temp
>>> >>climb and
>> >caution, I headed back to my field and I was on base leg when a connecting
>> >rod failed and punched thru the case, I landed without further incident.
>>> >>
>>> >> The engine seized just after touchdown. The case, crank, cam, rods,
>>> >>pistons
>> >and cylinders were all damaged and unusable.
>>> >> Of note, my engine started making metal on the last oil analysis
>>> >>indicating something
>> >wearing, the company said to retest in 25 hours, I didn't make 10. I
>> >suspect the KS rod bearing failed causing the rod bolts to work harden
>> >and fail.
>>> >> If you have any experience or knowledge you could pass on to me, please
>>> >>call
>> >or email me.
>>> >>
>>> >> My goal is to pursue KS bearing if they are determined to be the cause
>>> >>of the
>> >failure.
>>> >>
>>> >> Thanks,
>>> >> Jim Stone
>>> >> 502 235-3599
>>> >>
>>> >>
>>> >>
>>> >> Sent from my iPad
>>> >>
>>> >>
>>> >>
>>> >>
>> >
>> >
>> >________________________________ Message 3
>> >_____________________________________
>> >
>> >
>> >Time: 06:05:39 PM PST US
>> >From: "cybersuperstore" <nico@cybersuperstore.com
>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=nico@cybersuperstore.com> >
>> >Subject: RE: Rocket-List: Engine failure
>> >
>> >
>> >Glad you are OK, Jim.
>> >
>> >-----Original Message-----
>> >From: owner-rocket-list-server@matronics.com
>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=owner-rocket-list-server@matro
>> nics.com>
>> >[mailto:owner-rocket-list-server@matronics.com
>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=owner-rocket-list-server@matro
>> nics.com> ] On Behalf Of Jim Stone
>> >Sent: Saturday, June 30, 2012 5:28 AM
>> >Subject: Rocket-List: Engine failure
>> >
>> >
>> >I had an engine failure in my Harmon Rocket (Lyc IO 540), and I am looking
>> >for an engine expert to have a look at all the pieces and tell me what
>> >caused the failure. I have the entire engine disassembled and available
>> >for
>> >inspection in Louisville Kentucky.
>> >
>> >Or, I would like any info on KS bearing failure and their roll in engine
>> >failures. My engine failed with less than 400 hours since 0 time
>> >rebuild.
>> >
>> >The engine started making a faint knocking noise followed by oil temp
>> >climb
>> >and caution, I headed back to my field and I was on base leg when a
>> >connecting rod failed and punched thru the case, I landed without further
>> >incident.
>> >
>> >The engine seized just after touchdown. The case, crank, cam, rods,
>> >pistons
>> >and cylinders were all damaged and unusable.
>> >Of note, my engine started making metal on the last oil analysis
>> >indicating
>> >something wearing, the company said to retest in 25 hours, I didn't make
>> >10.
>> >I suspect the KS rod bearing failed causing the rod bolts to work harden
>> >and
>> >fail.
>> >If you have any experience or knowledge you could pass on to me, please
>> >call
>> >or email me.
>> >
>> >My goal is to pursue KS bearing if they are determined to be the cause of
>> >the failure.
>> >
>> >Thanks,
>> >Jim Stone
>> >502 235-3599
>> >
>> >
>> >Sent from my iPad
>> >
>> >http://www.matronics.com/contri===============
>
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Need a right elevator |
Ernest,
Location, Reno, NV
Let me know if you need it. It is also the same as Miles. Needs weights an
d tip.
Brian
Sent from my iPhone
On Oct 19, 2012, at 4:54, Ernest Hale <ernest@flmitigation.com> wrote:
> Hey Miles,
>
> Thanks for responding, it actually is a HRII that I put the sliding canopy
on. I think we have one spotted but will let you know if that doesn't work
out. Where are you located? I am in Jacksonville, FL.
>
> Ernest
>
> From: Bowen Miles <cessna170bdriver@yahoo.com>
> Date: Thursday, October 18, 2012 9:36 PM
> To: <rocket-list@matronics.com>
> Subject: Re: Rocket-List: Need a right elevator
>
> Ernest,
>
> If you had your canopy "back" instead of "over", I assume you've got an F-
1 instead of an HRII. If so, I doubt you're interested, but I have a 90% com
plete (needs counterweights and fiberglass) set of elevators for an HRII (0.
016 skins).
>
> Miles
>
> --- On Thu, 10/18/12, Ernest Hale <ernest@flmitigation.com> wrote:
>
> From: Ernest Hale <ernest@flmitigation.com>
> Subject: Rocket-List: Need a right elevator
> To: rocket-list@matronics.com, "Rocket-List Digest List" <rocket-list-dige
st@matronics.com>
> Date: Thursday, October 18, 2012, 5:07 PM
>
>
> I had an unfortunate incident today where while I was running the engine
> up on my Rocket with the canopy back the canopy took a departure from the
> plane and hit my right elevator. Does anyone have one that they would
> like to sell? Right elevator that is.
>
> You can reach me here or at ernest@flmitigation.com.
>
> Thanks,
>
> Ernest Hale
>
> On 7/1/12 3:00 AM, "Rocket-List Digest Server" <rocket-list@matronics.com>
> wrote:
>
> >*
> >
> > ========================
> > Online Versions of Today's List Digest Archive
> > ========================
> >
> >Today's complete Rocket-List Digest can also be found in either of the
> >two Web Links listed below. The .html file includes the Digest formatted
> >in HTML for viewing with a web browser and features Hyperlinked Indexes
> >and Message Navigation. The .txt file includes the plain ASCII version
> >of the Rocket-List Digest and can be viewed with a generic text editor
> >such as Notepad or with a web browser.
