Today's Message Index:
----------------------
1. 12:59 AM - AW: AW: Re: 912 with low RPM--- new vibration problem (Thilo Kind)
2. 09:25 AM - Re: 912 oil filters (avidfox)
3. 09:41 AM - Re: Re: 912 oil filters (Bayne)
4. 02:54 PM - Re: AW: Re: 912 with low RPM--- new vibration problem (Les Goldner)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: AW: Re: 912 with low RPM--- new vibration problem |
Hi Roger,
that's what I thought as well. Engine run rough at high RPMs. Took me months
to find. Once I set the choke cable, everything was fine again. STill don't
know why, but the choke was definetly the culprit.
Thilo
-----Ursprngliche Nachricht-----
Von: owner-rotaxengines-list-server@matronics.com
[mailto:owner-rotaxengines-list-server@matronics.com] Im Auftrag von Roger
Lee
Gesendet: Friday, March 14, 2008 6:13 AM
An: rotaxengines-list@matronics.com
Betreff: RotaxEngines-List: AW: Re: 912 with low RPM--- new vibration
problem
Hi Thilo,
Good advice at rpm's below 3500. The enricher does not play a part though
above 3500rpm. Certainly not above 4000. If it ran rough below 3500 then the
enricher could be the culprit, but then it should smooth out at cruise rpm.
--------
Roger Lee
Tucson, Az.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=169751#169751
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 912 oil filters |
I just installed a "spin-on" oil filter kit on a new CubCrafter Sport Cub w O-200
IAW their required Service Instructions.
They included the filter to be used..... a small K&N.
Sorry I don't have the PN handy, but it was the same size as the little Rotax filter
I have on my 912UL.
I will get the PN if anyone is interested. I have no idea at this time what thread
size it was, etc... Just that it was a K&N product. It had the hex end for
a wrench, and was drilled for safety wiring.
Steve A&P, IA.
KitFox 5 912UL
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=169824#169824
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 912 oil filters |
It is a good chance the K&N filter is a hp-1002. I use this filter on my
O-290 which has a spin on oil filter kit.
http://www.knfilters.com/search/product.aspx?Prod=hp-1002
Bayne
RV-9A N910BJ
----- Original Message -----
From: "avidfox" <avidfox@gmail.com>
Sent: Friday, March 14, 2008 8:22 AM
Subject: RotaxEngines-List: Re: 912 oil filters
>
> I just installed a "spin-on" oil filter kit on a new CubCrafter Sport Cub
> w O-200 IAW their required Service Instructions.
>
> They included the filter to be used..... a small K&N.
>
> Sorry I don't have the PN handy, but it was the same size as the little
> Rotax filter I have on my 912UL.
>
> I will get the PN if anyone is interested. I have no idea at this time
> what thread size it was, etc... Just that it was a K&N product. It had the
> hex end for a wrench, and was drilled for safety wiring.
>
> Steve A&P, IA.
> KitFox 5 912UL
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=169824#169824
>
>
> --
> Checked by AVG.
> 12:33 PM
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: AW: Re: 912 with low RPM--- new vibration problem |
Checked the choke Roger, good idea but no cigar! The chokes were set
right... So I'm back to square 1.
I have an engine mechanic coming Wednesday.
Les
> -----Original Message-----
> From: owner-rotaxengines-list-server@matronics.com
> [mailto:owner-rotaxengines-list-server@matronics.com] On
> Behalf Of Thilo Kind
> Sent: Friday, March 14, 2008 12:50 AM
> To: rotaxengines-list@matronics.com
> Subject: AW: RotaxEngines-List: AW: Re: 912 with low RPM---
> new vibration problem
>
> --> <thilo.kind@gmx.net>
>
> Hi Roger,
>
> that's what I thought as well. Engine run rough at high RPMs.
> Took me months to find. Once I set the choke cable,
> everything was fine again. STill don't know why, but the
> choke was definetly the culprit.
>
> Thilo
>
> -----Ursprngliche Nachricht-----
> Von: owner-rotaxengines-list-server@matronics.com
> [mailto:owner-rotaxengines-list-server@matronics.com] Im
> Auftrag von Roger Lee
> Gesendet: Friday, March 14, 2008 6:13 AM
> An: rotaxengines-list@matronics.com
> Betreff: RotaxEngines-List: AW: Re: 912 with low RPM--- new
> vibration problem
>
> --> <ssadiver1@yahoo.com>
>
> Hi Thilo,
>
> Good advice at rpm's below 3500. The enricher does not play a
> part though above 3500rpm. Certainly not above 4000. If it
> ran rough below 3500 then the enricher could be the culprit,
> but then it should smooth out at cruise rpm.
>
> --------
> Roger Lee
> Tucson, Az.
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=169751#169751
>
>
>
>
>
>
>
>
>
>
>
> Photoshare, and much much more:
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|