---------------------------------------------------------- RotaxEngines-List Digest Archive --- Total Messages Posted Fri 03/14/08: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:59 AM - AW: AW: Re: 912 with low RPM--- new vibration problem (Thilo Kind) 2. 09:25 AM - Re: 912 oil filters (avidfox) 3. 09:41 AM - Re: Re: 912 oil filters (Bayne) 4. 02:54 PM - Re: AW: Re: 912 with low RPM--- new vibration problem (Les Goldner) ________________________________ Message 1 _____________________________________ Time: 12:59:21 AM PST US From: "Thilo Kind" Subject: AW: RotaxEngines-List: AW: Re: 912 with low RPM--- new vibration problem Hi Roger, that's what I thought as well. Engine run rough at high RPMs. Took me months to find. Once I set the choke cable, everything was fine again. STill don't know why, but the choke was definetly the culprit. Thilo -----Ursprngliche Nachricht----- Von: owner-rotaxengines-list-server@matronics.com [mailto:owner-rotaxengines-list-server@matronics.com] Im Auftrag von Roger Lee Gesendet: Friday, March 14, 2008 6:13 AM An: rotaxengines-list@matronics.com Betreff: RotaxEngines-List: AW: Re: 912 with low RPM--- new vibration problem Hi Thilo, Good advice at rpm's below 3500. The enricher does not play a part though above 3500rpm. Certainly not above 4000. If it ran rough below 3500 then the enricher could be the culprit, but then it should smooth out at cruise rpm. -------- Roger Lee Tucson, Az. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=169751#169751 ________________________________ Message 2 _____________________________________ Time: 09:25:22 AM PST US Subject: RotaxEngines-List: Re: 912 oil filters From: "avidfox" I just installed a "spin-on" oil filter kit on a new CubCrafter Sport Cub w O-200 IAW their required Service Instructions. They included the filter to be used..... a small K&N. Sorry I don't have the PN handy, but it was the same size as the little Rotax filter I have on my 912UL. I will get the PN if anyone is interested. I have no idea at this time what thread size it was, etc... Just that it was a K&N product. It had the hex end for a wrench, and was drilled for safety wiring. Steve A&P, IA. KitFox 5 912UL Read this topic online here: http://forums.matronics.com/viewtopic.php?p=169824#169824 ________________________________ Message 3 _____________________________________ Time: 09:41:13 AM PST US From: "Bayne" Subject: Re: RotaxEngines-List: Re: 912 oil filters It is a good chance the K&N filter is a hp-1002. I use this filter on my O-290 which has a spin on oil filter kit. http://www.knfilters.com/search/product.aspx?Prod=hp-1002 Bayne RV-9A N910BJ ----- Original Message ----- From: "avidfox" Sent: Friday, March 14, 2008 8:22 AM Subject: RotaxEngines-List: Re: 912 oil filters > > I just installed a "spin-on" oil filter kit on a new CubCrafter Sport Cub > w O-200 IAW their required Service Instructions. > > They included the filter to be used..... a small K&N. > > Sorry I don't have the PN handy, but it was the same size as the little > Rotax filter I have on my 912UL. > > I will get the PN if anyone is interested. I have no idea at this time > what thread size it was, etc... Just that it was a K&N product. It had the > hex end for a wrench, and was drilled for safety wiring. > > Steve A&P, IA. > KitFox 5 912UL > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=169824#169824 > > > -- > Checked by AVG. > 12:33 PM > > ________________________________ Message 4 _____________________________________ Time: 02:54:33 PM PST US From: "Les Goldner" Subject: RE: RotaxEngines-List: AW: Re: 912 with low RPM--- new vibration problem Checked the choke Roger, good idea but no cigar! The chokes were set right... So I'm back to square 1. I have an engine mechanic coming Wednesday. Les > -----Original Message----- > From: owner-rotaxengines-list-server@matronics.com > [mailto:owner-rotaxengines-list-server@matronics.com] On > Behalf Of Thilo Kind > Sent: Friday, March 14, 2008 12:50 AM > To: rotaxengines-list@matronics.com > Subject: AW: RotaxEngines-List: AW: Re: 912 with low RPM--- > new vibration problem > > --> > > Hi Roger, > > that's what I thought as well. Engine run rough at high RPMs. > Took me months to find. Once I set the choke cable, > everything was fine again. STill don't know why, but the > choke was definetly the culprit. > > Thilo > > -----Ursprngliche Nachricht----- > Von: owner-rotaxengines-list-server@matronics.com > [mailto:owner-rotaxengines-list-server@matronics.com] Im > Auftrag von Roger Lee > Gesendet: Friday, March 14, 2008 6:13 AM > An: rotaxengines-list@matronics.com > Betreff: RotaxEngines-List: AW: Re: 912 with low RPM--- new > vibration problem > > --> > > Hi Thilo, > > Good advice at rpm's below 3500. The enricher does not play a > part though above 3500rpm. Certainly not above 4000. If it > ran rough below 3500 then the enricher could be the culprit, > but then it should smooth out at cruise rpm. > > -------- > Roger Lee > Tucson, Az. > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=169751#169751 > > > > > > > > > > > > Photoshare, and much much more: > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rotaxengines-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RotaxEngines-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rotaxengines-list Browse Digests http://www.matronics.com/digest/rotaxengines-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.