> >
> >HTML Version:
> >
> >
> >http://www.matronics.com/digest/digestview.php?Style=82701&View=html&
Chapt
> >er 12-06-30&Archive=Rocket
> >
> >Text Version:
> >
> >
> >http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&C
hapte
> >r 12-06-30&Archive=Rocket
> >
> >
> > ======================
> > EMail Version of Today's List Digest Archive
> > ======================
> >
> >
> > ----------------------------------------------------------
> > Rocket-List Digest Archive
> > ---
> > Total Messages Posted Sat 06/30/12: 3
> > ----------------------------------------------------------
> >
> >
> >Today's Message Index:
> >----------------------
> >
> > 1. 05:28 AM - Engine failure (Jim Stone)
> > 2. 09:17 AM - Re: Engine failure (Rob Ray)
> > 3. 06:05 PM - Re: Engine failure (cybersuperstore)
> >
> >
> >
> >________________________________ Message 1
> >_____________________________________
> >
> >
> >Time: 05:28:09 AM PST US
> >Subject: Rocket-List: Engine failure
> >From: Jim Stone <jrstone@insightbb.com>
> >
> >
> >I had an engine failure in my Harmon Rocket (Lyc IO 540), and I am
> >looking for
> >an engine expert to have a look at all the pieces and tell me what caused
> >the
> >failure. I have the entire engine disassembled and available for
> >inspection in
> >Louisville Kentucky.
> >
> >Or, I would like any info on KS bearing failure and their roll in engine
> >failures.
> >My engine failed with less than 400 hours since 0 time rebuild.
> >
> >The engine started making a faint knocking noise followed by oil temp
> >climb and
> >caution, I headed back to my field and I was on base leg when a
> >connecting rod
> >failed and punched thru the case, I landed without further incident.
> >
> >The engine seized just after touchdown. The case, crank, cam, rods,
> >pistons and
> >cylinders were all damaged and unusable.
> >Of note, my engine started making metal on the last oil analysis
> >indicating something
> >wearing, the company said to retest in 25 hours, I didn't make 10. I
> >suspect
> >the KS rod bearing failed causing the rod bolts to work harden and fail.
> >If you have any experience or knowledge you could pass on to me, please
> >call or
> >email me.
> >
> >My goal is to pursue KS bearing if they are determined to be the cause of
> >the failure.
> >
> >
> >Thanks,
> >Jim Stone
> >502 235-3599
> >
> >
> >Sent from my iPad
> >
> >
> >________________________________ Message 2
> >_____________________________________
> >
> >
> >Time: 09:17:35 AM PST US
> >From: Rob Ray <smokyray@rocketmail.com>
> >Subject: Re: Rocket-List: Engine failure
> >
> >
> >Jim,
> > I will visit my Lycoming expert friend JR next week and share your
> >experience.
> >I will let you know what transpires.
> >
> >Smokey
> >
> >Sent from my iPhone
> >
> >On Jun 30, 2012, at 8:27, Jim Stone <jrstone@insightbb.com> wrote:
> >
> >>
> >> I had an engine failure in my Harmon Rocket (Lyc IO 540), and I am
> >>looking for
> >an engine expert to have a look at all the pieces and tell me what caused
> >the
> >failure. I have the entire engine disassembled and available for
> >inspection
> >in Louisville Kentucky.
> >>
> >> Or, I would like any info on KS bearing failure and their roll in
> >>engine failures.
> >My engine failed with less than 400 hours since 0 time rebuild.
> >>
> >> The engine started making a faint knocking noise followed by oil temp
> >>climb and
> >caution, I headed back to my field and I was on base leg when a connectin
g
> >rod failed and punched thru the case, I landed without further incident.
> >>
> >> The engine seized just after touchdown. The case, crank, cam, rods,
> >>pistons
> >and cylinders were all damaged and unusable.
> >> Of note, my engine started making metal on the last oil analysis
> >>indicating something
> >wearing, the company said to retest in 25 hours, I didn't make 10. I
> >suspect the KS rod bearing failed causing the rod bolts to work harden
> >and fail.
> >> If you have any experience or knowledge you could pass on to me, please
> >>call
> >or email me.
> >>
> >> My goal is to pursue KS bearing if they are determined to be the cause
> >>of the
> >failure.
> >>
> >> Thanks,
> >> Jim Stone
> >> 502 235-3599
> >>
> >>
> >>
> >> Sent from my iPad
> >>
> >>
> >>
> >>
> >
> >
> >________________________________ Message 3
> >_____________________________________
> >
> >
> >Time: 06:05:39 PM PST US
> >From: "cybersuperstore" <nico@cybersuperstore.com>
> >Subject: RE: Rocket-List: Engine failure
> >
> >
> >Glad you are OK, Jim.
> >
> >-----Original Message-----
> >From: owner-rocket-list-server@matronics.com
> >[mailto:owner-rocket-list-server@matronics.com] On Behalf Of Jim Stone
> >Sent: Saturday, June 30, 2012 5:28 AM
> >Subject: Rocket-List: Engine failure
> >
> >
> >I had an engine failure in my Harmon Rocket (Lyc IO 540), and I am lookin
g
> >for an engine expert to have a look at all the pieces and tell me what
> >caused the failure. I have the entire engine disassembled and available
> >for
> >inspection in Louisville Kentucky.
