---------------------------------------------------------- RotaxEngines-List Digest Archive --- Total Messages Posted Tue 07/10/07: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 11:46 AM - Wire cross-sections (Fergus Kyle) 2. 02:05 PM - Re: Wire cross-sections (Rob Housman) 3. 02:48 PM - Wire cross-sections (Richard Holder) 4. 02:49 PM - Wire cross-sections (Richard Holder) 5. 07:14 PM - Re: Fuel Octane for 912 Engine with ethanol (Noel Loveys) ________________________________ Message 1 _____________________________________ Time: 11:46:40 AM PST US From: "Fergus Kyle" Subject: RotaxEngines-List: Wire cross-sections Cheers, Has anyone found an easy chart to convert the European wire cross-sectional dimensions (in square millimetres) to their North American counterparts (in SWG values)? The torture of calculating each one is causing a constant buzz...... Ferg Europa A064 914 mono ________________________________ Message 2 _____________________________________ Time: 02:05:01 PM PST US From: "Rob Housman" Subject: RE: RotaxEngines-List: Wire cross-sections Ferg: This might be what you need: http://www.reade.com/Conversion/wire_gauge.html Best regards, Rob Housman Irvine, California Europa XS Tri-Gear S/N A070 Airframe complete From: owner-rotaxengines-list-server@matronics.com [mailto:owner-rotaxengines-list-server@matronics.com] On Behalf Of Fergus Kyle Sent: Tuesday, July 10, 2007 11:46 AM Subject: RotaxEngines-List: Wire cross-sections Cheers, Has anyone found an easy chart to convert the European wire cross-sectional dimensions (in square millimetres) to their North American counterparts (in SWG values)? The torture of calculating each one is causing a constant buzz...... Ferg Europa A064 914 mono ________________________________ Message 3 _____________________________________ Time: 02:48:47 PM PST US From: Richard Holder Subject: RotaxEngines-List: Wire cross-sections You might look at the Europa manual, section 25 page 3. Download from the technical page of the Europa Aircraft website. I have had this on the wall of my study for the last few years ! Richard G-OWWW High Cross Stuck on the ground :-( Electrics working, everything working ! Waiting for the PFA :-( Fergus Kyle wrote: > Cheers, Has anyone found an easy chart to convert the > European wire cross-sectional dimensions (in square > millimetres) to their North American counterparts (in > SWG values)? The torture of calculating each one is > causing a constant buzz...... Ferg Europa A064 914 mono > > ________________________________ Message 4 _____________________________________ Time: 02:49:24 PM PST US From: Richard Holder Subject: RotaxEngines-List: Wire cross-sections PS - I though you Americans used AWG not SWG ! Richard ! Fergus Kyle wrote: > Cheers, > Has anyone found an easy chart to convert the European wire > cross-sectional dimensions (in square millimetres) to their North American > counterparts (in SWG values)? The torture of calculating each one is causing > a constant buzz...... > Ferg > Europa A064 914 mono > ________________________________ Message 5 _____________________________________ Time: 07:14:24 PM PST US From: "Noel Loveys" Subject: RotaxEngines-List: Re: Fuel Octane for 912 Engine with ethanol What are the idiots excuse for the ethanol contamination??? Less carbon into the atmosphere??? Maybe if you don't count all the CO2 given off in the fermentation process. Maybe a saving in fossil fuels??? Only if you don't count the Diesel fuel used in the growing and shipping process...not to mention the distillation process. Ethanol should be used for cleaning... It's corrosive enough to clean anything or drinking. You shouldn't get drinking and driving confused. The only other thing ethanol is good for is buying votes in farm country. In a few years they will wonder what kind of insanity was occurring with this ethanol fiasco. Once again Ethanol is a lot less than a stop gap and a million miles from an answer! Do yourself a favour kick scream and other wise try to legally dissuade the morons from ethanol contamination. I haven't even gotten close to the reasons it should not go into any airplane. Noel > Subject: RotaxEngines-List: Re: Fuel Octane for 912 Engine > with Ethanol > From: "Roger Lee" > > > Hi Guys, > > Just read in this mornings newspaper that several > organizations are pushing for > 20% ethanol in our fuel. 20% won't be good. > 5-10% well, ok, if we have too, but not 20%. Let's hope this > doesn't come to pass. > > -------- > Roger Lee > Tucson, Az. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rotaxengines-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RotaxEngines-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rotaxengines-list Browse Digests http://www.matronics.com/digest/rotaxengines-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.