Today's Message Index:
----------------------
1. 04:04 AM - Re: 912uls battery? (Airgriff2@aol.com)
2. 06:24 AM - Re: 912uls battery? (SJA)
3. 07:18 AM - Re: Constant Speed Propellers for 912S/ULS (Martin Pohl)
4. 08:57 AM - Re: 912uls battery for cold starting (David X)
5. 02:41 PM - Re: Re: 912uls battery? (nyterminat@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 912uls battery? |
Hi SJA and gang, is your trouble starting the 912 a "cranking issue" or a
"not starting "issue? One thing I was going to through out is that the manual
says that the throttle must be at "idle position for the "cold starting
sequence" to be activated. (something to do with the carburetors)?
Fly Safe
Bob Griffin
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 912uls battery? |
--> RotaxEngines-List message posted by: "SJA" <salbore@netzero.net>
Thanks for the replys.
The battery I have is a motorcycle battery: has 300 cca @ 70 degrees, but that
goes south of course at colder temps. It's an "Extreme" brand. The battery box
is small (3.5x 6.0 x 7.0H) ROtax manual says at least 16ah, this battery is
18ah The battery is new in Dec.
I know the ignition takes a lot of juice to spin (I dont have the HD starter) and
that the engine has to go to 300rpm to start. When I try to start it, voltmeter
says `13.9 or so. After the first or second crank, it drops to 10.5. And
then we're done. This week Im going to jump the battery and see what happens.
Any further suggestions about brand of battery? Im looking at the Odyssey 680.
Thanks.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=19890#19890
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Constant Speed Propellers for 912S/ULS |
--> RotaxEngines-List message posted by: "Martin Pohl" <mpohl@pohltec.ch>
I will ask my friend, if he has some experience with the normal prop for the Remos.
Martin
--------
________________________
Martin Pohl
Zodiac XL QBK
8645 Jona, Switzerland
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=19902#19902
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 912uls battery for cold starting |
--> RotaxEngines-List message posted by: "David X" <dxj@comcast.net>
There are several VARTA models. Can you recommend a specific model?
--------
Zodiac 601 XL - CZAW Built - Rotax 912S
DO NOT ARCHIVE
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=19919#19919
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 912uls battery? |
I am using the Odessey 680 and have no problems with cold weather starts. I am
also using Mobile One motorcycle oil.
Bob Spudis
N701ZX/912S
do not archive
-----Original Message-----
From: SJA <salbore@netzero.net>
Sent: Mon, 6 Mar 2006 06:23:22 -0800
Subject: RotaxEngines-List: Re: 912uls battery?
--> RotaxEngines-List message posted by: "SJA" <salbore@netzero.net>
Thanks for the replys.
The battery I have is a motorcycle battery: has 300 cca @ 70 degrees, but that
goes south of course at colder temps. It's an "Extreme" brand. The battery box
is small (3.5x 6.0 x 7.0H) ROtax manual says at least 16ah, this battery is
18ah The battery is new in Dec.
I know the ignition takes a lot of juice to spin (I dont have the HD starter)
and that the engine has to go to 300rpm to start. When I try to start it,
voltmeter says `13.9 or so. After the first or second crank, it drops to 10.5.
And then we're done. This week Im going to jump the battery and see what
happens.
Any further suggestions about brand of battery? Im looking at the Odyssey 680.
Thanks.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=19890#19890
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|