> >
> >Or, I would like any info on KS bearing failure and their roll in engine
> >failures. My engine failed with less than 400 hours since 0 time
> >rebuild.
> >
> >The engine started making a faint knocking noise followed by oil temp
> >climb
> >and caution, I headed back to my field and I was on base leg when a
> >connecting rod failed and punched thru the case, I landed without further
> >incident.
> >
> >The engine seized just after touchdown. The case, crank, cam, rods,
> >pistons
> >and cylinders were all damaged and unusable.
> >Of note, my engine started making metal on the last oil analysis
> >indicating
> >something wearing, the company said to retest in 25 hours, I didn't make
> >10.
> >I suspect the KS rod bearing failed causing the rod bolts to work harden
> >and
> >fail.
> >If you have any experience or knowledge you could pass on to me, please
> >call
> >or email me.
> >
> >My goal is to pursue KS bearing if they are determined to be the cause o
f
> >the failure.
> >
> >Thanks,
> >Jim Stone
> >502 235-3599
> >
> >
> >Sent from my iPad
> >
> >http://www.matronics.com/contri==============
=
>
>
>
>
>
> //www.matronics.com/Navigator?Rocket-List
> com
> ronics.com/contribution
>
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Need a right elevator |
Ok, thanks, I am working on one that is a little closer, should know this
afternoon and will get back in touch.
Ernest
From: Brian Adams <md11plt@sbcglobal.net>
Subject: Re: Rocket-List: Need a right elevator
Ernest,
Location, Reno, NV
Let me know if you need it. It is also the same as Miles. Needs weights
and tip.
Brian
Sent from my iPhone
On Oct 19, 2012, at 4:54, Ernest Hale <ernest@flmitigation.com> wrote:
> Hey Miles,
>
> Thanks for responding, it actually is a HRII that I put the sliding canopy on.
> I think we have one spotted but will let you know if that doesn't work out.
> Where are you located? I am in Jacksonville, FL.
>
> Ernest
>
> From: Bowen Miles <cessna170bdriver@yahoo.com>
> Date: Thursday, October 18, 2012 9:36 PM
> To: <rocket-list@matronics.com>
> Subject: Re: Rocket-List: Need a right elevator
>
> Ernest,
>
> If you had your canopy "back" instead of "over", I assume you've got an F-1
> instead of an HRII. If so, I doubt you're interested, but I have a 90%
> complete (needs counterweights and fiberglass) set of elevators for an HRII
> (0.016 skins).
>
> Miles
>
> --- On Thu, 10/18/12, Ernest Hale <ernest@flmitigation.com> wrote:
>>
>> From: Ernest Hale <ernest@flmitigation.com>
>> Subject: Rocket-List: Need a right elevator
>> To: rocket-list@matronics.com, "Rocket-List Digest List"
>> <rocket-list-digest@matronics.com>
>> Date: Thursday, October 18, 2012, 5:07 PM
>>
>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=ernest@flmitigation.com> >
>>
>> I had an unfortunate incident today where while I was running the engine
>> up on my Rocket with the canopy back the canopy took a departure from the
>> plane and hit my right elevator. Does anyone have one that they would
>> like to sell? Right elevator that is.
>>
>> You can reach me here or at ernest@flmitigation.com
>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=ernest@flmitigation.com> .
>>
>> Thanks,
>>
>> Ernest Hale
>>
>> On 7/1/12 3:00 AM, "Rocket-List Digest Server" <rocket-list@matronics.com
>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=rocket-list@matronics.com> >
>> wrote:
>>
>>> >*
>>> >
>>> > ========================
>>> > Online Versions of Today's List Digest Archive
>>> > ========================
>>> >
>>> >Today's complete Rocket-List Digest can also be found in either of the
>>> >two Web Links listed below. The .html file includes the Digest formatted
>>> >in HTML for viewing with a web browser and features Hyperlinked Indexes
>>> >and Message Navigation. The .txt file includes the plain ASCII version
>>> >of the Rocket-List Digest and can be viewed with a generic text editor
>>> >such as Notepad or with a web browser.
>>> >
>>> >HTML Version:
>>> >
>>> >
>>> >http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapt
>>> >er 12-06-30&Archive=Rocket
>>> >
>>> >Text Version:
>>> >
>>> >
>>> >http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapte
>>> >r 12-06-30&Archive=Rocket
>>> >
>>> >
>>> > ======================
>>> > EMail Version of Today's List Digest Archive
>>> > ======================
>>> >
>>> >
>>> > ----------------------------------------------------------
>>> > Rocket-List Digest Archive
>>> > ---
>>> > Total Messages Posted Sat 06/30/12: 3
>>> > ----------------------------------------------------------
>>> >
>>> >
>>> >Today's Message Index:
>>> >----------------------
>>> >
>>> > 1. 05:28 AM - Engine failure (Jim Stone)
>>> > 2. 09:17 AM - Re: Engine failure (Rob Ray)
>>> > 3. 06:05 PM - Re: Engine failure (cybersuperstore)
>>> >
>>> >
>>> >
>>> >________________________________ Message 1
>>> >_____________________________________
>>> >
>>> >
>>> >Time: 05:28:09 AM PST US
>>> >Subject: Rocket-List: Engine failure
>>> >From: Jim Stone <jrstone@insightbb.com
>>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=jrstone@insightbb.com> >
>>> >
>>> >
>>> >I had an engine failure in my Harmon Rocket (Lyc IO 540), and I am
>>> >looking for
>>> >an engine expert to have a look at all the pieces and tell me what caused
>>> >the
>>> >failure. I have the entire engine disassembled and available for
>>> >inspection in
>>> >Louisville Kentucky.
