Today's Message Index:
----------------------
1. 08:55 AM - IVO Prop / Manifold Pressure Setting? (rtoth1)
2. 12:09 PM - Re: Re: Engine RPM (Joe Ronco)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | IVO Prop / Manifold Pressure Setting? |
With a 912ULS and an IVO Medium in-flt. adjustable prop, what manifold
pressure / RPM is anyone setting the prop at for cruise?
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
And don't forget the Rotax tuned exhaust if you don't already have it. It is
also required with the airbox to get the published 100 HP @ 5,800 RPM.
Joe R
-----Original Message-----
From: owner-rotaxengines-list-server@matronics.com
[mailto:owner-rotaxengines-list-server@matronics.com] On Behalf Of Rich
Sent: Saturday, February 23, 2008 2:29 PM
Subject: RotaxEngines-List: Re: Engine RPM
Roger,
I have the 912ULS w/o an airbox so less than 100hp. I have adjusted the
prop where I like it now. The s-7 flys at 115mph at 5300 rpm just fine. My
question is, I only get about 4600 rpm at initial ground role with full
throttle. Climb out is 4800 and it will still go to 5600 on cruise. It gets
off in less than 200 feet but do you think I am lugging down the engine? I
plan to get the airbox later.
Rich
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=165817#165817
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|