Today's Message Index:
----------------------
1. 01:30 AM - Re: Flap actuator - Warner Electric (Stuart Hutchison)
2. 05:49 AM - Re: Flap actuator - Warner Electric (Jeff Deuchar)
3. 06:47 AM - Re: Flap actuator - Warner Electric (Stuart Hutchison)
4. 07:40 AM - Re: Rocket-List Digest: 4 Msgs - 04/17/16 (Vince Frazier)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Flap actuator - Warner Electric |
When I rang the OEM about the flap actuator a few years back Jeff, I was
told that Warner Electric Part #S12-17A8-06 had been superseded by
Warner Electric Part # M1-D012-0100-A06-LN.
Caution - mine is an original and unused so far, so I have had no reason
to actually test the above advice. I only collected this data because I
was compiling a list of parts in my particular Rocket.
Cheers, Stu
> On 18 Apr 2016, at 16:53, iiNet <stuart@stuarthutchison.com.au> wrote:
>
> I did research the flap actuator a few years ago ... the part and part
# has changed, but I'll look up what I discovered when I get home from
work.
>
> I'm at stuart@stuarthutchison.com.au
<mailto:stuart@stuarthutchison.com.au> if you want talk off-list.
>
> Kind Regards, Stu
>
> Sent from my iPhone
>
> On 18 Apr 2016, at 13:28, Jeff Deuchar <rocketerf1@yahoo.ca
<mailto:rocketerf1@yahoo.ca>> wrote:
>
>> Thanks Stu.
>>
>> One more question (maybe you can answer); the electric flap unit (the
linear on the left side of the fuse), do you know where I can find one
of those?
>>
>> Regards,
>> Jeff
>>
>>
>> On Sunday, April 17, 2016 8:22 PM, iiNet
<stuart@stuarthutchison.com.au <mailto:stuart@stuarthutchison.com.au>>
wrote:
>>
>>
>> They're Newton fuel caps from the UK. There is a metal version, but
the OEM recommends the glass reinforced plastic type, which optionally
comes with a key lock.
>>
>> Kind Regards, Stu
>>
>> Sent from my iPhone
>>
>> On 18 Apr 2016, at 02:55, Jeff Deuchar <rocketerf1@yahoo.ca
<mailto:rocketerf1@yahoo.ca>> wrote:
>>
>>> Hi,
>>>
>>> Does anyone have a source for the fuel caps on the F1 Rocket (later
s/n). Be nice to know if we can get metal ones as well.
>>>
>>> Regards,
>>> Jeff
>>
>>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Flap actuator - Warner Electric |
Hi Stu,
Thanks so much for the information.
Mine has around 400 hours on it and it has started to develop a dead spot.
=C2- Usually OK as taxi and air vibrations push me past it, but it's not
getting any better.
Thanks again,Jeff
On Monday, April 18, 2016 2:29 AM, Stuart Hutchison <stuart@stuarthutch
ison.com.au> wrote:
When I rang the OEM about the flap actuator a few years back Jeff, I was t
old that Warner Electric Part #S12-17A8-06 had been superseded by Warner El
ectric Part # M1-D012-0100-A06-LN.
Caution - mine is an original and unused so far, so I have had no reason to
actually test the above advice. =C2-I only collected this data because I
was compiling a list of parts in my particular Rocket.
Cheers, Stu
On 18 Apr 2016, at 16:53, iiNet <stuart@stuarthutchison.com.au> wrote:
I did research the flap actuator a few years ago ... the part and part # ha
s changed, but I'll look up what I discovered when I get home from work.
I'm at stuart@stuarthutchison.com.au if you want talk off-list.
Kind Regards, Stu
Sent from my iPhone
On 18 Apr 2016, at 13:28, Jeff Deuchar <rocketerf1@yahoo.ca> wrote:
Thanks Stu.
One more question (maybe you can answer); the electric flap unit (the linea
r on the left side of the fuse), do you know where I can find one of those?