>>> >
>>> >Or, I would like any info on KS bearing failure and their roll in engine
>>> >failures.
>>> >My engine failed with less than 400 hours since 0 time rebuild.
>>> >
>>> >The engine started making a faint knocking noise followed by oil temp
>>> >climb and
>>> >caution, I headed back to my field and I was on base leg when a
>>> >connecting rod
>>> >failed and punched thru the case, I landed without further incident.
>>> >
>>> >The engine seized just after touchdown. The case, crank, cam, rods,
>>> >pistons and
>>> >cylinders were all damaged and unusable.
>>> >Of note, my engine started making metal on the last oil analysis
>>> >indicating something
>>> >wearing, the company said to retest in 25 hours, I didn't make 10. I
>>> >suspect
>>> >the KS rod bearing failed causing the rod bolts to work harden and fail.
>>> >If you have any experience or knowledge you could pass on to me, please
>>> >call or
>>> >email me.
>>> >
>>> >My goal is to pursue KS bearing if they are determined to be the cause of
>>> >the failure.
>>> >
>>> >
>>> >Thanks,
>>> >Jim Stone
>>> >502 235-3599
>>> >
>>> >
>>> >Sent from my iPad
>>> >
>>> >
>>> >________________________________ Message 2
>>> >_____________________________________
>>> >
>>> >
>>> >Time: 09:17:35 AM PST US
>>> >From: Rob Ray <smokyray@rocketmail.com
>>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=smokyray@rocketmail.com> >
>>> >Subject: Re: Rocket-List: Engine failure
>>> >
>>> >
>>> >Jim,
>>> > I will visit my Lycoming expert friend JR next week and share your
>>> >experience.
>>> >I will let you know what transpires.
>>> >
>>> >Smokey
>>> >
>>> >Sent from my iPhone
>>> >
>>> >On Jun 30, 2012, at 8:27, Jim Stone <jrstone@insightbb.com
>>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=jrstone@insightbb.com> >
>>> wrote:
>>> >
>>>> >>
>>>> >> I had an engine failure in my Harmon Rocket (Lyc IO 540), and I am
>>>> >>looking for
>>> >an engine expert to have a look at all the pieces and tell me what caused
>>> >the
>>> >failure. I have the entire engine disassembled and available for
>>> >inspection
>>> >in Louisville Kentucky.
>>>> >>
>>>> >> Or, I would like any info on KS bearing failure and their roll in
>>>> >>engine failures.
>>> >My engine failed with less than 400 hours since 0 time rebuild.
>>>> >>
>>>> >> The engine started making a faint knocking noise followed by oil temp
>>>> >>climb and
>>> >caution, I headed back to my field and I was on base leg when a connecting
>>> >rod failed and punched thru the case, I landed without further incident.
>>>> >>
>>>> >> The engine seized just after touchdown. The case, crank, cam, rods,
>>>> >>pistons
>>> >and cylinders were all damaged and unusable.
>>>> >> Of note, my engine started making metal on the last oil analysis
>>>> >>indicating something
>>> >wearing, the company said to retest in 25 hours, I didn't make 10. I
>>> >suspect the KS rod bearing failed causing the rod bolts to work harden
>>> >and fail.
>>>> >> If you have any experience or knowledge you could pass on to me, please
>>>> >>call
>>> >or email me.
>>>> >>
>>>> >> My goal is to pursue KS bearing if they are determined to be the cause
>>>> >>of the
>>> >failure.
>>>> >>
>>>> >> Thanks,
>>>> >> Jim Stone
>>>> >> 502 235-3599
>>>> >>
>>>> >>
>>>> >>
>>>> >> Sent from my iPad
>>>> >>
>>>> >>
>>>> >>
>>>> >>
>>> >
>>> >
>>> >________________________________ Message 3
>>> >_____________________________________
>>> >
>>> >
>>> >Time: 06:05:39 PM PST US
>>> >From: "cybersuperstore" <nico@cybersuperstore.com
>>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=nico@cybersuperstore.com> >
>>> >Subject: RE: Rocket-List: Engine failure
>>> >
>>> >
>>> >Glad you are OK, Jim.
>>> >
>>> >-----Original Message-----
>>> >From: owner-rocket-list-server@matronics.com
>>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=owner-rocket-list-server@matr
>>> onics.com>
>>> >[mailto:owner-rocket-list-server@matronics.com
>>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=owner-rocket-list-server@matr
>>> onics.com> ] On Behalf Of Jim Stone
>>> >Sent: Saturday, June 30, 2012 5:28 AM
>>> >Subject: Rocket-List: Engine failure
>>> >
>>> >
>>> >I had an engine failure in my Harmon Rocket (Lyc IO 540), and I am looking
>>> >for an engine expert to have a look at all the pieces and tell me what
>>> >caused the failure. I have the entire engine disassembled and available
>>> >for
>>> >inspection in Louisville Kentucky.
>>> >
>>> >Or, I would like any info on KS bearing failure and their roll in engine
>>> >failures. My engine failed with less than 400 hours since 0 time
>>> >rebuild.
