---------------------------------------------------------- RotaxEngines-List Digest Archive --- Total Messages Posted Wed 04/25/07: 10 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:18 AM - 914 rotax (Nihl C. Storey) 2. 10:18 AM - xx (Nihl C. Storey) 3. 10:18 AM - engine for sale (Nihl C. Storey) 4. 10:18 AM - gg (Nihl C. Storey) 5. 10:18 AM - 914 (Nihl C. Storey) 6. 10:18 AM - gg (Nihl C. Storey) 7. 10:35 AM - 914 turbo (yahoo mail) 8. 11:23 AM - Re: 582 Exhaust Ball Joints (Duncan & Ami McFadyean) 9. 12:56 PM - Re: regulator rectifier (Dave) 10. 09:43 PM - 503 oil (Les Goldner) ________________________________ Message 1 _____________________________________ Time: 10:18:33 AM PST US From: "Nihl C. Storey" Subject: RotaxEngines-List: 914 rotax Rotax 914 for sale. 25 hrs flight time. also GR 4000 EIS available contact nihlc@sbcglobal.net ________________________________ Message 2 _____________________________________ Time: 10:18:33 AM PST US From: "Nihl C. Storey" Subject: RotaxEngines-List: xx rty ________________________________ Message 3 _____________________________________ Time: 10:18:33 AM PST US From: "Nihl C. Storey" Subject: RotaxEngines-List: engine for sale Rotax 914 engine for sale: 25 hrs. first oil change done also Grand Rapids 4000EIS available. contact N. Storey at nihlc@sbcglobal.net ________________________________ Message 4 _____________________________________ Time: 10:18:33 AM PST US From: "Nihl C. Storey" Subject: RotaxEngines-List: gg gg ________________________________ Message 5 _____________________________________ Time: 10:18:34 AM PST US From: "Nihl C. Storey" Subject: RotaxEngines-List: 914 914 Rotax for sale. 25 hours flight time also GR 4000 EIS available. Please contact ncstorey@sbcglobal.net ________________________________ Message 6 _____________________________________ Time: 10:18:52 AM PST US From: "Nihl C. Storey" Subject: RotaxEngines-List: gg gg ________________________________ Message 7 _____________________________________ Time: 10:35:39 AM PST US From: "yahoo mail" Subject: RotaxEngines-List: 914 turbo Rotax 914 turbo for sale complete 25hrs flight time.$25,000 Also GR 4000 EIS available set up to work with 914 $600.00 Engine mounted in SeaRey Experimental to be parted out.Contact nihlc@sbcglobal.net or call 517 617 1388 ________________________________ Message 8 _____________________________________ Time: 11:23:58 AM PST US From: "Duncan & Ami McFadyean" Subject: Re: RotaxEngines-List: 582 Exhaust Ball Joints I've achieved success with these by lapping the ball joint pairs with valve grinding paste. Still need the copper slip though. Unfortunately I then had some additional spring hooks welded on and the welder managed to irrecoverably distort them (in a vice, rather than weld-distortion). Duncan McF. ----- Original Message ----- rt the balls From: "Guy Buchanan" Sent: Wednesday, April 25, 2007 1:09 AM Subject: RotaxEngines-List: 582 Exhaust Ball Joints > > All, > I'm looking for good ideas on how to seal the 582 exhaust ball > joints. I've used copper anti-seize in the past but it just blows out. (My > joints don't fit very well for some reason.) Today I re-worked the joints > to fit better but I thought there might be some good ideas out there as to > how to seal them while leaving them flexible. (I had an idea of brazing > them together, then knocking out the male piece, leaving a perfect fitting > bronze bushing, but I haven't tried it yet.) > > > Guy Buchanan > San Diego, CA > K-IV 1200 / 582-C / Warp / 100% done, thanks mostly to Bob Ducar. > > > ________________________________ Message 9 _____________________________________ Time: 12:56:05 PM PST US From: "Dave" Subject: RE: RotaxEngines-List: regulator rectifier I know of several people that have gone through multiple failures of Harley regulators in production bikes. I'd not put one in my plane! Dave -----Original Message----- From: owner-rotaxengines-list-server@matronics.com [mailto:owner-rotaxengines-list-server@matronics.com]On Behalf Of Gerald Jantzi Sent: Tuesday, April 24, 2007 7:23 PM To: Rotax Engines Subject: RotaxEngines-List: regulator rectifier Thanks for the information so far Gilles the web sight you recommended seems like A great site however trying. to navigate thru it a lot of things come up in french.I am considering A Harley Davidson reg. series type . Wold like to get some more feed back to see if this is the way to go or not Gerry ---------------------------------------------------------------------------- -- Ahhh...imagining that irresistible "new car" smell? Check out new cars at Yahoo! Autos. ________________________________ Message 10 ____________________________________ Time: 09:43:46 PM PST US From: "Les Goldner" Subject: RotaxEngines-List: 503 oil I have a supply of Kendall GT1, a 2-cycle ashless dispersant/detergent oil that meets NMMA TC-W, W3, WII standards. Is this an acceptable oil for use in my Rotax 503? Thanks for the help, Les ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rotaxengines-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RotaxEngines-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rotaxengines-list Browse Digests http://www.matronics.com/digest/rotaxengines-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.