Today's Message Index:
----------------------
1. 10:08 AM - Re: Bendix Mags, Ground Point (Rob Ray)
2. 11:07 AM - Re: Bendix Mags, Ground Point (Nancy and Randy)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Bendix Mags, Ground Point |
You are correct. The mag schematic is posted on the Bendix website FYI.
My advice is to install electronic ignition and never look back...
Smokey
Sent from my iPhone
On Jan 21, 2013, at 10:02 PM, "viperpilot" <nsage86@comcast.net> wrote:
>
> I had my Bendix mags overhauled following a prop strike. The overhauled mags
came back with "ring-and-post" connections to replace the "cigarette" connections
I had previously. (photo attached)
>
> The left magneto has a "retard" post to which I assume my "shower of sparks"
output attaches. Both mags have a pretty evident post to which I plan to attach
the core of the P-lead wire from my magneto switches (I have two magneto switches
instead of a single key-operated starter switch.) I have wired the magneto
switches as recommended by Bob Nuckels in his book, option "B".
>
> The Question: Where does the SHIELD part of the wire get connected to the magneto
to ground it?
>
> The obvious point would be the gold-colored screw to the right and below the
left mag (and the similar screw to the left and below the right mag). Does anyone
have a similar setup with Bendix mags? Please advise.
>
> Thanks,
> Randy
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=392863#392863
>
>
>
>
> Attachments:
>
> http://forums.matronics.com//files/img_2611_209.jpg
>
>
>
>
>
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Bendix Mags, Ground Point |
Thanks, Smokey!
Randy
----- Original Message -----
From: "Rob Ray" <smokyray@rocketmail.com>
Sent: Tuesday, January 22, 2013 1:07 PM
Subject: Re: Rocket-List: Bendix Mags, Ground Point
>
> You are correct. The mag schematic is posted on the Bendix website FYI.
>
> My advice is to install electronic ignition and never look back...
>
> Smokey
> Sent from my iPhone
>
> On Jan 21, 2013, at 10:02 PM, "viperpilot" <nsage86@comcast.net> wrote:
>
>>
>> I had my Bendix mags overhauled following a prop strike. The overhauled
>> mags came back with "ring-and-post" connections to replace the
>> "cigarette" connections I had previously. (photo attached)
>>
>> The left magneto has a "retard" post to which I assume my "shower of
>> sparks" output attaches. Both mags have a pretty evident post to which I
>> plan to attach the core of the P-lead wire from my magneto switches (I
>> have two magneto switches instead of a single key-operated starter
>> switch.) I have wired the magneto switches as recommended by Bob Nuckels
>> in his book, option "B".
>>
>> The Question: Where does the SHIELD part of the wire get connected to
>> the magneto to ground it?
>>
>> The obvious point would be the gold-colored screw to the right and below
>> the left mag (and the similar screw to the left and below the right mag).
>> Does anyone have a similar setup with Bendix mags? Please advise.
>>
>> Thanks,
>> Randy
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=392863#392863
>>
>>
>>
>>
>> Attachments:
>>
>> http://forums.matronics.com//files/img_2611_209.jpg
>>
>>
>>
>>
>>
>>
>>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|