>>> >
>>> >The engine started making a faint knocking noise followed by oil temp
>>> >climb
>>> >and caution, I headed back to my field and I was on base leg when a
>>> >connecting rod failed and punched thru the case, I landed without further
>>> >incident.
>>> >
>>> >The engine seized just after touchdown. The case, crank, cam, rods,
>>> >pistons
>>> >and cylinders were all damaged and unusable.
>>> >Of note, my engine started making metal on the last oil analysis
>>> >indicating
>>> >something wearing, the company said to retest in 25 hours, I didn't make
>>> >10.
>>> >I suspect the KS rod bearing failed causing the rod bolts to work harden
>>> >and
>>> >fail.
>>> >If you have any experience or knowledge you could pass on to me, please
>>> >call
>>> >or email me.
>>> >
>>> >My goal is to pursue KS bearing if they are determined to be the cause of
>>> >the failure.
>>> >
>>> >Thanks,
>>> >Jim Stone
>>> >502 235-3599
>>> >
>>> >
>>> >Sent from my iPad
>>> >
>>> >http://www.matronics.com/contri===============
>>
>>
>>
>
>
> //www.matronics.com/Navigator?Rocket-List
> com
> ronics.com/contribution <http://ronics.com/contribution>
>
>
> ==================================
> tp://www.matronics.com/Navigator?Rocket-List
> ==================================
> cs.com
> ==================================
> matronics.com/contribution
> ==================================
>
>
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Need a right elevator |
G'day Earnest,
Sorry to hear about your misfortune ... I know how much work goes into that
slider and empennage. Was it because the retainers let go at the back of
the canopy track? Is there something we can all learn from this?
Kind regards, Stu
F1 Rocket VH-FLY <http://www.mykitlog.com/RockFLY>
http://www.mykitlog.com/RockFLY <about:www.teamrocketaircraft.com>
www.teamrocketaircraft.com
_____
From: owner-rocket-list-server@matronics.com
[mailto:owner-rocket-list-server@matronics.com] On Behalf Of Ernest Hale
Sent: Friday, October 19, 2012 11:55 PM
Subject: Re: Rocket-List: Need a right elevator
Hey Miles,
Thanks for responding, it actually is a HRII that I put the sliding canopy
on. I think we have one spotted but will let you know if that doesn't work
out. Where are you located? I am in Jacksonville, FL.
Ernest
From: Bowen Miles <cessna170bdriver@yahoo.com>
Subject: Re: Rocket-List: Need a right elevator
Ernest,
If you had your canopy "back" instead of "over", I assume you've got an F-1
instead of an HRII. If so, I doubt you're interested, but I have a 90%
complete (needs counterweights and fiberglass) set of elevators for an HRII
(0.016 skins).
Miles
--- On Thu, 10/18/12, Ernest Hale <ernest@flmitigation.com> wrote:
From: Ernest Hale <ernest@flmitigation.com>
Subject: Rocket-List: Need a right elevator
<rocket-list-digest@matronics.com>
<http://us.mc1815.mail.yahoo.com/mc/compose?to=ernest@flmitigation.com> >
I had an unfortunate incident today where while I was running the engine
up on my Rocket with the canopy back the canopy took a departure from the
plane and hit my right elevator. Does anyone have one that they would
like to sell? Right elevator that is.
You can reach me here or at ernest@flmitigation.com
<http://us.mc1815.mail.yahoo.com/mc/compose?to=ernest@flmitigation.com> .
Thanks,
Ernest Hale
On 7/1/12 3:00 AM, "Rocket-List Digest Server" <rocket-list@matronics.com
<http://us.mc1815.mail.yahoo.com/mc/compose?to=rocket-list@matronics.com> >
wrote:
>*
>
> ========================
> Online Versions of Today's List Digest Archive
> ========================
>
>Today's complete Rocket-List Digest can also be found in either of the
>two Web Links listed below. The .html file includes the Digest formatted
>in HTML for viewing with a web browser and features Hyperlinked Indexes
>and Message Navigation. The .txt file includes the plain ASCII version
>of the Rocket-List Digest and can be viewed with a generic text editor
>such as Notepad or with a web browser.
>
>HTML Version:
>
>
>http://www.matronics.com/digest/digestview.php?Style=82701
<http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapt>
&View=html&Chapt
>er 12-06-30&Archive=Rocket
>
>Text Version:
>
>
>http://www.matronics.com/digest/digestview.php?Style=82701
<http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapte>
&View=txt&Chapte
>r 12-06-30&Archive=Rocket
>
>
> ======================
> EMail Version of Today's List Digest Archive
> ======================
>
>
> ----------------------------------------------------------
> Rocket-List Digest Archive
> ---
> Total Messages Posted Sat 06/30/12: 3
> ----------------------------------------------------------
>
>
>Today's Message Index:
>----------------------
>
> 1. 05:28 AM - Engine failure (Jim Stone)
> 2. 09:17 AM - Re: Engine failure (Rob Ray)
> 3. 06:05 PM - Re: Engine failure (cybersuperstore)
>
>
>
>________________________________ Message 1
>_____________________________________
>
>
>Time: 05:28:09 AM PST US
>Subject: Rocket-List: Engine failure
>From: Jim Stone <jrstone@insightbb.com
<http://us.mc1815.mail.yahoo.com/mc/compose?to=jrstone@insightbb.com> >
>
>
>I had an engine failure in my Harmon Rocket (Lyc IO 540), and I am
>looking for
>an engine expert to have a look at all the pieces and tell me what caused
>the
>failure. I have the entire engine disassembled and available for
>inspection in
>Louisville Kentucky.
