Today's Message Index:
----------------------
1. 04:11 PM - Re: 912ULS: Carburettor and Airbox venting lines (Tommy Walker)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 912ULS: Carburettor and Airbox venting lines |
Roy,
Do you have a picture of your vent line setup that you could share?
Many thanks,
Tommy Walker in Alabama
N8701
N601RT wrote:
> Martin and Roger,
>
> (This is my first posting to this list. I've been lurking for a while.)
>
> I've routed standard length vent line into a much larger tube which goes to the
bottom of my cowl. There is about 3/4inch of the smaller line in the larger
line. This allows any fuel that might come out of the vent line to flow into
the larger line AND it allows the vent line to have the same pressure at the carb.
>
> Regards,
>
> Roy
> N601RT: 2002 CH601HDS, nose gear, Rotax 912ULS, Arplast PV-50, All electric,
IFR, equipped, 895hrs
--------
Tommy Walker
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=153731#153731
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|