Regards,Jeff
On Sunday, April 17, 2016 8:22 PM, iiNet <stuart@stuarthutchison.com.au
> wrote:
They're Newton fuel caps from the UK. There is a metal version, but the OE
M recommends the glass reinforced plastic type, which optionally comes with
a key lock.=C2-
Kind Regards, Stu
Sent from my iPhone
On 18 Apr 2016, at 02:55, Jeff Deuchar <rocketerf1@yahoo.ca> wrote:
Hi,
Does anyone have a source for the fuel caps on the F1 Rocket (later s/n).
=C2- Be nice to know if we can get metal ones as well.
Regards,Jeff
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Flap actuator - Warner Electric |
You=99re welcome Jeff I look forward to having 400 hours
on mine! :-)
Cheers, Stu
> On 18 Apr 2016, at 22:48, Jeff Deuchar <rocketerf1@yahoo.ca> wrote:
>
> Hi Stu,
>
> Thanks so much for the information.
>
> Mine has around 400 hours on it and it has started to develop a dead
spot. Usually OK as taxi and air vibrations push me past it, but it's
not getting any better.
>
> Thanks again,
> Jeff
>
>
> On Monday, April 18, 2016 2:29 AM, Stuart Hutchison
<stuart@stuarthutchison.com.au> wrote:
>
>
> When I rang the OEM about the flap actuator a few years back Jeff, I
was told that Warner Electric Part #S12-17A8-06 had been superseded by
Warner Electric Part # M1-D012-0100-A06-LN.
>
> Caution - mine is an original and unused so far, so I have had no
reason to actually test the above advice. I only collected this data
because I was compiling a list of parts in my particular Rocket.
>
> Cheers, Stu
>
>
>
>
>
>
>> On 18 Apr 2016, at 16:53, iiNet <stuart@stuarthutchison.com.au
<mailto:stuart@stuarthutchison.com.au>> wrote:
>>
>> I did research the flap actuator a few years ago ... the part and
part # has changed, but I'll look up what I discovered when I get home
from work.
>>
>> I'm at stuart@stuarthutchison.com.au
<mailto:stuart@stuarthutchison.com.au> if you want talk off-list.
>>
>> Kind Regards, Stu
>>
>> Sent from my iPhone
>>
>> On 18 Apr 2016, at 13:28, Jeff Deuchar <rocketerf1@yahoo.ca
<mailto:rocketerf1@yahoo.ca>> wrote:
>>
>>> Thanks Stu.
>>>
>>> One more question (maybe you can answer); the electric flap unit
(the linear on the left side of the fuse), do you know where I can find
one of those?
>>>
>>> Regards,
>>> Jeff
>>>
>>>
>>> On Sunday, April 17, 2016 8:22 PM, iiNet
<stuart@stuarthutchison.com.au <mailto:stuart@stuarthutchison.com.au>>
wrote:
>>>
>>>
>>> They're Newton fuel caps from the UK. There is a metal version, but
the OEM recommends the glass reinforced plastic type, which optionally
comes with a key lock.
>>>
>>> Kind Regards, Stu
>>>
>>> Sent from my iPhone
>>>
>>> On 18 Apr 2016, at 02:55, Jeff Deuchar <rocketerf1@yahoo.ca
<mailto:rocketerf1@yahoo.ca>> wrote:
>>>
>>>> Hi,
>>>>
>>>> Does anyone have a source for the fuel caps on the F1 Rocket (later
s/n). Be nice to know if we can get metal ones as well.
>>>>
>>>> Regards,
>>>> Jeff
>>>
>>>
>
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Rocket-List Digest: 4 Msgs - 04/17/16 |
Mark Frederick still had some of them if I'm not mistaken. I recall seeing
some in his shop relatively recently.
If not, I think I may have one spare set. Contact me via email please.
Vince Frazier
Frazier Aviation,
a Team Rocket authorized distributor
Time: 09:56:13 AM PST US
From: Jeff Deuchar <rocketerf1@yahoo.ca>
Subject: Rocket-List: Fuel caps
Hi,
Does anyone have a source for the fuel caps on the F1 Rocket (later s/n).
=C2- Be nice to know if we can get metal ones as well.
Regards,Jeff
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|