>
>Or, I would like any info on KS bearing failure and their roll in engine
>failures.
>My engine failed with less than 400 hours since 0 time rebuild.
>
>The engine started making a faint knocking noise followed by oil temp
>climb and
>caution, I headed back to my field and I was on base leg when a
>connecting rod
>failed and punched thru the case, I landed without further incident.
>
>The engine seized just after touchdown. The case, crank, cam, rods,
>pistons and
>cylinders were all damaged and unusable.
>Of note, my engine started making metal on the last oil analysis
>indicating something
>wearing, the company said to retest in 25 hours, I didn't make 10. I
>suspect
>the KS rod bearing failed causing the rod bolts to work harden and fail.
>If you have any experience or knowledge you could pass on to me, please
>call or
>email me.
>
>My goal is to pursue KS bearing if they are determined to be the cause of
>the failure.
>
>
>Thanks,
>Jim Stone
>502 235-3599
>
>
>Sent from my iPad
>
>
>________________________________ Message 2
>_____________________________________
>
>
>Time: 09:17:35 AM PST US
>From: Rob Ray <smokyray@rocketmail.com
<http://us.mc1815.mail.yahoo.com/mc/compose?to=smokyray@rocketmail.com> >
>Subject: Re: Rocket-List: Engine failure
>
>
>Jim,
> I will visit my Lycoming expert friend JR next week and share your
>experience.
>I will let you know what transpires.
>
>Smokey
>
>Sent from my iPhone
>
>On Jun 30, 2012, at 8:27, Jim Stone <jrstone@insightbb.com
<http://us.mc1815.mail.yahoo.com/mc/compose?to=jrstone@insightbb.com> >
wrote:
>
>>
>> I had an engine failure in my Harmon Rocket (Lyc IO 540), and I am
>>looking for
>an engine expert to have a look at all the pieces and tell me what caused
>the
>failure. I have the entire engine disassembled and available for
>inspection
>in Louisville Kentucky.
>>
>> Or, I would like any info on KS bearing failure and their roll in
>>engine failures.
>My engine failed with less than 400 hours since 0 time rebuild.
>>
>> The engine started making a faint knocking noise followed by oil temp
>>climb and
>caution, I headed back to my field and I was on base leg when a connecting
>rod failed and punched thru the case, I landed without further incident.
>>
>> The engine seized just after touchdown. The case, crank, cam, rods,
>>pistons
>and cylinders were all damaged and unusable.
>> Of note, my engine started making metal on the last oil analysis
>>indicating something
>wearing, the company said to retest in 25 hours, I didn't make 10. I
>suspect the KS rod bearing failed causing the rod bolts to work harden
>and fail.
>> If you have any experience or knowledge you could pass on to me, please
>>call
>or email me.
>>
>> My goal is to pursue KS bearing if they are determined to be the cause
>>of the
>failure.
>>
>> Thanks,
>> Jim Stone
>> 502 235-3599
>>
>>
>>
>> Sent from my iPad
>>
>>
>>
>>
>
>
>________________________________ Message 3
>_____________________________________
>
>
>Time: 06:05:39 PM PST US
>From: "cybersuperstore" <nico@cybersuperstore.com
<http://us.mc1815.mail.yahoo.com/mc/compose?to=nico@cybersuperstore.com> >
>Subject: RE: Rocket-List: Engine failure
>
>
>Glad you are OK, Jim.
>
>-----Original Message-----
>From: owner-rocket-list-server@matronics.com
<http://us.mc1815.mail.yahoo.com/mc/compose?to=owner-rocket-list-server@matr
onics.com>
>[mailto:owner-rocket-list-server@matronics.com
<http://us.mc1815.mail.yahoo.com/mc/compose?to=owner-rocket-list-server@matr
onics.com> ] On Behalf Of Jim Stone
>Sent: Saturday, June 30, 2012 5:28 AM
>Subject: Rocket-List: Engine failure
>
>
>I had an engine failure in my Harmon Rocket (Lyc IO 540), and I am looking
>for an engine expert to have a look at all the pieces and tell me what
>caused the failure. I have the entire engine disassembled and available
>for
>inspection in Louisville Kentucky.
>
>Or, I would like any info on KS bearing failure and their roll in engine
>failures. My engine failed with less than 400 hours since 0 time
>rebuild.
>
>The engine started making a faint knocking noise followed by oil temp
>climb
>and caution, I headed back to my field and I was on base leg when a
>connecting rod failed and punched thru the case, I landed without further
>incident.
>
>The engine seized just after touchdown. The case, crank, cam, rods,
>pistons
>and cylinders were all damaged and unusable.
>Of note, my engine started making metal on the last oil analysis
>indicating
>something wearing, the company said to retest in 25 hours, I didn't make
>10.
>I suspect the KS rod bearing failed causing the rod bolts to work harden
>and
>fail.
>If you have any experience or knowledge you could pass on to me, please
>call
>or email me.
>
>My goal is to pursue KS bearing if they are determined to be the cause of
>the failure.
>
>Thanks,
>Jim Stone
>502 235-3599
>
>
>Sent from my iPad
>
>http://www.matronics.com/contri===============
//www.matronics.com/Navigator?Rocket-List
com
ronics.com/contribution
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Need a right elevator |
Yes on all accounts. I had an oil leak, we thought we fixed it. I was
about to go on a trip that was over 1,000 miles and wanted to make sure the
leak was fixed so ran the engine up to about 2,000 rpm (over the usual 1500
for mags). The canopy was all the way back since I live in FL and it is hot
here. It obviously lifted out of the track at the back which is the weak
link. If I had locked it just behind the pilot seat like I do when it is
cold it would not have happened.
Bottom line with a sliding canopy, at least like mine, do not get the prop
over 1500 rpm or you may loose it.
Ernest
N540HB
From: Stuart Hutchison <stuart@stuarthutchison.com.au>
Subject: RE: Rocket-List: Need a right elevator
G'day Earnest,
Sorry to hear about your misfortune ... I know how much work goes into that
slider and empennage. Was it because the retainers let go at the back of
the canopy track? Is there something we can all learn from this?
Kind regards, Stu
F1 Rocket VH-FLY http://www.mykitlog.com/RockFLY
<http://www.mykitlog.com/RockFLY> www.teamrocketaircraft.com
<about:www.teamrocketaircraft.com>
From: owner-rocket-list-server@matronics.com
[mailto:owner-rocket-list-server@matronics.com] On Behalf Of Ernest Hale
Sent: Friday, October 19, 2012 11:55 PM
Subject: Re: Rocket-List: Need a right elevator
Hey Miles,
Thanks for responding, it actually is a HRII that I put the sliding canopy
on. I think we have one spotted but will let you know if that doesn't work
out. Where are you located? I am in Jacksonville, FL.
Ernest
From: Bowen Miles <cessna170bdriver@yahoo.com>
Subject: Re: Rocket-List: Need a right elevator
Ernest,
If you had your canopy "back" instead of "over", I assume you've got an
F-1 instead of an HRII. If so, I doubt you're interested, but I have a 90%
complete (needs counterweights and fiberglass) set of elevators for an HRII
(0.016 skins).
Miles
--- On Thu, 10/18/12, Ernest Hale <ernest@flmitigation.com> wrote:
>
> From: Ernest Hale <ernest@flmitigation.com>
> Subject: Rocket-List: Need a right elevator
> To: rocket-list@matronics.com, "Rocket-List Digest List"
> <rocket-list-digest@matronics.com>
> Date: Thursday, October 18, 2012, 5:07 PM
>
> <http://us.mc1815.mail.yahoo.com/mc/compose?to=ernest@flmitigation.com> >
>
> I had an unfortunate incident today where while I was running the engine
> up on my Rocket with the canopy back the canopy took a departure from the
> plane and hit my right elevator. Does anyone have one that they would
> like to sell? Right elevator that is.
>
> You can reach me here or at ernest@flmitigation.com
> <http://us.mc1815.mail.yahoo.com/mc/compose?to=ernest@flmitigation.com> .
>
> Thanks,
>
> Ernest Hale
>
> On 7/1/12 3:00 AM, "Rocket-List Digest Server" <rocket-list@matronics.com
> <http://us.mc1815.mail.yahoo.com/mc/compose?to=rocket-list@matronics.com> >
> wrote:
>
>> >*
>> >
>> >
>> > Online Versions of Today's List Digest Archive
>> >
>> >
>> >Today's complete Rocket-List Digest can also be found in either of the
>> >two Web Links listed below. The .html file includes the Digest formatted
>> >in HTML for viewing with a web browser and features Hyperlinked Indexes
>> >and Message Navigation. The .txt file includes the plain ASCII version
>> >of the Rocket-List Digest and can be viewed with a generic text editor
>> >such as Notepad or with a web browser.
>> >
>> >HTML Version:
>> >
>> >
>> >http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapt
>> >er 12-06-30&Archive=Rocket
>> >
>> >Text Version:
>> >
>> >
>> >http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapte
>> >r 12-06-30&Archive=Rocket
>> >
>> >
>> > ======================
>> > EMail Version of Today's List Digest Archive
>> > ======================
>> >
>> >
>> > ----------------------------------------------------------
>> > Rocket-List Digest Archive
>> > ---
>> > Total Messages Posted Sat 06/30/12: 3
>> > ----------------------------------------------------------
>> >
>> >
>> >Today's Message Index:
>> >----------------------
>> >
>> > 1. 05:28 AM - Engine failure (Jim Stone)
>> > 2. 09:17 AM - Re: Engine failure (Rob Ray)
>> > 3. 06:05 PM - Re: Engine failure (cybersuperstore)
>> >
>> >
>> >
>> >________________________________ Message 1
>> >_____________________________________
>> >
>> >
>> >Time: 05:28:09 AM PST US
>> >Subject: Rocket-List: Engine failure
>> >From: Jim Stone <jrstone@insightbb.com
>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=jrstone@insightbb.com> >
>> >
>> >
>> >I had an engine failure in my Harmon Rocket (Lyc IO 540), and I am
>> >looking for
>> >an engine expert to have a look at all the pieces and tell me what caused
>> >the
>> >failure. I have the entire engine disassembled and available for
>> >inspection in
>> >Louisville Kentucky.
>> >
>> >Or, I would like any info on KS bearing failure and their roll in engine
>> >failures.
>> >My engine failed with less than 400 hours since 0 time rebuild.
>> >
>> >The engine started making a faint knocking noise followed by oil temp
>> >climb and
>> >caution, I headed back to my field and I was on base leg when a
>> >connecting rod
>> >failed and punched thru the case, I landed without further incident.
>> >
>> >The engine seized just after touchdown. The case, crank, cam, rods,
>> >pistons and
>> >cylinders were all damaged and unusable.
>> >Of note, my engine started making metal on the last oil analysis
>> >indicating something
>> >wearing, the company said to retest in 25 hours, I didn't make 10. I
>> >suspect
>> >the KS rod bearing failed causing the rod bolts to work harden and fail.
>> >If you have any experience or knowledge you could pass on to me, please
>> >call or
>> >email me.
>> >
>> >My goal is to pursue KS bearing if they are determined to be the cause of
>> >the failure.
>> >
>> >
>> >Thanks,
>> >Jim Stone
>> >502 235-3599
>> >
>> >
>> >Sent from my iPad
>> >
>> >
>> >________________________________ Message 2
>> >_____________________________________
>> >
>> >
>> >Time: 09:17:35 AM PST US
>> >From: Rob Ray <smokyray@rocketmail.com
>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=smokyray@rocketmail.com> >
>> >Subject: Re: Rocket-List: Engine failure
>> >
>> >
>> >Jim,
>> > I will visit my Lycoming expert friend JR next week and share your
>> >experience.
>> >I will let you know what transpires.
>> >
>> >Smokey
>> >
>> >Sent from my iPhone
>> >
>> >On Jun 30, 2012, at 8:27, Jim Stone <jrstone@insightbb.com
>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=jrstone@insightbb.com> >
>> wrote:
>> >
>>> >>
>>> >> I had an engine failure in my Harmon Rocket (Lyc IO 540), and I am
>>> >>looking for
>> >an engine expert to have a look at all the pieces and tell me what caused
>> >the
>> >failure. I have the entire engine disassembled and available for
>> >inspection
>> >in Louisville Kentucky.
>>> >>
>>> >> Or, I would like any info on KS bearing failure and their roll in
>>> >>engine failures.
>> >My engine failed with less than 400 hours since 0 time rebuild.
>>> >>
>>> >> The engine started making a faint knocking noise followed by oil temp
>>> >>climb and
>> >caution, I headed back to my field and I was on base leg when a connecting
>> >rod failed and punched thru the case, I landed without further incident.
>>> >>
>>> >> The engine seized just after touchdown. The case, crank, cam, rods,
>>> >>pistons
>> >and cylinders were all damaged and unusable.
>>> >> Of note, my engine started making metal on the last oil analysis
>>> >>indicating something
>> >wearing, the company said to retest in 25 hours, I didn't make 10. I
>> >suspect the KS rod bearing failed causing the rod bolts to work harden
>> >and fail.
>>> >> If you have any experience or knowledge you could pass on to me, please
>>> >>call
>> >or email me.
>>> >>
>>> >> My goal is to pursue KS bearing if they are determined to be the cause
>>> >>of the
>> >failure.
>>> >>
>>> >> Thanks,
>>> >> Jim Stone
>>> >> 502 235-3599
>>> >>
>>> >>
>>> >>
>>> >> Sent from my iPad
>>> >>
>>> >>
>>> >>
>>> >>
>> >
>> >
>> >________________________________ Message 3
>> >_____________________________________
>> >
>> >
>> >Time: 06:05:39 PM PST US
>> >From: "cybersuperstore" <nico@cybersuperstore.com
>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=nico@cybersuperstore.com> >
>> >Subject: RE: Rocket-List: Engine failure
>> >
>> >
>> >Glad you are OK, Jim.
>> >
>> >-----Original Message-----
>> >From: owner-rocket-list-server@matronics.com
>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=owner-rocket-list-server@matro
>> nics.com>
>> >[mailto:owner-rocket-list-server@matronics.com
>> <http://us.mc1815.mail.yahoo.com/mc/compose?to=owner-rocket-list-server@matro
>> nics.com> ] On Behalf Of Jim Stone
>> >Sent: Saturday, June 30, 2012 5:28 AM
>> >Subject: Rocket-List: Engine failure
>> >
>> >
>> >I had an engine failure in my Harmon Rocket (Lyc IO 540), and I am looking
>> >for an engine expert to have a look at all the pieces and tell me what
>> >caused the failure. I have the entire engine disassembled and available
>> >for
>> >inspection in Louisville Kentucky.
>> >
>> >Or, I would like any info on KS bearing failure and their roll in engine
>> >failures. My engine failed with less than 400 hours since 0 time
>> >rebuild.
>> >
>> >The engine started making a faint knocking noise followed by oil temp
>> >climb
>> >and caution, I headed back to my field and I was on base leg when a
>> >connecting rod failed and punched thru the case, I landed without further
>> >incident.
>> >
>> >The engine seized just after touchdown. The case, crank, cam, rods,
>> >pistons
>> >and cylinders were all damaged and unusable.
>> >Of note, my engine started making metal on the last oil analysis
>> >indicating
>> >something wearing, the company said to retest in 25 hours, I didn't make
>> >10.
>> >I suspect the KS rod bearing failed causing the rod bolts to work harden
>> >and
>> >fail.
>> >If you have any experience or knowledge you could pass on to me, please
>> >call
>> >or email me.
>> >
>> >My goal is to pursue KS bearing if they are determined to be the cause of
>> >the failure.
>> >
>> >Thanks,
>> >Jim Stone
>> >502 235-3599
>> >
>> >
>> >Sent from my iPad
>> >
>> >http://www.matronics.com/contri===============
>
>
>
//www.matronics.com/Navigator?Rocket-List
com
ronics.com/contribution
href="http://www.matronics.com/Navigator?Rocket-List">http://www.matronhref
"http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|